• Set of three color-coded test leads, 25, 50, 100 ft. (8, 15, 30 m)
• Two 20-in.(51 cm) ground rods
• Canvas accessory case for leads and rods only

The 250579 standard optional accessory kit for the 250202, 250302, DET5/4R, DET5/4D & DET62D tester family.

• Set of three color-coded test leads, 25, 50, 100 ft. (8, 15, 30 m)
• Two 20-in.(51 cm) ground rods
• Padded case to hold instrument, leads and rods

The 250581 deluxe optional accessory kit for the 250202, DET5/4R, DET5/4D & DET62D tester family.

• Set of four test leads, 50 ft.(15 m)
• Two 20-in.(51 cm) ground rods
• Padded case to hold instrument, leads and rods

The 250586 soil resistivity kit for the 250202, 250302, DET5/4R & DET5/4D tester family.

• Hammer, 2.5 lb (1.13 kg)
• Four galvanized steel spikes, 0.5 in. (12 mm)
• Two spike extractors
• Four leads in carrying case

The Super-Deluxe Kit for the 250202, DET5/4R, DET5/4D & DET62D tester family.

• Use one hand to connect to test switch
• Locate connector to corresponding switch
• 4-Way Connectors

The NEW STATES® 10 and 14 pole potential test paddles are feature packed and have been designed to make a test technician’s job easier.

FTPKIT STATES Test Lead Kit
This KIT comes with a FTP10 10 Pole Test Paddle, and also comes equipped with many other accessories / parts.

This kit can be used with:

• ABB FT-1
• FMS 10 Pole
• Westinghouse Mechanical Relays

STATES Crocodile Clips
This small clip has slender, strong jaws with teeth that mesh along the entire length as well as on the front end. It can be insulated with only jaws exposed. Vinyl insulators are standard, either red or black.

STATES Potential Clips
This handy clip is especially suited to connecting potential leads to potential screws in 3-wire meter terminal chambers. Vinyl insulators are provided, either black or red.

STATES Test Clips
STATES test clips are valuable timesavers in any electrical work requiring quick, temporary connections. Strong jaws bite through corrosion to ensure a good connection. Vinyl insulators are provided, either black or red.

STATES Test Plugs
Used in connection with the current shunt jack on STATES test switches, this plug provides a safe, quick connection for indicating or testing instruments without opening current transformer secondaries or disturbing permanent wiring. The plug is easily inserted at right angles to the test block.

STATES Straight Plugs
STATES solder-type plugs are designed to maintain proper tension for good electrical contact when used with the STATES plug receptacles.

STATES Plug Receptacles
STATES Plug receptacles are used with STATES straight plugs.

STATES Phenolic Head Binding Posts
The body is a bolt with internal and external thread and can be fastened securely to the switchboard or other base by one hex nut. The binding head and stud collar are made of molded phenolic. The head screws into the body with a long thread that makes a good contact and prevents the tendency of the head to fall off and become lost. All metal parts are brass.

STATES Jumper Strips
This nickel-plated jumper strip is made specially for the STATES Type NT & ZWM Terminal Blocks and the STATES Type MTS Test Switches.

STATES Insulated Socket Wrench
This compact, lightweight, 7 inch wrench with insulation to the socket head has a hollow shank that extends 2½ inches over a 3/16 inch stud and 1 7/8 inches over a 5/16 inch stud. It is designed for use as a ½ inch socket wrench or as the handle for the screwdriver and socket adapters.

STATES Interchangeable Right-Angle Pin Terminals
Ideal for making connections in tight places. States pin terminals can be screwed into the side or end of the insulated handle, simply by removing the setscrew. The handle can be purchased separately, or in combination with any of four different terminals.