| Model |
Description or Specification |
 |
MLS1000-Multimode
Light Source
The MLS1000 is a stable optical dual LED source that can be used
in conjunction with an optical power meter for optical loss testing
of fibre optic cables. It has been precalibrated to output 850 nm
or 1300 nm respectively for an output level of -20 dBm into a 62.5/125
multi-mode fibre. It is particularly suitable for the testing of
LAN's, FDDI, and other mutli-mode links whether inside or outside
a building. |
 |
MLS2000-Single
Mode Stablised Laser Source
The MLS2000 is a stable optical dual laser source that can be used
in conjunction with an optical power meter for optical loss testing
of fibre optic cables. It has been precalibrated to output 1310
nm or 1550 nm respectively for an output level of –6 dBm into
a 9/125 single-mode fibre. It is particularly suitable for the testing
of SDH, CATV, telecom and other single mode links. |
 |
MLS635-Visible
Light Source
The MLS635 is a hand-held, stable, visible light source that can
be used to visually test optical fibre cables, splices and connectors
on both multi- and single- mode systems. Any sharp bends and breaks
in jacketed or bare fibres, or poorly mated connectors, will allow
the generated visible light to escape making the MLS635 ideal for
identifying faults in fibre optic jumper cables, distribution frames,
patch panels and splice trays. |
 |
MPM1000-Multi-Mode
Power Meter
The MPM1000 is an accurate optical power meter that can be used
for optical loss testing of fiber optic cables. It has been precalibrated
for absolute power levels with reference to 1 mW (dBm) for 850 nm,
1300 nm and 1550 nm laser frequencies using multi-mode cables. However,
it can also be used in relative power mode and, therefore, can also
be used on single-mode cables. The MPM1000 is accurate to ±5%
at -23 dBm (±0.22 dBs) and has a wide dynamic range of +5
dBm to -60 dBm with a resolution of 0.1 dBm. It is particularly
suitable for the testing of LANs, FDDI, and other multi-mode links
whether inside or outside a building. |
 |
MPM2000-Single
Mode Power Meter
The MPM2000 is an advanced optical power metes that can be used
for optical loss testing of fibre optic cables. It has been precalibrated
for absolute power levels with reference to 1 mW (dBm) for 1310
nm and 1550 nm laser frequencies using single mode cables. However,
the MPM2000 can also be used in relative power mode and can therefore
also be used on multi-mode cables. |
|
|
MPM2000H-Single
Mode Power Meter
The MPM2000H is an advanced optical power metes that can be used
for optical loss testing of fibre optic cables. It has been precalibrated
for absolute power levels with reference to 1 mW (dBm) for 1310
nm and 1550 nm laser frequencies using single mode cables. However,
the MPM2000H can also be used in relative power mode and can therefore
also be used on multi-mode cables. |
;)
