| Supported Standards |
ISO/IEC 13818-1 |
| Profile and Level |
MP@HL, MP@ML, 422@ML, 422P@HL |
| Input Connector |
| Input Connector |
BNC-R |
| Number of Input Connectors |
1 connector, 75 Ω |
| Maximum Input Voltage |
±2 V (DC + peak AC) |
| Input Signal |
| Serial Clock |
270 MHz |
| Transmission Mode |
Packet/Burst |
| Maximum Bit Rate |
66 Mbps |
| Supported Packet Sizes |
188, 204, and 208 bytes |
| Packet Size Detection |
Audio Detects supported packet sizes |
| Video Formats |
1920x1080i / 59.94, 60, 50 (4:2:0,4:2:2)
1440x1080i / 59.94, 60, 50 (4:2:0,4:2:2)
1280x720p / 59.94, 60, 50 (4:2:0,4:2:2)
720x480i / 59.94 (4:2:0,4:2:2)
720x576i / 50 (4:2:0,4:2:2) |
| Audio Signals |
MPEG-2 AAC, Dolby Digital(AC-3), MPEG-1
LAYER-2, LPCM(SMPTE 302M)
(LV 58SER40A (DIGITAL AUDIO) is necessary separately. In addition, when decoding Dolby Digital (AC-3), Dolby E option is necessary) |
* This unit decodes only one set of video data and audio data.
Even if you use the LV 5800 multi display, the unit cannot decode different video and audio
streams simultaneously.
If you assign the display showing the data that this unit is decoding to multiple displays and you
change the PID of the data being decoded, the PIDs on all displays change simultaneously. |
| Waveform Operation |
| Display Mode |
Overlay display (displays component signals overlaid) Parade display (displays component signals side by side) |
| Y, CB, CR to G, B, R Conversion |
Converts Y, CB, CR signals into G, B, R and displays the result |
| Pseudo-Composite Display |
Displays component signals artificially as composite signals |
| Channel Assignment |
G, B, R or R, G, B order (when displaying G, B, R converted signals) |
| Line Select |
Displays the selected line |
| Image Quality Adjustment |
Adjusts the brightness |
| Sensitivity |
| V Scale |
0 to 0.7 V, -0.3 to 0.7 V |
| % Scale |
0 to 100 %, -50 to 100 % |
| Gain |
x1, x5, variable |
| Variable Gain |
x0.2 to x2 |
| Amplitude Accuracy |
±0.5 % |
| HDTV Frequency Characteristics |
| Y Signal |
±0.5 % (1 to 30 MHz) |
| CB,CR signal |
±0.5 % (0.5 to 15 MHz) |
| Low-pass Attenuation |
20 dB or more (at 20 MHz) |
| SDTV Frequency Characteristics |
| Y Signal |
±0.5 % (1 to 5.75 MHz) |
| CB,CR signal |
±0.5 % (0.5 to 2.75 MHz) |
| Low-pass Attenuation |
20 dB or more (at 3.8 MHz) |
| Line Display |
| Display Mode |
Overlay: 1H, 2H
Parade: 1H, 2H, 3H |
| Magnification |
x1, x10, x20, ACTIVE, BLANK |
| Field Display |
| Display Mode |
Overlay: 1V, 2V *1
Parade: 1V, 2V, 3V |
| Magnification |
x1, x20, x40 |
| Time Accuracy |
±0.5 % |
| *1 The 2V display is not allowed if the input signal is progressive. |
| Composition |
| Horizontal Cursors |
2 cursors (REF and DELTA) |
| Vertical Cursors |
2 cursors (REF and DELTA) |
| Amplitude Measurement |
Percentage and voltage displays |
| Time Measurement |
Displays time in seconds |
| Frequency Measurement |
Displays the frequency by considering the time
between cursors to be a cycle |
| Scale |
75 %, 100 % (for the color bars) |
| Gain |
x1, x5, IQ-MAG, variable |
| Variable Gain |
x0.2 to x2 |
| Amplitude Accuracy |
±0.5 % |
| IQ Axis |
Show or hide |
| Pseudo-Composite Display |
Displays component signals by converting to composite signals that have burst added artificially. (The color matrix for HDTV signals is converted to SDTV.) |
| Image Quality Adjustment |
Adjusts the brightness |
| HDTV Display |
Displayed by sampling pixels |
| SDTV Display |
Displayed by interpolating pixels |
| Marker Display |
Center marker display
4:3 or 16:9 marker display
Safe action marker display
Safe title marker display |
| Line Select |
Marks the selected line |
| Display Size |
Optimized display, actual size display |
| Image Quality Adjustment |
GBR level adjustment, contrast adjustment, brightness adjustment |
| PAT |
| PAT Detection |
Automatically recognizes packets whose PID is 0000h as PAT |
| Cycle Measurement *2 |
Measures the PAT cycle in 1-ms intervals |
| PAT data display |
PAT dump display |
| PMT |
| PMT Detection |
Select the PID of the PMT to be decoded |
| Cycle Measurement *2 |
Measures the PMT cycle in 1-ms intervals |
| PMT data display |
PMT dump display |
| NIT |
| NIT Detection |
Automatically detects packets with the NIT PID specified by the PAT. |
| Cycle Measurement *2 |
Measures the NIT cycle in 1-ms intervals |
| CAT |
| CAT Detection |
Recognizes packets whose PID is 0001h as CAT |
| Cycle Measurement *2 |
Measures the CAT cycle in 1-ms intervals |
| PCR |
| PCR detection |
Automatically detects packets with the PCR PID specified by the selected PMT |
| Cycle Measurement *2 |
Measures the PCR cycle in 1-ms intervals |
| PCR jitter |
Measures the PCR accuracy based on the internal reference clock |
| *2 : If a section is divided into multiple |
TS packets, the cycle is measured for each section. |
| Function |
Dump display of the PAT, PMT, and the dump display of the selected packet |
| Notation |
Displays binary and hexadecimal values and contents |
| Function |
Displays the bit rate and cycle of the main sections and packets |
| Bar Display |
Displays the occupied bandwidth with respect to the TS bit rate using bars |
| Displayed Sections |
NIT, CAT, PAT, and PMT |
| Displayed Packets |
Video, audio, PCR, and null |
| Environmental Conditions |
Conforms to the LV 5800 |
| Power Supply |
Supplied from the LV 5800 70 W max. (if one unit is installed to the LV 5800) 20 W max. (additional power consumption for each additional unit installed to the LV 5800) |
| Weight |
0.4 kg |
;)
