Our agents are available:
9:00 AM - 6:00 PM EST
Magni MM-410 Rasterizing Multi-format Waveform Monitor / Vectorscope with Analog CRT Display Quality
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   

Magni MM-410 Rasterizing Multi-format Waveform Monitor / Vectorscope with Analog CRT Display Quality


Magni MM-410
Click image to enlarge

 Magni MM-410

Features:
  • Multi-format: Composite, S-Video and 3-wire Component
  • Multi-standard: NTSC/PAL, 525/625
  • Simultaneous Composite and S-Video display outputs for easy routing throughout the facility
  • Vector display for Composite and 3 wire Component
  • 100 ns/division horizontal resolution with anti-alias CRT simulation display
  • Capture and storage of waveform and vector images for signal comparisons
  • Ten user defined memories simplify monitoring of specific operational settings
  • Line selector provides bright displays of VITS or individual lines
  • User-friendly control and interface
  • Compact one RU package and low power for cost-effective operation
  • Available in NTSC and PAL format
Additional Photos
Click image to enlarge


  Description

The MM-410 is a dual-standard (NTSC and PAL) and multi-format (Beta, MII, S-Video, EBU, GBR) monitor. with a unique split screen mode, providing picture, waveform, and vector on a single display. Other features, like the SC/H and Blanking graticule, make advanced measurements easy for the video professional as well as the experienced engineer. 10 memory settings provide instant set-up recall for specific monitoring modes such as Composite parade of filters or Component waveform parade. Magnification and line select features enable viewing of VITS and vertical blanking interval.

Magni's patented raster technology with 10 bit signal processing provides accurate waveform and vector displays on a standard color picture monitor. It allows storage of acquired waveforms, with superior display accuracy as the raster-based display is not subject to CRT errors.

Features include a unique split screen mode, providing picture, waveform, and vector on a single display. Video operators will appreciate the unique peak video over limit region identified in red. Other features, like the SCH and Blanking graticule, make advanced measurements easy for the experienced engineer. User friendly front panel control and 10 memory presets provide instant set-up recall such as Composite parade of filters or Component waveform parade. Magnification and line select modes, enable viewing of VITS and vertical blanking interval.


  Screenshot Gallery



Split-Screen Display

Component Vector

Waveform Limit Line

Component Video Parade


  Models, Options, & Accessories


Model Description List Price Sale Price
MM-410 Multi-standard, multi-format Composite and Component waveform and vector on-screen monitor. Waveform and Vector Rasterizing Monitor - Discontinued - no replacement


  Specifications

Inputs  
Video Inputs: Two loop through inputs (input A and B):
Input A configurable for Composite or S-Video.
Input B configurable for 3 wire Component, S-Video or Composite.
Return Loss: (75 W) > 40 dB to 6 MHz
External Reference Input: Composite loop through (NTSC/PAL)
Outputs  
Picture Monitor Display Output: Composite and S-Video
Memory  
Memory: 10 recallable blue key memories to store MM-410 configurations and front panel settings
Images: Up to 6 recallable waveform/vector images can be stored
Waveform Monitor  
Vertical Gain Accuracy: +/- 1% with 1.0 V input
Vertical MAG: x 2.5 typical
Frequency Response: +/- 1% to 6 MHz, +/- 2% to 8 MHz (waveform mode)
Low Pass Filter Response: +/- 1% of DC at 50 kHz, less than -40 dB at fsc
Band Pass Filter Response: +/-1% of DC at fsc attenuation of greater than 25 dB at 2xfsc 1.5 MHz bandwidth
Transient Response: Pulse to bar ratio: 0.99:1 to 1.01:1 typical
Pulse preshoot/ringing: less than 1%
Line time tilt: less than 1%
DC Restorer: Slow: Typically 12 dB attenuation At 50/60 Hz
Fast: Greater than 26 dB attenuation At 50/60 Hz
Timing difference between channels: +/- 5 ns
Sweep Timing: Accuracy digitally derived
Time Base: 1H (5ms/div), 2H(10ms/div), 2F
Line Select: Displays line 1 through line 262/312
MAG Mode: 0.1ms/div (1H), 1.0ms/div(2H), 2F (approximately x25)
Vectorscope  
Display Accuracy: Amplitude error: +/- 2%
Phase error: +/- 1.25%
Chroma Bandwidth: 700 kHz +/- 100 kHz
Variable Phase: 360 Degree
Vector MAG: x 2.5 Typical
Interfaces  
Interfaces: Ground closure interface
Logic level interface memory recalled for instrument control through memory settings
Mechanical  
Dimensions: 486(19 in)W × 45 mm(1.75 in)H × 432(17 in)D
Weight: 3.4 kg (7.5 lb)
Power Requirements: 100 to 240 VAC, 50/60 Hz 50 VA maximum
Operating Conditions: 0 to 50° C, 90% relative humidity
Safety: Tested to meet or exceed UL 1950, CSA 1402C, IEC 950
CE certified


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET