Vertical Amplifier
(CH 1 and CH 2) |
| Sensitivity |
5mV/Div to 5V/Div in 10 steps (1-2-5 seq) |
| Accuracy |
±3% |
| Bandwidth (-3dB) |
DC: 0Hz to 20MHz, AC: 10Hz to 20MHz |
| Rise Time |
< 17.5ns |
| Input Impedance |
Res: 1MW ±5%
Cap: 25pF ±5pF |
| Input Coupling |
AC, DC, GND |
| Invert Channel |
CH2 |
| Display Modes |
CH1, CH2, ALT, Chop, ADD, X-Y |
| Maximum Input Voltage |
400V (DC or AC p-p) |
| Horizontal Sweep |
| Sweep Time |
200ns/Div to 0.5s/Div in 20 steps (1-2-5 seq)
(X10 Mag: 20ns/Div to 50ms/Div) |
| Mag |
x10 |
| Accuracy |
±3% (8% X10 Mag) |
| Sweep Modes |
TV, Normal, Auto and p-p Auto |
| Triggering |
| Source |
CH 1, CH 2, ALT, Line and EXT |
| Slope |
Positive or Negative adjustable levels |
| Coupling |
AC |
| Sensitivity (Int) |
DC to 10MHz (1 Div)
DC to 20MHz (1.5 Div) |
| Sensitivity (Ext) |
DC to 10MHz (0.3 p-p)
DC to 20MHz (0.5 p-p) |
| TV Synch (Int) |
2 Div |
| TV Synch (Ext) |
0.5V p-p |
| Auto Triggering |
> 20Hz |
| External Trigger Input |
Impedance: 1MW ±5% + 20pF Capacitance
Maximum Input Voltage: 160V (DC or AC peak) |
| Z Axis Modulation |
| Sensitivity |
5V p-p |
| Maximum Input Voltage |
50V or AC p-p |
| Polarity |
Intensity increases as the voltage increases |
| Input Resistance |
10KW |
| Bandwidth (-3dB) |
DC to 1MHz |
| X-Y Mode |
| Inputs |
X-Axis (CH1), Y-Axis (CH2) |
| Sensitivity |
Same as CH1 |
| Accuracy |
±5% |
| Frequency Response (-3dB) |
DC: 0Hz to 1MHz
AC: 10Hz to 1MHz |
| Maximum Voltage |
Same as CH1 |
| X-Y Phase Difference |
< 3° from DC to 50KHz |
| Calibrator Signal |
| Waveform |
Square Wave |
| Amplitude |
0.5V ±3% p-p |
| Frequency |
1KHz ±2% |
| CRT |
| Size |
8cm x 10cm (3.15" x 3.94") |
| Acceleration Voltage |
2KV |
| General Specifications |
| Power Requirements |
AC Input Voltage: 120V or 220V |
| Frequency |
50/60Hz |
| Power Consumption |
40W |
| Operating Temperature |
0 to 40°C (32 to 104°F) |
| Size |
5.1" (H) x 12.5" (W) x 15.75" (D) |
| Weight |
16 lbs |
| Accessories |
Manual, Line cord, X1/X10 Probes (2) |
;)
