Protek 3290
2.9Ghz RF Signal Strength Analyzer

Click image to enlarge  Protek 3290 Datasheet Software

Features: Hand-Held and battery operated 100kHz to 2900MHz measurement range 125 Ch/sec scan rate Built-in 2.9GHz frequency counter High sensitivity (-117 dBm max) Detects Wide band and Narrow band FM, AM and Single Sideband Signals Phase lock loop for precise frequency tuning RS-232 interface Up to 160 channels may be scanned and displayed Audio output with built-in speaker Detachable antenna included Back-lit display All functions are menu selected Instrument setups & display data may be stored in memory Includes software and RS-232 Cable Hard copy printer output of spectrum and bar graph displays Ideal for IEEE 802.11 applications, Cellular Telephones, RF paging systems, Indoor repeaters, Surveillance applications Included Accessories: 6 - "AA" Batteries 1 - Instruction Manual 1 - Detachable 9" whip antenna 1 - RS-232 Cable 1 - Carrying case 1 - Earphone set 1 - Carrying Strap and Software 1 - Car Power Adapter 1 - AC/DC Converter

Model	Description	List Price	Sale Price
3290	2.9GHz Hand Held Field Analyzer - Discontinued - replaced by Protek 3290N
Model	Replacement Parts	List Price	Sale Price
CARADAPTOR	CAR ADAPTOR	$16.00	$13.76
AC ADAPTER	AC ADAPTER	$28.00	$24.08
BATTERYX6	NICAD BATTERY X 6	$30.00	$25.80

---

Screenshots: Counter Mode Display frequency and level of measured signal as a numeric value using the Counter Mode. Multi-Channel Mode 6 Types of Multi-Channel displays are available (4, 10, 20, 40, 80, 160CH). Difference Mode Scanning Marker channel, step frequency channel and level difference between the 2CH are displayed in bar-graph. Single-Channel Mode Signal level at the marker is displayed in bar-graph. BAR 160CH Scans and displays 160 channels as bar-graphs. 160, 80, 40, 20, 10 and 5CH available. BAR 5CH Shows 5 channels being displayed as bar-graphs.

Satellite TV

---

Tapping Detection

---

Other

Frequency
Frequency Range	100kHz to 2900MHz
Frequency Step	5kHz to 9995kHz in multiples of 5kHz or 6.25kHz
Ref. Oscillator Accuracy	±3 PPM
Frequency Marker Accuracy	±25 PPM
Frequency Measurements	Narrow Band FM, Wide Band FM, AM and Single side band
Input
Input Impedance	50W
Maximum Input Volts	5V RMS (+27dBm)
Measurement Units	dBmV, dBμV, dBm
Attenuation	0dB or -10dB internal; 0dB to 60dB with external Attenuator
Narrow Band FM
Level Measurement Range	-117dBm to -67dBm (300MHz to 1800MHz) -107dBm to -67dBm (1MHz to 300MHz and 1800MHz to 2900MHz)
Resolution	±0.5dB; Accuracy: ±3dB
Bandwidth	12.5kHz
Wide Band FM, AM, & SSB
Level Measurement Range	-107dBm to -57dBm (300MHz to 1800MHz) -97dBm to -57dBm (10MHz to 300MHz and 1800MHz to 2900MHz)
Resolution	±0.5dB
Accuracy	±3dB
Bandwidth	Wide band FM: Approx. 180kHz AM and SSB: Approx. 2.4kHz
BFO Frequency Range	±1.5kHz
Reception Sensitivity	0 to 6dBμV EMF with supplied antenna
Antenna Reception S/N Ratio	N-FM: 10 dB; W-FM: 12 dB
Display
Display Modes	Spectrum, Bar graph, Frequency counter
Spectrum Display	Displays 160 channels
Bar Graph Displays	Multi channel (2, 5, 10, 20, 40, 80, 160 bar graphs per display), Single Channel and 2 Channel difference
Sweep Modes	Single, Normal, Free run
Spurious Signals	(internally generated) -35dBc for W-FM -45dBc for N-FM (typical below full scale signal level)
Scan Mode
Mode	Manual, Channel (memory scan) and Search scan
Rate	125 Ch/s
Memory
Data Memory	Stores 10 displays of up to 160 CH per display
Setup Memory	Stores 10 setups for each scan mode
Frequency Counter
Bandwidth	9MHz to 2900MHz
Resolution	1kHz
Accuracy	50PPM ±1 count
Input Impedance	50W
Max Input Volts	5V RMS
Response Time	0.512 Sec.
Input Sensitivity	9MHz to 2060MHz: 120mV 20MHz to 1500MHz: 50mV 2MHz to 2800MHz: 500mV 2800MHz to 2900MHz: 750mV
Data Memory	Stores 10 Readings
Miscellaneous
LCD	192 x 192 Pixels, Light green
Back Light	LED. Back light will shut off 5 seconds after the last key depression
Interfaces	Std RS-232 interface with female 8 pin mini Din connector. Baud Rates of 1200, 2400, 4800 or 9600 BPS are menu selected. The software supplied is a Windows(r)-based program, which runs under Windows 95/98/ME/XP/2000.
Auto Power Off	5, 10, 20 or 30 minutes after the last key depression-user selected.
Audio Output	120mW into a 8W Speaker
Power Requirements	(6) AA NiCd or Alkaline Batteries, 12 volt car adapter or 11V to 16V 500 mA Max AC to DC adapter
General Specifications
Operating Temperature	0°C to 40°C
Relative Humidity	35% to 85%
Storage Temperature	-10 to 50°C
Size	9.5" H x 4.0" W x 1.8" D
Weight	1.4 lb
Supplied Accessories	Manual, (6) 1.5V AA NiCd Batteries, Detachable 9" whip antenna, RS-232 Cable, Carrying case, Earphone, Carrying strap and Software, Vehicle power adapter, AC/DC converter.

Protek Main Page

Protek RF Instruments

Protek Price List