Martel Electronics Beta MC-1200 A precision dual display Multi-Function Calibrator Beta Calibrators MartelElectronics MC-1200 MC1200 MC 1200

SalesTeam@TEquipment.NET

Call Us 1-877-571-7901

Martel Electronics Beta MC-1200 A precision dual display Multi-Function Calibrator

Martel Electronics Beta MC-1200 A precision dual display Multi-Function Calibrator

Click image to enlarge

Martel MC-1200

Process Calibration Flash Demo

Multifunction Calibrator DataSheet

Calibrator Quick Start Guide

Martel BETA MC-1200 versus Fluke Model 725 (.xls)

Features:

Measure and source T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency; source pulse trains
Isolated mA/V read-back circuit for complete transmitter calibration
Communication port compatibile with both Fluke 700 Series and Beta Calibrator pressure modules
Built-in 24V supply can drive 4-20 mA lops up to 1000 Ohms
Direct entry of custom RTD coefficients (Ro, A, B, C)
All source modes can be programmed with dedicated setpoints to speed calibration and linearity tests
Highest accuracy in class to 0.015% of reading
Meets CE requirements and is designed to IEC 1010 safety standards
Supplied in full rubber boot; optional carrying case available

Description

This multifunction calibrator provides a feature set unmatched in high accuracy, hand-held calibrators in its price range. The mc-1200 multifunction calibrator provides the functions and accuracy associated with fixed-installation, laboratory instrument, and has everything needed for virtually any calibration tasks. Measure and source thermocouples, RTDs, current, voltage, and frequency, and source pulse trains. A communications port compatible with both Fluke® 700 Series and Beta Calibrators pressure modules is provided, as is an isolated mA/V read-back circuit. Arrow keys, direct numeric keypad entry, and three software driven function buttons, plus a large backlit, menu-driven graphics display combine to provide a highly intuitive, simple yet powerful operator interface. Built-in 250 Ohm resistor for HART™ compatibility, compatibility with smart transmitters and PLCs, full fuseless protection, are just some of the additional features that make the process calibrator the single most indispensible tool available for virtually any calibration task. This multifunction calibrator is supplied in a tough, rubber boot; a carrying case is also available as an option.

Models, Options, & Accessories

Model	Description	List Price	Sale Price
MC-1200	MC-1200 Dual display multi-function calibrator - Discontinued - replaced by Martel MC-1210
MC-1000	MC-1000 Multi-function calibrator - Discontinued - replaced by Martel MC-1010
MasterCAL 990	Universal Documenting HART Calibrator 910990-001 - Discontinued - no replacement

Specifications

MC-1200 Specifications (23 °C ±5 °C unless otherwise noted)
Voltage Read and Source
Source	0.000 to 20.000 VDC
Read
Isolated	0.000 to 30.000 VDC
Non-Isolated	0.000 to 20.000 VDC
Thermocouple mV
Read/Source	10.000 to +75.000 mV
Current(mA)
Source	0.000 to 24.000 mA
Read
Isolated	0.000 to 24.000 mA
Non-Isolated	0.000 to 24.000 mA
Frequency (1 to 20 V selectable amplitude)
CPM Source and Read	2.0 to 600.0 CPM
Hz Source and Read	1.0 to 1000.0 Hz
kHz Source and Read	1.0 to 10.00 kHz
Pulse (Source only; 1 to 20 V selectable amplitude)
Pulses	1 to 30,000.0 2 CPM to 10 kHz
Ohms
Source	5.0 to 4000 Ohms
Read	0.00 to 4000.0 Ohms
Thermocouple Read and Source
J Thermocouple	200.0 to +1200.0 °C
K Thermocouple	200.0 to +1370.0 °C
T Thermocouple	200.0 to +400.0 °C
E Thermocouple	200.0 to +950.0 °C
R Thermocouple	20.0 to +1750.0 °C
S Thermocouple	20.0 to +1750.0 °C
B Thermocouple	+600.0 to +1800.0 °C
C Thermocouple	0 to +2316.0 °C
XK Thermocouple	200.0 to +800.0 °C
BP Thermocouple	0 to +2500.0 °C
L Thermocouple	200.0 to +900.0 °C
U Thermocouple	200.0 to +400.0 °C
N Thermocouple	200.0 to +1300.0 °C
RTD Read and Source
Ni120 (672)	80.0 to +260.0 °C
Pt100 (385)	200.0 to +800.0 °C
Pt100 (3926)	200.0 to +630.0 °C
Pt100 (3916)	200.0 to +630.0 °C
Pt200 (385)	200.0 to +630.0 °C
Pt500 (385)	200.0 to +630.0 °C
Pt1000 (385)	200.0 to +630.0 °C
Cu10	100.0 to +260.0 °C
YSI400	+15.00 to +50.00 °C
Cu50	180.0 to +200.0 °C
Cu100	180.0 to +200.0 °C
Pt385	10 -200.0 to +800.0 °C
Pt385	50 -200.0 to +800.0 °C
Environmental
Operating Temperature	10 °C to +50 °C
Storage Temperature	20 °C to +70 °C
Stability	±0.005% of reading/°C outside of 23 °C ± 5°C
Power Requirements	6 VDC
Batteries	4 AA; alkaline or optional rechargeable
Mechanical
Dimensions	8.7” H x 4.2” W x 2.3” D (220.9 x 106.6 x 58.4 mm)
Weight	30.5 ounces (863 gms)
Accessories Included	Test leads, 4 AA alkaline batteries, NIST Certificate, instruction manual
Optional Accessories	Carrying Case, Model CC572
Accuracy
Voltage	±0.015% of reading, ±2 mV
Thermocouple mV	±0.02% of reading, ±10 µV
Thermocouple Errors(in °C; add 0.2 for Cold Junction Compensation error)
Type J	0.2 °C
Type K	0.3 °C
Type T	0.2 °C
Type E	0.2 °C
Type R	1.2 °C
Type S	1.2 °C
Type B	1.2 °C
Type C	0.6 °C
Type XK	0.2 °C
Type BP	0.9 °C
Type L	0.2 °C
Type U	0.25 °C
Type N	0.4 °C
RDT Read and Source
Ni120 (672)	0.2 °C
Pt100 (385)	0.2 °C
Pt100 (3926)	0.2 °C
Pt100 (3916)	0.2 °C
Pt200 (385)	0.8 °C
Pt500 (385)	0.4 °C
Pt1000 (385)	0.2 °C
Cu10	1.4 °C
YSI400	0.1 °C
Cu50	0.4 °C
Pt385-10	1.4 °C
Pt385-50	0.4 °C
Read
Current (mA)	±0.015% of reading, ±2 µA
CPM	±0.05% of reading, ±1 LSD
Hz	±0.05% of reading, ±1 LSD
kHz	±0.05% of reading, ±1 LSD
Ohms	works with all pulsed transmitters down to 5 ms
400 Ohm Range	±0.025% of reading, ±0.05Ω
4000 Ohm Range	±0.025% of reading, ±0.5Ω
Source
Current (mA)	±0.015% of reading, ±2 µA
CPM	±0.05% of reading
Hz	±0.05% of reading
kHz	±0.05% of reading
Ohms	works with all pulsed transmitters down to 5 ms
400 Ohm Range	±0.025% of reading, ±0.05Ω
4000 Ohm Range	±0.025% of reading, ±0.5Ω

Martel
Main Page

Martel
Multifunction Calibrators

Martel
Price List

Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740

BBBOnline Reliability Seal, Click for confirmation page.

Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET