•HD-SDI/SD-SDI Color LCD Waveform Monitor •Displays Eye Patterns and Automatically Measures Physical Characteristics.(Optional) The Cabinet is sold separately.

PATENTED : Equivalent cable length measurement (The panel design is subject to change.) Model Description List Price Sale Price LV-5700 Multi SDI Monitor - Discontinued - replaced by Leader LV5700A LV-5700 OP70 Eye Pattern Display for LV5700 - Discontinued - replaced by Leader LV5700A OP70 LV-5700 OP71 DC Operation for LV5700 - Discontinued - replaced by Leader LV5700A OP71

GENERAL

The LV 5700 is a waveform monitor with XGA TFT color LCD for HD-SDI and SD-SDI signals. The functions of waveform monitor, vectorscope, audio lissajous, and simple picture monitor are achieved with a single unit. The signals are processed digitally enabling highly accurate measurements.  In addition, extensive error detection functions and analysis functions are provided which allows SDI signals to be monitored.

FEATURES
1.	Input Receives either HD-SDI signals or SD-SDI signals.  Supports multiformat, and automatic and manual setting of formats is possible.
2.	Display Employs an LCD monitor with XGA resolution. Various displays such as waveform display, vector display, picture display, and status display can be placed side by side on the XGA monitor. You can monitor these displays simultaneously. Depending on the combination, bowtie, embedded audio, and data dump can also be displayed. Furthermore, each display can be magnified.
3.	Operation The LV 5700 can be controlled through the panel and remotely controlled through a computer via the Ethernet network. In addition, presets can be recalled using the remote connectors on the rear panel.
4.	Extensive Analysis Functions The LV 5700 can also be used as an analyzer to detect multiple types of transmission errors, detect gamut errors, display data dumps, analyze the contents of voice control packets, measure the equivalent cable length, and so on.
5.	Output Provides HD-SDI/SD-SDI switching type reclock output as well as analog picture monitor output and AES/EBU output. In addition, an analog XGA output connector is provided enabling information to be displayed on a large external monitor.
6.	Power Supply (Optional: DC power supply) Since a DC power supply (9 to 17 V) can be used in addition to the AC power supply (90 V to 250 V), the LV 5700 can also be used on the field.
7.	Eye Pattern Display (Optional) Displays eye patterns and automatically measures physical characteristics.

