| Format Setting: |
Can be set automatically based on the corresponding format or set manually (Set manually for dual link) |
| Supported Sampling Frequencies: |
HD:74.25 MHz or 74.25/1.001 MHz SD:13.5 MHz |
| External Sync: |
Automatically set from the corresponding format |
| Audio Playback |
| Compliant Standard: |
HD:SMPTE-299M, SD:SMPTE-272M |
| Sampling Frequency: |
48 kHz (must be synchronized to the video signal) |
| Quantization: |
HD:24 bits, SD:20 bits |
| Synchronization: |
All audio channels must be synchronized to the video clock. |
| Channel Separation: |
2 groups of 8 channels are selectable. |
| Input/Output Connectors |
| SDI Input |
| Input Connector: |
2 BNC connectors (A/B switching) |
| Input Impedance: |
75 Ω |
| Input Return Loss: |
≥15 dB for 5 MHz to the serial clock frequency |
| Maximum Input Voltage: |
±2V (DC + peak AC) |
| External Reference Input* |
| Input Signal: |
Tri-level sync or NTSC/PAL black burst signal |
| Input Connector: |
1 pair of BNC connectors loop-through |
| If the video signal waveform or phase difference is displayed using an external sync signal as reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indefinite. |
| AES/EBU Input |
| Input Connector: |
1 BNC connector |
| Supported Formats: |
IEC 60958 |
| Sampling Frequency: |
48 kHz |
| SDI Output |
| Output Connector: |
1 BNC connector
Reclocks and transmits the selected SDI input signal |
| Output Impedance: |
75 Ω |
| Output Voltage: |
800 mVp-p ± 10 % |
| Headphone Output |
| Output Signal: |
The LV 7330 extracts and transmits the audio signal embedded in an SDI signal.(Must be synchronized to the video signal.) |
| Output Connector: |
One 6.3-mm (1/4 in.) stereo jack |
| Volume Adjustment: |
Configured in the menu |
| Impedance: |
32 Ω (16 to 600 Ω) |
| Control Connectors |
| USB Connector |
| Function: |
Used to save screen captures, event logs, preset data, and data dumps |
| Specifications: |
USB 2.0 |
| Media: |
Only USB memory devices are supported. |
| Remote Connector |
| Function: |
Used to recall presets, display a tally light, and switch input channels (A/B) |
| Control Signal: |
TTL level (active-low logic) |
| Control Connector: |
15-pin D-sub (female) |
| Ethernet (Future) |
| Function: |
Used to control the LV 7330 from a PC and monitor errors and other events |
| Compliant Standard: |
IEEE802.3 |
| Input/Output Connectors: |
1 RJ-45 connector |
| Type: |
10Base-T/100Base-TX
(automatic switching) |
| Display Form |
| 1 Screen Display: |
Picture display, CINELITE display, CINEZONE display, video signal waveform display, vector display, status display, or audio display |
| 2 Screen Display: |
Picture display and video signal waveform display
Video signal waveform display and vector display
Video signal waveform display and picture display
Video signal waveform display and audio level display
Audio waveform display and level meter display
|
| 4 Screen Display: |
Select audio level display or status display in addition to video signal waveform display, vectorscope display, and picture display |
| Format Display: |
Displays the video signal format at the top of the screen. |
| Color System Display: |
Displays the video signal color system at the top of the screen. |
| Date Display: |
Displays the date according to the internal clock at the top of the screen |
| Time or Time Code Display: |
Displays the time according to the internal clock or a time code at the top of the screen |
| Screen Capture |
| Function: |
Captures the screen |
| Display: |
Displays the captured image or superimposes the captured image over the input signal |
| Media: |
Internal memory (RAM) and USB memory Only one screen capture can be stored in the internal memory. |
| Data Output: |
Screen captures can be saved as bitmap files or in a file format that the LV 7330 can load.
They can be saved to USB memory or transmitted through an Ethernet and saved on a PC.
