|
Mark-10
Series EG Advanced Force Gauges
Click image to enlarge
Mark-10 EG012
|
|
Features:
- Compatible with all Mark-10 test stands and grips
- Selectable units of measurement
- Programmable default configuration
- Peak memory for tensile and compressive forces
- Push-button calibration
- Battery or AC operation
- Programmable automatic shutoff
- Permanent configuration memory
- Optional RS-232, Mitutoyo and analog outputs
- Reversible aluminum housing for handheld use or test stand mounting (see below)
- Same housing size for all capacities
- Accuracy: ± 0.3% of full scale ±1 digit
- Sampling rate: 30 readings/sec
- Safe overload: 150% of capacity
- Battery life: 8-10 hours per charge
- Weight: 0.9 lbs (0.4 kg)
- Environmental requirements: 40°F - 100°F [5°C - 45°C], < 96% humidity (non-condensating)
- Warranty: 3 years
- CE mark
|
Description
The Series EG is an ideal solution for compression and tension applications requiring accuracy and flexibility in the entire 0.12 lb to 500 lb range. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.
Reversible Housing - A Mark-10 exclusive
All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Series BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.
Click on the image below to enlarge.
Optional equipment
- A wide range of test stands and gripping fixtures
- Outputs package - RS-232, Mitutoyo, and analog outputs. Available at time of purchase or as an upgrade.
- Overload protection module - Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands.
- Output cable - Send test data to a PC, statistical printer, or other data collector for further analysis.
The EG is compatible with all Mark-10 force measurement test stands. It is shown here in a compression testing application, mounted to an ES30 with optional items: digital travel display and extension rod.
Series EG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, hook, flat, user's manual, and NIST-traceable certificate of calibration.
|
Dimensions
| Model |
ŘA |
B |
C |
Thread |
| EG012-EG200 |
0.200 [5.8] |
0.19 [4.8] |
0.35 [8.9] |
#10-32 |
| EG500 |
0.312 [7.9] |
0.44 [11.2] |
0.60 [15.2] |
5/16/2018 |
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| EG012 |
Force gauge, 0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V |
$795.00 |
| $755.25 |  |
|
| EG012E |
Force gauge, 0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 220V |
$795.00 |
| $731.40 | |
|
| EG025 |
Force gauge, 0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 110V |
$795.00 |
| $755.25 | |
|
| EG025E |
Force gauge, 0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 220V |
$795.00 |
| $731.40 | |
|
| EG05 |
Force gauge, 0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 110V |
$795.00 |
| $755.25 | |
|
| EG05E |
Force gauge, 0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 220V |
$795.00 |
| $731.40 | |
|
| EG2 |
Force gauge, 2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 110V |
$695.00 |
| $660.25 | |
|
| EG2E |
Force gauge, 2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 220V |
$695.00 |
| $639.40 | |
|
| EG5 |
Force gauge, 5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 110V |
$695.00 |
| $660.25 | |
|
| EG5E |
Force gauge, 5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 220V |
$695.00 |
| $639.40 | |
|
| EG10 |
Force gauge, 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V |
$695.00 |
| $660.25 | |
|
| EG10E |
Force gauge, 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 220V |
$695.00 |
| $639.40 | |
|
| EG20 |
Force gauge, 20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 110V |
$695.00 |
| $660.25 | |
|
| EG20E |
Force gauge, 20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 220V |
$695.00 |
| $639.40 | |
|
| EG50 |
Force gauge, 50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 110V |
$695.00 |
| $660.25 | |
|
| EG50E |
Force gauge, 50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 220V |
$695.00 |
| $639.40 | |
|
| EG100 |
Force gauge, 100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N, 110V |
$695.00 |
| $660.25 | |
|
| EG100E |
Force gauge, 100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N, 220V |
$695.00 |
| $639.40 | |
|
| EG200 |
Force gauge, 200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 110V |
$795.00 |
| $755.25 | |
|
| EG200E |
Force gauge, 200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 220V |
$795.00 |
| $731.40 | |
|
| EG500 |
Force gauge, 500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 110V |
$795.00 |
| $755.25 | |
|
| EG500E |
Force gauge, 500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 220V |
$795.00 |
| $731.40 | |
|
| Model |
Options |
List Price |
Sale Price |
| EGRS |
Output option for EG (RS-232, Mitutoyo, analog) as a retrofit |
$200.00 |
| $190.00 | |
|
| 09-1047 |
Cable, gauge to Mitutoyo SPC |
$75.00 |
| $71.25 | |
|
| 09-1048 |
Cable, BG/EG/BGI to RS-232, 25-pin |
$60.00 |
| $55.20 | |
|
| 09-1048A |
Cable, serial, gauge to PC |
$75.00 |
| $71.25 | |
|
| 11-1042 |
Overload protection module, gauge to test stand |
$195.00 |
| $185.25 | |
|
Specifications
| Model |
Capacity x resolution |
| EG012 |
0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V |
| EG025 |
0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 110V |
| EG05 |
0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 110V |
| EG2 |
2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 110V |
| EG5 |
5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 110V |
| EG10 |
10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V |
| EG20 |
20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 110V |
| EG50 |
50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 110V |
| EG100 |
100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N, 110V |
| EG200 |
200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 110V |
| EG500 |
500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 110V |
| For 220V operation add suffix E to model number. Example: EG50E |
|
;)
;)
;)
;)