My Account

Log in to Your Account

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

(877) 571-7901

Sales@TEquipment.NET

()

Shop By Category
Top Categories
Clamp Meters
Datacom and Networking Products
Dataloggers Data Acquisition
Signal Generators / Counters
Ground Testers
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter / Insulation Resistance Testers
Microscopes
Multimeters
Oscilloscopes
Power Measurement
Power Supplies
Process / Calibration
RF, Microwave, EMI
Safety Testing / Surge Testing
Soldering Equipment
Thermal Imagers
Shop All Categories
Enjoy BIG savings on Thermo Scientific water baths, ovens, incubators and more for a limited time.SHOP NOW

Diagnose potential faults in industrial, electrical, and mechanical systems with advanced features like 1-Touch Level/Span and continuous laser-assisted autofocus, making them the perfect non-contact diagnostic tools for condition monitoring.SHOP NOW

Low cost, simple to use, one-, two- (split-phase) and three-phase (Y, Δ) power/energy data logger. All vital energy data is easily measured, recorded, analyzed with minimal configuration time and effort.SHOP NOW
Brands
- Rigol
- Megger
- Hioki
- Hakko
- Mastercool
Promotions
Clearance

Member Price INACTIVE
Create a FREE Account to Unlock Your Savings
Member Price ACTIVE

Martel PTC-8010 RTD and Thermocouple Calibrator 1920000

Name: Martel PTC-8010 RTD and Thermocouple Calibrator 1920000
Brand: Martel
SKU: MartelPTC-8010
Price: 1382.05 USD
Availability: InStock
Rating: 4.00 (2 reviews)

4 (2 Reviews) | Catalog: 1920000 | Model: Martel PTC-8010

Compare

PTC-8010 Multifunction RTD and T/C Temperature Calibrator

Simple, straight forward, Intuitive user interface
Easy to learn yet powerful 3 Key Martel Menu System
New ClearBrite™ Graphic Display
New streamlined case design
Calibrate thermocouples and RTDs with one unit
Works with Rosemount 3144 and all other smart transmitters
Direct keyboard entry or scroll control of output
User-defined setpoints
High accuracy ±0.4°C J thermocouple and ±0.3 °C PT 100-385 RTDs; all errors included
Thirteen (13) thermocouple types and thirteen (13) RTD types including PT 385 (1,000 Ohm) and Cu (10 Ohm)
NEMA 4 rated case, rugged design
RTD simulation works with all pulsed (smart) transmitters
YSI 400 series thermistor range for medical applications
Standard mini-plug connections for T/C
Standard banana jack connections for RTDs
Store setpoints for each output function
RS232 interface
Supplied in full rubber boot; optional carrying case available
Compare with other leading Manufacturers
Includes NIST Certificate with calibration data

View Product Details

List Price: $1,599.99

In Stock:

View Payment Options

Recommended for you

Description

RTD and Thermocouple Calibrator

This RTD and Thermocouple Calibrator is an ideal device to handle all of your temperature calibration needs in a truly rugged, low-cost package. It combines virtually all widely used thermocouples and RTDs in one device - you'll never have to worry about finding a temperature device you can't calibrate. This is especially true when calibrating "smart" or pulsed RTD transmitters, where many other rtd calibrators fail to work or operate at reduced accuracy specs.

In The Box

Manuals/Guides

Manufacturer Specs


Model	DMC-1410	MC-1210	MC-1010	PTC-8010	PSC-4010
All specifications apply at 23°C ± 5°C. unless otherwise stated. Outside of this range add ± 0.005%of reading/°C. Specifications for battery operation only.
General
Operating Temperature	-10°C to 50°
Storage Temperature	-20°C to 70°
Power	4 X AA batteries; Alkaline or optiona rechargeable
Low battery warning	Yes
Serial Communications	Yes, ASCII, RS-232, requires 1919069 cable or equivalent, USB adapter available
CE - EMC	EN50082-1: 1992 and EN55022: 1994 Class B
Safety	CSA C22.2 No. 1010.1: 1992

Model	DMC-1410	MC-1210	MC-1010	PSC-4010
DC Voltage Measurement/Source
Measurement: Isolated (UpperDisplay)	Range : 0.000V- 30.000V
	Accuracy (% of reading ± floor) : 0.015% ± 2mV
Measurement: non-Isolated (LowerDisplay)	Range : 0.000V - 20.000V
	Accuracy (% of reading ± floor) : 0.015% ± 2mV
Source	Range : 0.000V - 20.000V
	Accuracy (% of reading ± floor) : 0.015% ± 2mV
Maximum current output in voltage ranges is 1mA with an output impedance of = 1 . † for DMC-1410, MC-1210 only.
DC Current Measurement/Source
Measurement: Isolated (UpperDisplay)	Range : 0.000mA - 24.000mA
	Accuracy (% of reading ± floor) : 0.015% ± 2mA
Measurement: non-Isolated (LowerDisplay)	Range : 0.000mA - 24.000mA
	Accuracy (% of reading ± floor) : 0.015% ± 2mA
Source	Range : 0.000mA - 24.000mA
	Accuracy (% of reading ± floor) : 0.015% ± 2mA
Maximum load on mA source is 1000Ω. Voltage input range on simulate mode 5V - 30V. † for DMC-1410, MC-1210 only.
Frequency Measurement/Source
Measurement	Range2.0CPM - 600.0CPM 1.0Hz - 1000.0Hz 1.00KHz - 10.00KHz
	Accuracy (% of reading ± floor) :0.05% ± 0.1CPM 0.05% ± 0.1Hz 0.05% ± 0.01KHz
Source	Range2.0CPM - 600.0CPM 1.0Hz - 1000.0Hz 1.00KHz - 10.00KHz
	Accuracy (% of reading ± floor) :0.05% 0.05% 0.125%
Input voltage amplitude range on frequency is 1V to 20V zero based square wave only. Output amplitude is adjustable from 1V to 20V, and is a square wave with 50% duty cycle. For output frequency, a negative offset of approximately -0.1V is present to assure zero crossing.

