company logo Protek 3201 Hand-Held 2GHz RF Signal Strength Analyzer
     Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.  
 
 
 



Protek 3201 Hand-Held 2GHz RF Signal Strength Analyzer



Click Image to Enlarge

Protek 3201

  • Hand-Held and battery operated
  • 100kHz to 2060MHz measurement range
  • Built-in 2GHz frequency counter
  • Detects Wide band and Narrow band FM, AM and Single Sideband Signals
  • Phase lock loop for precise frequency tuning
  • RS-232 interface
  • Up to 160 channels may be scanned and displayed
  • Audio output with built-in speaker
  • Detachable antenna included
  • Back-lit display
  • All functions are menu selected
  • Instrument setups & display data may be stored in memory
  • Includes software and RS-232 Cable
  • Hard copy printer output of spectrum and bar graph displays


Model Description List Price Sale Price
3201 2GHz Hand Held Field Analyzer - Discontinued - replaced by Protek 3201N

Frequency
Frequency Range 100kHz to 2060MHz
Frequency Step 5kHz to 9995kHz in multiples of 5kHz or 6.25kHz
Ref. Oscillator Accuracy ±3 PPM
Frequency Marker Accuracy ±25 PPM
Frequency Measurements Narrow Band FM, Wide Band FM, AM and Single side band
Input
Input Impedance 50W
Maximum Input Volts 5V RMS (+270dBm)
Measurement Units dBmV, dBµV, dBm
Attenuation 0dB or -10dB internal; 0dB to 60dB with external Attenuator
Narrow Band FM
Level Measurement Range -117dBm to -67dBm (1MHz to 2060MHz)
Resolution ±0.5dB; Accuracy: ±3dB
Bandwidth 12.5kHz
Wide Band FM, AM & SSB
Level Measurement Range -108dBm to -58dBm (10MHz to 2060MHz)
Resolution ±0.5dB
Accuracy ±3dB
Bandwidth Wide band FM: Approx. 180kHz
AM and SSB: Approx. 2.4kHz
BFO Frequency Range ±1.5kHz
Reception Sensitivity 0 to 6dBµV EMF with supplied antenna
Antenna Reception S/N Ratio N-FM: 10 dB; W-FM: 12 dB
Display
Display Modes Spectrum, Bar graph, Frequency counter
Spectrum Display Displays 160 channels
Bar Graph Displays Multi channel (2, 5, 10, 20, 40, 80, 160 bar graphs per display), Single Channel and 2 Channel difference
Sweep Modes Single, Normal, Free run
Spurious Signals (internally generated) -35dBc for W-FM
-45dBc for N-FM (typical below full scale signal level)
Scan Mode
Mode Manual, Channel (memory scan) and Search scan
Rate 12.5 Ch/s
Memory
Data Memory Stores 10 displays of up to 160 CH per display
Setup Memory Stores 10 setups for each scan mode
Frequency Counter
Bandwidth 9MHz to 2060MHz
Resolution 1kHz
Accuracy 50PPM ±1 count
Input Impedance 50W
Max Input Volts 5V RMS
Response Time 0.512 Sec.
Input Sensitivity 9MHz to 2060MHz: 120mV
20MHz to 1500MHz: 50mV
2MHz to 2060MHz: 500mV
Data Memory Stores 10 Readings
Miscellaneous
LCD 192 x 192 Pixels, Light green
Back Light LED. Back light will shut off 5 seconds after the last key depression
Interfaces Std RS-232 interface with female 8 pin mini Din connector. Baud Rates of 1200, 2400, 4800 or 9600 BPS are menu selected. The software supplied is a Windows(r)-based program, which runs under Windows 95/98/ME/XP/2000.
Auto Power Off 5, 10, 20 or 30 minutes after the last key depression-user selected.
Audio Output 120mW into a 8W Speaker
Power Requirements (6) AA NiCd or Alkaline Batteries, 12 volt car adapter or 11V to 16V 500 mA Max AC to DC adapter
Gereral Specifications
Operating Temperature 0°C to 40°C
Relative Humidity 35% to 85%
Storage Temperature -10 to 50°C
Size 9.5" H x 4.0" W x 1.8" D
Weight 1.4 lb.
Supplied Accessories Manual, (6) 1.5V AA NiCd Batteries, Detachable 9" whip antenna, RS-232 Cable, Carrying case, Earphone, Carrying strap and Software, Vehicle power adapter, AC/DC converter.




 

Welcome | Companies | Search by Type | How To Order | Leasing | About Us | Careers
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
BBBOnline Reliability Seal, Click for confirmation page. Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET
 



Live chat by BoldChat
Need help? We have a staff
of more than 30 people to help you.
Let us show you why over 100,000
customers choose Tequipment.NET