|
Martel Electronics MC-1000
High Accuracy Multi-Function Process Calibrator
Click image to enlarge
Martel MC-1000
|
|
Features:
- ±0.4°C thermocouple/±0.3°C RTD accuracy
- Ten (10) T/C types and eight (8) RTD types, plus YSI 400
- ±0.4°C thermocouple/±0.3°C RTD accuracy
- Read and source modes
- Full Function 4 to 20 mA read, source, simulate and read/power modes with ±0.015% of reading accuracy
- Source or read 0 to 20 volts (±0.015% of reading accuracy)
- Measure 0 to 250 VDC or VAC
- RTD function compatible with all pulsed transmitters
- Store up to nine (9) setpoints for each output function
- Direct keyboard entry enables quick output changes
- RS232 serial interface
- Supplied in full rubber boot; optional carrying case available
|
Description
|
This process calibrator provides the combination of a high accuracy calibrator and common DMM functions. This single calibration instrument will calibrate virtually any process device including: read and source thermocouples, RTDs, Ohms, Voltage, Current, Frequency, Pressure, and test continuity. By adding a connector or adapter to the process calibrator makes it compatible with 29 different Fluke® 700 Series and Beta Calibrator pressure modules. The process calibrator features a simple user interface, large display, and an RS232 serial interface.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| MC-1000 |
MC-1000 Multi-function calibrator |
$1360.00 |
| $1278.40 |  |
|
| MC-1200 |
MC-1200 Dual display multi-function calibrator |
$1895.00 |
| $1781.30 | |
|
| MasterCAL 990 |
Universal Documenting HART Calibrator 910990-001 |
$6495.00 |
| $6105.30 | |
|
Specifications
| Pressure Ranges |
Various ranges in 29 different pressure modules |
| T/C Ranges |
J, K, T, E, R, S, N, B, L, U,
including – 10 to 75 mV |
| RTD Ranges |
Pt 385 (100, 200, 500, 1000 Ohms) Pt 392, JIS, Ni120, Cu10, YSI400 |
| Ohms Ranges |
0 to 400.00 and 400 to 3,200 |
| mA Range |
0 to 24.000 mA |
| Voltage |
| (Low) |
Read 0-20.000 VDC |
| Source |
0-20.000 VDC |
| (High) |
Read only 0-250 VDC or VAC |
| Frequency |
0.000 to 24.000 mA |
| CPM Source |
2.0 - 1,000.0 |
| CPM Measure |
0.0 - 1,000.0 |
| Hz Source |
0 - 1,000 |
| Hz Measure |
0.0 - 1,000.0 |
| kHz Source |
1.0 -10.0 |
| kHz Measure |
0.00 -10.00 |
| Continuity |
0 to 400.0 Ohms;
audible tone when under 10 Ohms |
| Accuracy |
[±x.x °C total error] |
| T/C Type J |
±0.3 °C ±10 µV; [±0.4 °C] |
| RTD Pt 100 |
±0.1 °C ±0.075 O ; [±0.3 °C] |
| Ohms (400) |
±0.1 O |
| Ohms (3,200) |
±1.0 O |
| mA Compliance |
Up to 1,000 O load |
| Voltage Drive Capability |
1 mA |
| RTD IEX-Range |
0.01 mA to 3 mA |
| RTD Frequency Response |
10 ms – works with all pulsed transmitters |
| Environmental |
| Operating Temperature |
-10 °C to +50 °C |
| Storage Temperature |
-20 °C to 70 °C |
| Power Requirements |
6 VDC |
| Batteries |
4 AA alkaline batteries,
25 hours typical operating time |
| Mechanical |
| Dimensions |
8.7” H x 4.2” W x 2.3” D
(220.9 x 106.6 x 58.4 mm) |
| Weight |
30.5 ounces (863 gms) |
| Accessories Included |
Test leads, 4 AA alkaline batteries, NIST Certifi cate, and instruction manual |
| Optional Accessories |
Carrying Case; Model CC572 |
|
;)