Specifications
Video Format
HD-SDI	Video System: 1 2   1920x1035 / 60i   1920x1035 / 59.94i 3 4 5 6 7 8 9 10 11 12   1920x1080 / 60i   1920x1080 / 59.94i   1920x1080 / 50i   1920x1080 / 30p   1920x1080 / 29.97p   1920x1080 / 25p   1920x1080 / 24p   1920x1080 / 23.98p   1920x1080 / 24sF   1920x1080 / 23.98sF 13 14 15 16 17 18 19 20   1280x 720 / 60p   1280x 720 / 59.94p   1280x 720 / 50p   1280x 720 / 30p   1280x 720 / 29.97p   1280x 720 / 25p   1280x 720 / 24p   1280x 720 / 23.98p Standards Supported    HD-SDI Standard:    Ancillary Data Standard:    Embedded Audio Standard: SMPTE 292M SMPTE 291M SMPTE 299M
SD-SDI	Video System:  1   525 / 59.94i  2   625 / 50i Standards Supported    SD-SDI Standard:    Ancillary Data Standard:    Embedded Audio Standard: SMPTE 259M SMPTE 291M SMPTE 272M
Format Setting	Video System: Select manual setting or automatic setting Sampling Frequency    HD: Auto switching between 74.25 MHz and 74.25/1.001 MHz    SD: 13.5 MHz
Input/Output Connector
HD-SDI Input	Input Connector: BNC connector  2 systems A and B, 75
External Reference Input	Input Signal: Tri-level sync signal or NTSC/PAL black burst Input Connector: BNC connector passive loop-through 1 system 2 connectors
XGA Output	Output Signal: Output Connector: XGA signal D-sub 15 pin female
HD-SDI Output	Output Connector: BNC connector 1 connector Outputs the selected channel, 75
Analog Output	Output Signal: Output Connector: Y, PB, PR or GBR BNC connector  1 system 3 connectors
AES/EBU Output	Output Signal: CH1/2, CH3/4, CH5/6, CH7/8 Separated from embedded audio and output Select 2 groups (8 ch) from 4 groups (16 ch) Output Connector: BNC connector  4 connectors
Remote Connector	Function: Recalling of presets Control Signal: TTL level (LOW active) Control Connector: D-sub 25 pin female  1 connector
Ethernet Connector	Function: Remote control from an external computer and monitoring of errors, etc. Input/Output Connector: 10BASE-T  1 connector
Display Format
Display Format	XGA effective area 1024x768 dots
Dot Clock	65 MHz or 64.935 MHz (Automatically switch according to the input signal)
Horizontal Frequency	48.363 kHz or 48.315 kHz (Automatically switch according to the input signal)
Vertical Frequency	60 Hz or 59.94 Hz (Automatically switch according to the input signal)
Multi Display	Displays waveform display, vector display, picture display, and status display on a single screen side by side
Magnified Waveform Display	Displays video signal waveforms magnified on the entire screen
Magnified Vector Display	Displays vector waveforms magnified on the entire screen
Magnified Picture Display	Displays color pictures magnified on the entire screen
Magnified Audio Display	Displays embedded audio magnified on the entire screen
Waveform Display
Waveform Operation	EAV-SAV Period: Select show/hide GBR Conversion: Select Y, PB, PR or GBR conversion display Sweep Magnification: Select x1 or x5 Channel Assignment: Select GBR order or RGB order during GBR conversion display
Vertical Axis	Filter: Flat, low-pass
Horizontal Axis	Operation Mode    Overlay: Displays multiple waveforms overlaid    Parade: Displays waveforms side by side    Timing: Measures the time difference and the amplitude  difference between channels Uses bowtie signals  (Authorized by Tektronix, Inc.)   Display Format    Line Display: 1H, 2H, 3H    Line Magnification: 1H MAG, 2H MAG, 3H MAG    Field Display: 1V    H Blanking Display: Displays the H blanking period    V Blanking Display: Displays the V blanking period
Scale	Scale Display    Voltage Scale: 0 V to 0.8 V, -0.4 V to 0.8 V    % Scale: 0 % to 110 %, -50 % to 120 %
Vector Display
Sweep Magnification	Select from x1, x2, P-MAG, and x5.
Scale	Color bar switching type between 75 % and 100 %
EAV-SAV Period	Show/hide is synchronized with the waveform display setting
I, Q Axes	Show/hide is a switching type
Picture Display
HD Display	Reduced display
SD Display	Magnified display
Embedded Audio Display
Lissajous Display	Display Channel: Select from 2 ch or 8 ch display Display Method: Select X-Y or L-R
Sound Image Display	Display Channel: Select from 3-1 ch, 3-2 ch, and 3-2-2 ch displays
Peak Level Meter Display	Display Channel: Simultaneous 8 ch display Display Method: Peak meter
Channel	Ch Mapping: Can be mapped arbitrary from 1 ch to 8 ch
User Bit Display	Data Dump Display: Displays 192 bits sequentially Analysis Display: Analyzes and Displays the user bit
Data Dump Display
Display Format	Displayed separately by serial data sequence or channel.
Digital Signal Analysis
CRC Error	Detects video signal errors
BCH Error	Detects embedded audio errors
Checksum Error	Detects ANC data errors
Parity Error	Detects ANC data errors
TRS Error	Detect TRS errors
EDH Error	Detects EDH errors
Line Number	Detects line number errors
Gamut Error	Detects level overrange of GBR video signals
Level Error	Detects vide level and reserved data error
Audio Sequency	Detects continuity errors of embedded audio
Format Detection	Detects the SDI video signal format
Audio Information Detection	Detects the presence or absence of embedded audio on each channel Detects the sampling frequency for each group Displays voice control packets
External Sync Lock Detection	Detects the synchronization relationship between  the external synchronization signal and the SDI signal
Equivalent Cable    Length Measurement	Measures the SDI signal level Displays the cable length converted to 800 mVp-p signal source level
Signal Detection	Detects the presence or absence of SDI signals
Line Selector
Operation Mode	Interlocked type between waveform display, vector display, and picture display
Preset
Number of Presets/Items	8 points/all settings
Recall	Through the front panel, remote connector, and Ethernet Up to 8 points of recall from the remote connector
Cursor Measurement
Configuration	Horizontal cursor: 2 lines (REF, ) Vertical cursor: 2 lines (REF, )
Amplitude Measurement	Measured in [%] and [V]
Time Measurement	Displayed in [µs] and [ms]
Frequency Measurement	Displays the frequency in which the time between cursors  is considered a cycle.
Environmental Conditions
Operating Temperature	0 to +40 °C
Operating Humidity	10 to 80 % RH (without condensation)
Spec Guaranteed Temperature	+10 to +30 °C
Spec Guaranteed Humidity	10 to 80 % RH (without condensation)
Operating Environment	Indoor use
Operating Altitude	Up to 2,000 m
Overvoltage Category	II
Pollution Degree	2
Power Requirements	90 to 250 VAC (50 Hz/60 Hz), 120 W max. 9 to 17 VDC(Optional), 110 W max.
Dimensions and Weight	215 (W) x 133 (H) x 447 (D) mm, 5 kg
Accessories	Fuse.....1 25-pin D-sub connector.....1 25-pin D-sub connector cover.....1 Cover, inlet stopper.....1 Screw, rack mounting (inch size).....2 Power cord.....1 Instruction manual.....1