| 1080i/p * |
60i/59.94i/50i/30p/
29.97p/25p/24p/
23.98p |
SMPTE 274M, 292M |
| 1080PsF * |
30PsF/29.97PsF/
25PsF/ 24PsF/
23.98PsF |
SMPTE RP211, 292M |
| 720p * |
60p/59.94p |
SMPTE 296M |
525i
625i |
59.94i
50i |
SMPTE 259M |
| Ancillary Data |
SMPTE 291M |
| Embedded Audio |
HD-SDI SMPTE299M *, SD-SDI SMPTE 272M |
| Format Setting |
| Format Setting |
Auto or Manual format setting |
| Sampling Frequency |
74.25MHz(HDTV) *, 74.25/1.001MHz(HDTV) *, 13.5MHz(SDTV) |
| SDI Input |
| Input Connector |
BNC connector, 2 systems (A and B switch) |
| Input Impedance |
75 Ω |
| Input Return Loss |
≥15dB, 5MHz to serial clock frequency |
| Max Input Voltage |
±2V (DC+AC peak) |
| Ext Ref Input |
| Input Signal |
Tri-level sync signal * or NTSC/PAL black burst |
| Input Connector |
BNC connector, 1 system 2 connectors |
| Input Impedance |
15kO, Passive Loop-through |
| Input Return Loss |
≥30dB |
| Max Input Voltage |
±5V (DC+AC peak) |
| SDI Output |
| Output Connector |
BNC connector, 1 connector
Reclocks and outputs the selected SDI input signal |
| Output Impedance |
75 Ω |
| Output Voltage |
800 mVp-p ± 10% |
| Output Return Loss |
≥15dB, 5MHz to serial clock frequency |
| CF Memory Card |
| Function |
Saves screen captures, error logs, preset data, and data dumps |
| Remote Control |
| Function |
Recalling of presets, output of errors |
| Control Signal |
TTL level (LOW active) |
| Control Connector |
25-pin D-sub, 1 connector (female) |
| Ethernet |
| Function |
Remote control from PC and output data |
| Type |
10BASE-T/100BASE-TX, Auto switching |
| Input/Output Connector |
RJ-45, 1 connector |
| Standard |
Conforms to IEEE802.3 |
| DVI-I Connector |
| Signal Format |
Single Link T.M.D.S Analog R, G, B |
| Display Format |
XGA |
| DDC Function |
Not Compliant |
| Hot Plug Detect Function |
Not Compliant |
| Output Connector |
DVI-I, 1 system |
| Display |
| Format |
XGA, Effective area 1024x768 dots |
| Full Screen |
Wfm/Vec/Pix/Audio/Status |
| 2-screen Display |
Wfm/Vec, Wfm/Pix, Wfm/Audio, |
| 4-screen Display |
Wfm/Vec/Pix and Audio or Status |
| Waveform |
| Overlay/Parade |
Component signals in overlay/side by side |
| Timing Display |
Calculates and displays Y-CB and Y-CR
Bowtie signals (Authorized by Tektronix, Inc.) |
| EAV/SAV |
Select show or hide |
| GBR Conversion |
Converts YCBCR into GBR display |
| Pseudo-Composite |
Converts/displays pseudo-composite |
| Channel Parade |
GBR or RGB format is selectable |
| Scale |
V or % scale is selectablee |
| Line Select |
Displays the selected line |
| Vertical Axis |
| Gain |
Select x1, x5, or variable |
| Variable Gain |
x0.2 to x10.0 |
| Amplitude Accuracy |
±0.5 % |
| Frequency Response HD * |
Y: ±0.5 % 1MHz-30MHz, CBCR: ±0.5 %
0.5MHz-15MHz |
| Low-pass Attenuation |
≥20 dB at 3.8MHz |
| Frequency Response SD |
Y: ±0.5 % 1MHz-5.75MHz, CBCR: ±0.5 %
0.5MHz-2.75MHz |
| Low-pass Attenuation |
≥20 dB at 3.8MHz |
| Horizontal Axis |
| Horizontal Sweep |
Overlay: 1H, 2H; Parade: 1H, 2H, 3H; Timing: 2H |
| Magnification |
Select x1 or x10 |
| Active Display |
Displays active video only |
| Blank Display |
H Blanking when set to overlay 2H |
| Field Display |
Overlay: 1V, 2V (no 2V p) Parade: 1V, 2V, 3V |
| Time Base Accuracy/Mag |
±0.5%, Select x1, x20, x40 |
| Vector |
| Sensitivity |
Select 75 % or 100 % |
| Accuracy/Gain |
±0.5 %/x1, x5, IQ-MAG, variable x0.2 to x10.0 |
| IQ Axis |
Select show or hide |
| Line Select |
Displays the selected line |
| Pseudo-Composite |
Converts/displays pseudo-composite |
| Picture |
| Marker Display |
Center marker, 4:3, 16:9 *, Safe action, Safe title |
| Line Select |
Displays the selected line |
| Audio |
| Quantization Accuracy |
HDTV: 24 bits *, SDTV: 20 bits |
| Groups |
Select two arbitrary groups from groups 1, 2, 3, and 4 |
| Level Meter Display |
8-channel simultaneous |
| Meter |
60dB, 90dB peak, average VU, Peak hold |
| Status |
| Digital Protocols |
Detects SDI, CRC *, EDH, BCH, Checksum, Parity, Gamut, Composite-Gamut, Audio, Cable Length |
| Data Dump |
| Format |
Serial or component data |
| Line/Sample Select |
Displays the selected line/samples |
| Jump |
Move to EAV or SAV by one-key operation |
| Data Output |
To a PC by CF memory card/Ethernet |
| Error Count |
100,000 selected errors are counted |
| Event Log |
| Log Mode |
Select overwrite or update 1k events |
| Logged Items |
Errored items, time stamps, etc |
| Audio Status |
| Channel Status |
Dumps, analyzes channel status of the embedded audio |
| Voice Control Packets |
Voice control packets analyze/display |
| EDH error |
Displays the status of the EDH error |
| Packet Content |
Analyzes and displays EDH packets |
| Screen Capture |
| Media |
Internal RAM or CF memory card |
| Data Output |
To a PC by CF memory card/Ethernet |
| 30 Presets |
| Media |
Internal RAM or CF memory card |
| Recall Method |
From front panel, remote or Ethernet |
| Copy |
Copy presets to/from CF memory card |
| Other Display Settings |
| LCD Backlight/Auto off |
Select high/low/sleep time |
| Format |
Displays input signal format |
| Color System |
YCBCR, GBR, RGB, or COMP |
| Date/Time |
Select year/month/day order, system clock |
| Illumination of Key LEDs |
Turns on LEDs for all keys |
| General Specifications |
| Operating Temperature |
0-40 °C, =85 % RH (without condensation) |
| Spec-Guaranteed Temperature |
10-30 °C, =85 % RH (without condensation) |
| Power Requirements |
DC 12V (10 to 18V), 30 Wmax |
| Dimensions & Weight |
215(W) x 44(H) x 400(D) mm, 2 kg
8.5 x 1.7 x 15.8 inch, 4.5 lbs |
| Supplied Accessories |
Instruction manual, AC adapter |
| * For LV 7700 only |
;)