Model	DMC-1410	MC-1210	MC-1010	PTC-8010
Resistance Measurement
Ohms low
Range : 0.00Ω - 400.0Ω
Accuracy (% of reading ± floor) : 0.025% ± 0.05Ω
Ohms high
Range : 401.0Ω - 4000.0Ω
Accuracy (% of reading ± floor) : 0.025% ± 0.5Ω
Resistance Measurement
Ohms low
Range : 5.0Ω - 400.0Ω 5.0Ω - 400.0Ω
Excitation Current : 0.1mA - 0.5mA 0.5mA - 3mA
Accuracy (% of reading ± floor) : 0.025% ± 0.1Ω 0.025% ± 0.05Ω
Ohms high
Range : 400Ω - 1500Ω 1500Ω - 4000Ω
Excitation Current : 0.05mA - 0.8mA 0.05mA - 0.4mA
Accuracy (% of reading ± floor) : 0.025% ± 0.5Ω 0.025% ± 0.5Ω
Note: Units are compatible with smart transmitters and PLCs that use a strobing excitation current. Frequency response is = 5ms.
RTD Measurement/Source
RTD Type	Range (°C)		Accuracy (°C)
Ni120 (672)	-80.0 - 260.0		0.2
Cu10	-100.0 - 260.0		1.4
Cu50	-180.0 - 200.0		0.4
Cu100	-180.0 - 200.0		0.3
YSI400	15.00 - 50.00		0.1
Pt100 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 600.0 600.0 - 800.0		0.2 0.3 0.4 0.5
Pt200 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 630.0		0.8 0.9 1.0
Pt500 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 630.0		0.4 0.5 0.6
Pt1000 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 630.0		0.2 0.3 0.4
Pt10 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 600.0 600.0 - 800.0		1.4 1.6 1.8 2.0
Pt50 (385)	-200.0 - 100.0 100.0 - 300.0 300.0 - 600.0 600.0 - 800.0		0.4 0.5 0.6 0.7
Pt100 (3926)	-200.0 - 100.0 100.0 - 300.0 300.0 - 630.0		0.2 0.3 0.4
Pt100 (3916)	-200.0 - 100.0 100.0 - 300.0 300.0 - 630.0		0.2 0.3 0.4
Thermocouple Measurement/Source
TC Type	Range (°C)		Accuracy (°C)
J	-210.0 - 0.0 0.0 - 800.0 800.0 - 1200.0		0.4 0.2 0.3
K	-200.0 - 0.0 0.0 - 1000.0 1000.0 - 1372.0		0.6 0.3 0.5
T	-250.0 - 0.0 0.0 - 400.0		0.6 0.2
E	-250.0 - -100.0 -100.0 - 1000.0		0.6 0.2
R	0.0 - 1767.0		1.2
S	0.0 - 1767.0		1.2
B	600.0 - 800.0 800.0 - 1000.0 1000.0 - 1820.0		1.2 1.3 1.5
C	0.0 - 1000.0 1000.0 - 2316.0		0.6 2.3
XK	-200.0 - 800.0		0.2
BP	0.0 - 800.0 800.0 - 2500.0		0.9 2.3
L	-200.0 - 0.0 0.0 - 900.0		0.25 0.2
U	-200.0 - 0.0 0.0 - 600.0		0.0 - 600.0 0.25
N	-200.0 - 0.0 0.0 - 1300.0		0.8 0.4
*(In °C; add 0.2 for Cold Junction Compensation error)

Tech Specs

Process / Calibration/Multifunction Calibrators Template
Type	Hand Held
Test Equipment General Attributes
Product Height	3.25 IN
Product Length	9.75 IN
Product Width	7.50 IN
HTS/Schedule B Number	9030.39.0100
ECCN Number	EAR99
Country of Origin	China
Shipping Height	3.25 IN
Shipping Length	9.75 IN
Shipping Width	7.50 IN

PTC-8010 Product Reviews

4

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review

Displaying all 2 reviews

Most Helpful First | Newest First

Purchasing

3.0

Does not meet expectations of the older model which was initially bought to replace.

Sharmila on Dec 24, 2018 I found this helpful (0)

Recommend to a Friend

Exceeded expectations

5.0

This was a replacement for an existing unit. Works great, was shipped earlier than originally estimated, and received free bore scope as well.

Verified Purchase Chris Koch on Dec 29, 2014 I found this helpful (0)

Compare

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Martel PTC-8010 RTD and Thermocouple Calibrator 1920000

Recommended for you

Description

In The Box

Manuals/Guides

Manufacturer Specs

Tech Specs

Process / Calibration/Multifunction Calibrators Template

Test Equipment General Attributes

PTC-8010 Product Reviews

4

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company