| Video Formats and Corresponding Standards |
| Video Signal Standards |
| |
| Other Standards |
| Ancillary data standard |
SMPTE 291M |
| Embedded audio standard |
HD-SDI SMPTE 299M
SD-SDI SMPTE 272M |
| Format Setting |
| SDI Signal |
Auto setting or manual setting from the supported formats |
| Sampling Frequency |
74.25 MHz (HDTV), 74.25/1.001 MHz (HDTV), 13.5 MHz (SDTV), 4:2:2 YCBCR signal |
| External Synchronization |
Auto setting from supported formats |
| Input/Output Connector |
| SDI Input |
| Input Connector |
2 BNC connectors 2 systems (A/B switching type) |
| External Synchronization Input |
| Input Signal |
Tri-level or NTSC/PAL black burst |
| Input Connector |
1 system 2 BNC loop through connectors |
| SDI Output |
| Output Connector |
1 BNC connector |
| Headphone Output |
| Output Signal |
Separates and outputs the embedded audio signal in the SDI signal |
| IF Slot |
| Installable Units |
One of the following can be installed: compact flash memory card unit (standard), remote control unit (sold separately), and Ethernet unit (sold separately) |
| Compact Flash Memory Card Unit |
| Function |
Saves screen captures, error logs, preset data, and data dumps |
| Remote Control Unit (Sold Separately) |
| Function |
Recalls presets and outputs alarms |
| Control connector |
D-sub 25 pin 1 connector (female) |
| *If you install this unit, you will not be able to use the compact memory card unit that comes standard or the Ethernet unit that is sold separately |
| Ethernet Unit (Sold Separately) |
| Function |
Remote control from an external computer |
| Type |
10BASE-T/100BASE-TX Auto switching, one connector |
| *If you install this unit, you will not be able to use the compact memory card unit that comes standard or the Ethernet unit that is sold separately |
| Display Format |
| Display Format |
XGA Effective area 1024 x 768 dots |
| Display |
| Screen Display |
Waveform display, vectorscope display, picture display, audio display, or status display |
| Screen Display |
Waveform and vectorscope display, waveform display and picture display, or waveform display and audio level display |
| Screen Display |
Select audio display or status display in addition to waveform display, vectorscope display, and picture display |
| Waveform Display |
| Waveform Operation |
| Display Mode |
Overlay display: Displays component signals in overlay |
| Parade display |
Displays component signals side by side |
| Timing Display |
Displays by calculating Y-CB and Y-CR Uses bowtie signals (authorized by Tektronix, Inc.) |
| EAV-SAV Period |
Select show or hide |
| G, B, R, Conversion |
Converts YCBCR signals into RGB or YRGB and displays the result |
| Pseudo-Composite Display |
Artificially converts component signals into composite signals and displays the result |
| Channel Assignment |
Select G, B, R order or R, G, B order during G, B, R conversion display |
| Line Select |
Displays the selected line |
| Vertical Axis |
| Gain |
Select x1, x5, or variable (up to x10) |
| Amplitude Accuracy |
<± 0.5 % |
| Horizontal Axis |
| Line Display |
Display format
Overlay: 1H, 2H
Parade: 1H, 2H, 3H
Timing: 2H
Magnification
Select x1 or x10
|
| Field Display |
Display Format
Overlay: 1V, 2V
(2V display not allowed for progressive)
Parade: 1V, 2V, 3V
Magnification
Select x1, x20 or x40 |
| Time Base Accuracy |
<± 0.5% |
| Cursor Measurement |
| Configuration |
Horizontal: 2 cursors (REF and Δ)
Vertical: 2 cursors (REF and Δ) |
| Vectorscope Display |
| Gain |
Select x1, x5, IQ-MAG, or variable |
| Amplitude Accuracy |
< ± 0.5% |
| IQ Axis |
Select show/hide |
| Simple Picture Display |
| HDTV Display |
Displayed by sampling the pixels |
| SDTV Display |
Displayed by interpolating pixels |
| Display Frame Rate |
Converts the frame rate using the internal synchronization signal and displays the result |
| Audio Level Display |
| Audio Signal |
Select two arbitrary groups from embedded audio signals in the SDI signal |
| Level Meter |
| Display Channel |
Simultaneous 8 ch display |
| Meter |
60 dB peak level or 90 dB peak level |
| Reference Level |
Select -20dB, -18dB, or -12dB |
| Scale |
Select absolute dB display or reference level 0 dB display |
| Status Display |
| SDI Signal Status Display |
| Signal Detection |
Detects the presence or absence of SDI signals |
| CRC Error |
Transmission error of HD-SDI signals |
| EDH Error |
Transmission error of SD-SDI signals |
| BCH Error |
Transmission error of embedded audio signals in the HD-SDI signal |
| Checksum Error |
Transmission error of ancillary data |
| Gamut Error |
Detects gamut errors |
| Detection Range |
Upper limit: 90.0 % to 109.4%
Lower limit: -7.2% to +6.0%
0.1% steps |
| Composite Gamut Error |
Monitors the level error when the component signal is converted into composite signal |
| Detection Range |
Upper limit: 90.0% to 135.0%
Lower limit: -40% to -20%
0.1% steps |
| Audio Information Detection |
Detects the presence or absence of audio on each channel |
| Error Count |
Up to 100,000 errors |
| Data Dump Display |
| Display Format |
Displayed separately by serial data sequence or channel |
| Event Log |
| Number of Logs |
Up to 1,000 events |
| Audio Status |
| Voice Control Packets |
Analyzes and displays the voice control packets of the SDI signal |
| EDH Display |
| EDH |
Displays the status of the EDH packets |
| Screen Capture |
| Capture |
Captures the displayed screen |
| Media |
Internal memory (RAM) or compact flash |
| Presets |
| Number of Presets |
30 |
| Environmental Conditions |
| Operating Environment |
Indoor/outdoor use (no rain water) |
| Operating Altitude |
Up to 2000 m |
| Overvoltage category |
1 |
| Pollution Degree |
2 |
| Power Requirements |
| 12 VDC (10 to 18 V), 30 W max. |
| Dimensions (W x H x D) |
8.5 x 5.25 x 4 in., 215 x 133 x 103 mm (excluding protrusions)
8.75 x 5.625 x 6.125 in., 221 x 143 x 168 mm (including protrusions) |
| Weight |
| 5.5 lbs., 2.5 kg |
| Accessories |
| Instruction manual |
;)