|
| Data Input: |
Data saved to USB memory can be loaded and displayed on the LV 7330. |
| Presets Settings |
| Number of Presets: |
30 |
| Recall Method: |
Front panel or remote connector or Ethernet command (The number of presets recalled from the remote connector can be 8 or 30.) |
| Copying: |
Preset configurations can be copied as a group to or from USB memory. |
| Video Signal Waveform Display |
| Waveform Operations |
| Display Modes |
| Overlay: |
Overlays component signals. |
| Parade: |
Displays component signals side by side. |
| Timing: |
Computes and displays Y-CB and Y-CR. Uses a bowtie signal. |
| Blanking Period: |
Show or hide |
| RGB Conversion: |
Converts a Y,CB,CR signal into an RGB signal and displays the result. |
| Pseudo-Composite Display: |
Artificially converts component signals into composite signals and displays the result. |
| Channel Assignment: |
In RGB conversion display, the order can be set to GBR order or RGB order. |
| Line Select: |
Displays the selected line. |
| Sweep Modes: |
H and V |
| Vertical Axis |
| Gain: |
×1 or ×5 |
| Variable Gain: |
×0.2 to ×2.0 |
| Amplitude Accuracy: |
±0.5 % |
| HD Frequency Characteristics |
| Y Signal: |
±0.5 % for 1 to 30 MHz |
| CB,CR Signals: |
±0.5 % for 0.5 to 15 MHz |
| Low-Pass Attenuation: |
≥ 20 dB (at 20 MHz) |
| SD Frequency Characteristics |
| Y Signal: |
±0.5 % for 1 to 5.75 MHz |
| CB,CR Signals: |
±0.5 % for 0.5 to 2.75 MHz |
| Low-Pass Attenuation: |
≥ 20 dB (at 3.8 MHz) |
| Horizontal Axis |
| Line Display: |
×1, ×10, ×20, ACTIVE, or BLANK |
| Field Display: |
×1, ×20, or ×40 |
| Cursor Measurement |
| Composition |
| Horizontal Cursors: |
2 (REF and DELTA) |
| Vertical Cursors: |
2 (REF and DELTA) |
| Amplitude Measurement: |
%, or V |
| Time Measurement: |
usec/msec |
| Frequency Display: |
Computes and displays the frequency with the length of one period set to the time between two cursors. |
| Scale |
| Type: |
%, or V |
| 75 % Marker: |
Displays where the location of the peak of a 75 % color bar chrominance signal would be. |
| Display Colors: |
7 colors to choose from |
| Vector Display |
| Gain: |
×1, ×5, or IQ-MAG |
| Variable Gain: |
×0.2 to ×2.0 |
| Amplitude Accuracy: |
±0.5 % |
| Blanking Period: |
Masked |
| Scale |
| Type: |
75 % or 100 % (color bar) |
| IQ Axis: |
Show or hide |
| Display Colors: |
7 colors to choose from |
| Line Select: |
Displays the selected line |
| Pseudo-Composite: |
Artificially converts component signals into composite signals and displays the result. |
| 5 Bar Display |
| Function: |
Displays five peak levels: those of the Y, R, G, B and composite signals. |
| Error Level: |
Based on gamut error level and composite gamut error level settings. |
| Filter: |
Removes transient errors (The filter characteristics are the same as for gamut errors.) |
| Line Select: |
Displays the selected line |
| Phase Difference Display |
| Display: |
Displays the phase difference between an SDI signal and the external sync signal both numerically and graphically. |
| Display Range |
| Vertical: |
±1 field (for interlace) |
| Horizontal*: |
±1 line |
| * If the video signal waveform is displayed using an external sync signal as a reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indefinite. |
| Picture Display |
| Image Quality Adjustment: |
Brightness, contrast, chroma level, and aperture |
| Display Sizes: |
FIT, ×1, or ×2 (HD)
FIT ×2 (SD) |
| Color Selection: |
Color or monochrome |
| Frame Rate: |
The frame rate is converted and displayed using the internal sync signal. |
| Marker Displays |
| Center Marker |
| Aspect Markers |
| HD: |
4:3, 14:9, 13:9, 2.35:1, 1.85:1, and 1.66:1 |
| SD: |
16:9, 14:9, 13:9, 2.35:1, 1.85:1, and 1.66:1 |
| Safe Action Markers: |
95 %, 93 %, and 90 % |
| Safe Title Markers: |
88 % and 80 % |
| Line Select: |
Marks the selected line |
| CINELITE Display |
| Function: |
f-Stop display, percentage display, and level display |
| f-Stop Display: |
Displays the f value relative to the reference point
The reference point is set to the value of an object with a reflection level of 18 %. |
| f-Stop Gamma Correction |
| Reference Gamma: |
0.45 (ITU-R BT709) |
| User-Defined Correction Tables: |
3 |
| External Correction Tables: |
5 (read from USB memory) |
| Percentage Display: |
Displays luminance or RGB components as percentages. |
| Level Display: |
Displays luminance or RGB components with 256 levels (8 bits). |
| Measured points: |
3 |
| Measurement sizes: |
1 pixel, 3 × 3 pixels, or 9 × 9 pixels |
| CINEZONE Display |
| Function: |
Displays the luminance levels in the picture using different colors |
| Display Colors: |
Linear (1024 colors) or step (12 colors) |
| Upper Limit Setting: |
-6.3 to 109.4 % (values above the upper limit are displayed using white) |
| Lower Limit Setting: |
-7.3 to 108.4 % (values below the lower limit are displayed using black) |
| Level Search Display: |
