Click Image to Enlarge Protek 3003R

Remote Sensing for precise regulation Remote analog programming for both Constant Voltage and Constant Current modes Output load may be turned on or off by remote control Series & Parallel Master/Slave and Tracking operation Excellent Load, Line Regulation and Ripple Specs LED display for both current and voltage All inputs and outputs are isolated Fine and Coarse controls

Download Data Sheet

Ouput Characteristics

Output Volts 0 to ±30V Output Amps 0 to ±3A

Constant Voltage Mode

Load Regulation 5mV Line Regulation 5mV Noise and Ripple 0.5mV RMS

Constant Current Mode

Load Regulation 10mA Line Regulation 2mA Noise and Ripple 10mA RMS

Digital Display

Resolution Volts 100mV Amps 100mA Accuracy Volts ± (0.2% + 2D) Amps ± (1.0% + 3D)

Remote Programming

Voltage 0 to 10 volts applied to the remote voltage programming terminals will vary the output from 0 to the maximum voltage (or current in the constant current mode) ±5% Tolerance ±5% Resistance 0 to 10K resistance connected to the remote resistance programming terminals will vary the output from 0 to the maximum voltage (or current in the constant current mode) ±5% Master Slave Operation One master controls one or more slave units in series or parallel Note Parallel units must be the same model.

General Specifications

AC Input Volts 100V to 230V selectable Power Consumption 235VA Operating Temp 0 to 40°C (32 to 104°F) Size 5.8" H x 5.3" W x 12.7" D Weight 22 lbs. Supplied Accessories Manual, Power cord, Leads