Vertical Amplifier
(CH 1 and CH 2) |
| Sensitivity |
5mV/Div to 20V/Div in 12 steps (1-2-5 seq)
1mV/Div to 4V/Div (X5 Mag) |
| Mag |
x5 |
| Accuracy |
±3% (5% in X5 Mag) |
| Bandwidth (-3dB) |
DC: 0Hz to 30MHz
AC: 10Hz to 30MHz |
| Rise Time |
< 18ns (<70ns in X5 Mag) |
| Input Impedance |
Res: 1MW ±5%; Cap: 30pF |
| Input Coupling |
AC, DC, GND |
| Invert Channel |
CH2 |
| CH1/CH2 Trigger Output |
100mV/Div into 50W |
| Display Modes |
CH1, CH2, ALT, Chop, ADD, X-Y |
| Maximum Input Voltage |
400V (DC or AC peak) |
| Horizontal Sweep |
| Sweep Time |
100ns/Div to 0.2s/Div in 20 steps (1-2-5 seq)
10ns/Div to 20ms/Div (X10 Mag) |
| Mag |
x10 |
| Accuracy |
±3% (8% X10 Mag) |
| Sweep Modes |
TV, Normal and Single |
| Triggering |
| Source |
CH 1, CH 2, ALT, Line and EXT |
| Slope |
Positive or Negative adjustable levels |
| Coupling |
AC, DC, Normal/TV |
| Sensitivity (Int) |
DC to 20MHz 1 Div |
| Sensitivity (Ext) |
0.3V p-p) |
| Sensitivity (TV Int) |
2 Div |
| Sensitivity (TV Ext) |
0.3V p-p |
| Trigger Lock |
50Hz to 10MHz 2 Div |
| External Trigger Input |
Impedance: 1MW ±5%
Maximum Input Voltage: 400V (DC or AC p-p) |
| Z Axis Modulation |
| Minimum Input Level |
TTL |
| Maximum Input Voltage |
50V or AC p-p |
| Polarity |
Intensity increases as the voltage decreases |
| Input Resistance |
10KW |
| Bandwidth (-3dB) |
DC to 5MHz |
| X-Y Mode |
| Inputs |
X-Axis (CH1), Y-Axis (CH2) |
| Sensitivity |
Same as CH1 |
| Frequency Response (-3dB) |
DC: 0Hz to 1MHz
AC: 10Hz to 1MHz |
| Maximum Voltage |
Same as CH1 |
| X-Y Phase Difference |
< 3° |
| Calibrator Signal |
| Waveform |
Square Wave |
| Amplitude |
0.5V ±2% p-p |
| Frequency |
1KHz ±2% |
| Component Test |
| |
A 60Hz, 9V RMS signal is applied to the CH1 and CH2 input when the AC, DC, GND is in the GND position and the component test button is pushed in. |
| General Specifications |
| CRT |
8cm x 10cm (3.15" x 3.94") |
| Power Requirements |
AC Input Voltage: 120V or 220V |
| Frequency |
50/60Hz |
| Power Consumption |
35W |
| Operating Temperature |
0 to 40°C (32 to 104°F) |
| Size |
5.1" (H) x 12.2" (W) x 16.45" (D) |
| Weight |
14.3 lbs |
| Accessories |
Manual, Line cord, X1/X10 Probes (2), Test Leads |
;)