Displays a specified luminance level ±0.5 % using green on an otherwise monochrome picture display. |
| Luminance Level Setting: |
-7.3 to 109.4 % |
| Embedded Audio Display |
| Lissajous Display |
| Displayed Channels: |
2 channels or 8 channels (only for embedded audio) |
| Display Mode: |
X-Y or MATRIX |
| Sound Image Display |
| Channel Mapping: |
L, R, C, LFE, Ls(s), Rs, LL, RR |
| Surround Formats: |
3-1, 3-2, 3-2-2 |
| Level Meter Display |
| Displayed Channels: |
8ch / 2ch |
| Meter: |
60 dB peak level, 90 dB peak level, average, or loudness |
| Peak Hold Time: |
0.5 to 5.0 seconds/HOLD (when displaying the peak level) |
| Channels |
| Group Selection: |
You can select any 2 groups from groups 1, 2, 3, and 4. |
| Audio Information: |
Detects the presence of each audio channel |
| Sampling Frequency: |
48 kHz (must be synchronized to the video signal) |
| * The LV 7330 cannot display Lissajous curves, 8-channel level meters, or sound images for AES/EBU signals that it receives. |
| Status Display |
| SDI Signal Error Detection |
| Signal Detection: |
Detects the presence of an SDI signal |
| TRS Error: |
Detects TRS location and protection bit errors |
| Line Number Error: |
Detects HD-SDI signal line number errors |
| CRC Error: |
Detects HD-SDI signal transmission errors |
| EDH Error: |
Detects SD-SDI signal transmission errors |
| Gamut Error: |
Detects gamut errors |
| Detection Range Upper Limit: |
90.8 to 109.4 % (0.1 % step) |
| Detection Range Lower Limit: |
-7.2 to 6.1 % (0.1 % step) |
| Filter: |
Removes transient errors
Low-pass (HD: 5 MHz LPF. SD: 1.8 MHz LPF) |
| Composite Gamut Error: |
Detects level errors that occur when component signals are converted to composite signals |
| Detection Range Upper Limit: |
90.0 to 135.0 % (0.1 % step) |
| Detection Range Lower Limit: |
-40.0 to -20.0 % (0.1 % step) |
| Filter: |
Removes transient errors
Low-Pass (HD: 5 MHz. SD: 1.8 MHz) |
| Parity Error: |
Detects ancillary data header parity errors |
| Checksum Error: |
Detects ancillary data transmission errors |
| BCH Error: |
Detects errors in the transmission of the audio signal embedded in an HD-SDI signal |
| Audio CRC Error: |
Detects CRC errors in channel status bits |
| Audio Information Detection: |
Detects the presence of each audio channel |
| Error Count: |
Up to 100,000 errors (Only the specified errors are counted.) |
| Count Period: |
Only one error is counted for each second or frame. |
| Event Log Display |
| Recording Capacity: |
Up to 1,000 events |
| Description: |
Records all events from start to finish |
| Recorded Events: |
Errors, changes in input type, time stamps, etc. |
| Data Output: |
Event logs can be saved to USB memory or sent to a PC through an Ethernet connection as text data. |
| Data Dump Display |
| Display Modes: |
Display data separated by serial data sequence or by channel |
| Line Select: |
Displays the selected line |
| Sample Select: |
Displays from the selected sample |
| Jump Feature: |
Jumps to an EAV or SAV |
| Data Output: |
Event logs can be saved to USB memory or sent to a PC through an Ethernet connection as text data. |
| Audio Status Display |
| Control Packets: |
Analyzes and displays SDI signal audio control packets |
| Channel Status: |
Analyzes and displays or displays the dump of the channel status of the embedded audio signal |
| EDH Display |
| EDH packets: |
Analyzes and displays received EDH packets |
| Closed Caption Display |
| Compliant Standard: |
ARIB STD-B37/CEA-608, ELA-708 |
| Display Details: |
Analyzes and displays the closed caption signal. |
| Inter-Stationary Control Data Display (NET-Q) |
| Compliant Standard: |
ARIB STD-B39 |
| Display Details: |
Analyzes and displays inter-stationary control data |
| Data Broadcast Trigger Signal Display |
| Compliant Standard: |
ARIB STD-B35 |
| V-ANC User Data Display |
| Standard Supported: |
ARIB TR-B23 |
| Time Code Display |
| Corresponding Time Code: |
Selects LTC or VITC SMPTE RP-188 |
| Display Method: |
Switches the display of internal clock, and the time code. |
| Front Panel |
| Key LEDs: |
You can dimly light all of the keys by pressing the shortcut key. |
| Power Switch: |
Turns the power on and off. If power is removed when the switch is on, the instrument will turn on when power is restored. |
| Last Memory: |
Backs up the panel settings. |
| Environmental Conditions |
| Operating Temperature: |
0 to 40°C |
| Operating Humidity: |
85 %RH or less (no condensation) |
| Power Supply |
| Voltage: |
10 to 18 VDC |
| Power Consumption: |
18 W max. |
| Dimensions |
| |
215(W) × 44(H) × 250(D) mm
(excluding protruding parts) |
| Weight |
| |
1.3 kg |
| Accessories |
| |
Instruction manual..................................1
AC adapter (LP 1960).............................1
15-pin D-sub connector.........................1
15-pin D-sub connector cover ..............1
Ferrite core.............................................1
|
;)
;)
;)
;)
;)
;)
