|
Mark-10
Series BG Premium Force Gauges
Click image to enlarge
Mark-10 BG012
|
|
Features:
- Compatible with all Mark-10 test stands and grips.
- RS-232, Mitutoyo and analog outputs
- GCL-Gauge Control Language for full computer control
- Automatic timed output on RS-232
- Dual set points with outputs
- Averaging mode for average readings over time
- External trigger for contact or switch testing and data capture
- General purpose I/O for external device control
- Programmable analog and digital filters
- Selectable units of measurement
- Programmable default configuration
- Peak memory for tensile and compressive forces
- Push-button calibration
- Battery or AC operation
- Programmable automatic shutoff
- Reversible aluminum housing for handheld use or test stand mounting (see below)
- Same housing size for all capacities
- Accuracy: ± 0.2% of full scale ±1 digit
- Sampling rate: 65 readings/sec
- Safe overload: 150% of capacity
- Battery life: 8-10 hours per charge
- Weight: 0.9 lbs (0.4 kg)
- Environmental requirements: 40°F - 100°F [5°C - 45°C], < 96% humidity (non-condensating)
- Warranty: 3 years
- CE mark
|
Description
The Series BG Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.
Reversible Housing - A Mark-10 exclusive
All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Series BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.
Click on the image below to enlarge.
Optional Equipment (for use with all Sensors)
- A wide range of test stands and gripping fixtures
- Hi / lo limits indicator - Set limit conditions for a test - the indicator will display red lights for high and low limits, and a green light to indicate passing.
- Overload protection module - Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands.
- Set point cable - Stops test stand travel at programmable high and low set points for tension and compression forces. For use with Mark-10 motorized test stands.
- Output cable - Send test data to a PC, statistical printer, or other data collector for further analysis.
The BG is compatible with all Mark-10 force measurement test stands. It is shown here in a tensile testing application, mounted to an ESM motorized test stand with optional items: digital travel display, limit switches, and wedge grips.
Series BG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, chisel, cone, v-groove, hook, flat, extension rod, user's manual, and NIST-traceable certificate of calibration.
|
Dimensions
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| BG012 |
Force gauge, 0.12 x 0.00005 lb, 50 x 0.02 gF, 0.5 x 0.0002 N, 110V |
$1145.00 |
| $1087.75 |  |
|
| BG012E |
Force gauge, 0.12 x 0.00005 lb, 50 x 0.02 gF, 0.5 x 0.0002 N, 220V |
$1145.00 |
| $1053.40 | |
|
| BG025 |
Force gauge, 0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N, 110V |
$1145.00 |
| $1087.75 | |
|
| BG025E |
Force gauge, 0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N, 220V |
$1145.00 |
| $1053.40 | |
|
| BG05 |
Force gauge, 0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N, 110V |
$1145.00 |
| $1087.75 | |
|
| BG05E |
Force gauge, 0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N, 220V |
$1145.00 |
| $1053.40 | |
|
| BG2 |
Force gauge, 2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N, 110V |
$995.00 |
| $945.25 | |
|
| BG2E |
Force gauge, 2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N, 220V |
$995.00 |
| $915.40 | |
|
| BG5 |
Force gauge, 5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N, 110V |
$995.00 |
| $945.25 | |
|
| BG5E |
Force gauge, 5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N, 220V |
$995.00 |
| $915.40 | |
|
| BG10 |
Force gauge, 10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N, 110V |
$995.00 |
| $945.25 | |
|
| BG10E |
Force gauge, 10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N, 220V |
$995.00 |
| $915.40 | |
|
| BG20 |
Force gauge, 20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N, 110V |
$995.00 |
| $945.25 | |
|
| BG20E |
Force gauge, 20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N, 220V |
$995.00 |
| $915.40 | |
|
| BG50 |
Force gauge, 50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N, 110V |
$995.00 |
| $945.25 | |
|
| BG50E |
Force gauge, 50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N, 220V |
$995.00 |
| $915.40 | |
|
| BG100 |
Force gauge, 100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N, 110V |
$995.00 |
| $945.25 | |
|
| BG100E |
Force gauge, 100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N, 220V |
$995.00 |
| $915.40 | |
|
| BG200 |
Force gauge, 200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N, 110V |
$1145.00 |
| $1087.75 | |
|
| BG200E |
Force gauge, 200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N, 220V |
$1145.00 |
| $1053.40 | |
|
| BG500 |
Force gauge, 500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N, 110V |
$1145.00 |
| $1087.75 | |
|
| BG500E |
Force gauge, 500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N, 220V |
$1145.00 |
| $1053.40 | |
|
| Model |
Options |
List Price |
Sale Price |
| 09-1048 |
Cable, BG/EG/BGI to RS-232, 25-pin |
$60.00 |
| $55.20 | |
|
| 09-1047 |
Cable, gauge to Mitutoyo SPC |
$75.00 |
| $71.25 | |
|
| 09-1048A |
Cable, serial, gauge to PC |
$75.00 |
| $71.25 | |
|
| 09-1090 |
Cable, set point, gauge to test stand |
$145.00 |
| $137.75 | |
|
| 11-1022 |
HI/LO limits indicator for BG/BGI/CG |
$90.00 |
| $85.50 | |
|
| 11-1042 |
Overload protection module, gauge to test stand |
$195.00 |
| $185.25 | |
|
Specifications
| Model |
Capacity x resolution |
| BG012 |
0.12 x 0.00005 lb, 50 x 0.02 gF, 0.5 x 0.0002 N, 110V |
| BG025 |
0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N, 110V |
| BG05 |
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N, 110V |
| BG2 |
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N, 110V |
| BG5 |
5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N, 110V |
| BG10 |
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N, 110V |
| BG20 |
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N, 110V |
| BG50 |
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N, 110V |
| BG100 |
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N, 110V |
| BG200 |
200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N, 110V |
| BG500 |
500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N, 110V |
| For 220V operation add suffix E to model number. Example: BG50E |
|
;)
;)
;)
;)