| SMPTE 274M/292M |
SMPTE 296M, 292M |
| 1080i/60 |
720p/60 |
| 1080i/59.94 |
720p/59.94 |
| 1080i/50 |
720p/50 |
| 1080p/30 |
720p/30 |
| 1080p/29.97 |
720p/29.97 |
| 1080p/25 |
720p/25 |
| 1080p/24 |
720p/24 |
| 1080p/23.98 |
720p/23.98 |
| SMPTE RP211, 292M |
SMPTE 259M |
| 1080PsF/30 |
525i/59.94 |
| 1080PsF/29.97 |
625i/50 |
| 1080PsF/25 |
|
| 1080PsF/24 |
|
| 1080PsF/23.98 |
|
| Other Standards |
| Embedded Audio Standard |
SMPTE 299M (HD-SDI), SMPTE 272M (SD-SDI) |
| Quantization |
20 bits |
| Synchronization |
Must be synchronized to all video clocks |
| Channel Selection |
Two groups ( eight channels in the same SDI channel) selectable |
| Input/Output Connectors SDI Input |
| Input Connectors |
Two BNC connectors |
| Input Impedance |
75 Ω |
| Input Return Loss |
>= 15 dB 5 MHz to the serial clock frequency |
| Max. Input Voltage |
±2V (DC+AC peak) |
| SDI Output |
| Output Connector |
One BNC connector Re-clocks and transmits the selected SDI input signal |
| Output Impedance |
75 Ω |
| Output Voltage |
800 mVp-p ±10 % |
| Maximum Return Loss |
>= 15 dB 5 MHz to the serial clock frequency |
| External Reference Input*1 |
| Input Signal |
Tri-level sync or NTSC/PAL black burst |
| Input Connectors |
One pair of BNC connectors |
| Input Impedance |
15 kΩ passive loop-through |
| Headphone Output |
| Output Signal |
Extracts and transmits the embedded audio signal (audio data must be synchronized to video) |
| Sampling Frequency |
Supports 48 kHz |
| Output Connector |
One stereo miniature |
| jack Impedance |
16 Ω |
| LCD Display |
| LCD Type |
6.5-inch color XGA TFT |
| Effective area |
1,024 X 768 dots |
| Backlight Brightness |
32 adjustable levels |
| Auto Shutoff |
Time to turn off the LCD can be set |
| Screen Capture |
| Capture |
Captures the screen to a image file Only one screen image can be stored in the internal memory; storage to USB thumbdrive depends on drive size |
| Data Output |
Screen captures can be saved as bitmap files to USB memory or to a PC over the Ethernet. |
| Data Input |
Data saved to USB memory can be loaded and displayed on the LV 5380. |
| Presets |
| Display Mode Presets |
Only stores settings specific to each display mode |
| Number of Presets |
30 total |
| Display Mode Presets |
Five presets for each display mode |
| Waveform Display |
| Overlay Display |
Overlays component signals |
| Parade Display |
Displays component signals side by side |
| Blanking Period |
H and V blanking periods can be masked |
| RGB Conversion |
Converts Y, CB, CR signals into RGB and displays the result |
| Pseudo-Composite Display |
Digitally converts component signals into composite and displays the result |
| Channel Assignments |
G, B, R or R, G, B selectable for RGB conversion display |
| Line Select |
Displays the selected line |
| Vertical Axis |
| Gain |
X1 or X5 selectable |
| Variable Gain |
X0.2 to X2.0 |
| Amplitude Accuracy |
<= ± 0.5 % |
| Frequency Characteristics HDTV |
| Y Signal |
<= 0.5 % for 1 to 30 MHz |
| CB, CR Signals |
<= 0.5 % for 0.5 to 15 MHz |
| Low-Pass Attenuation |
>= 20dB (at 20 MHz) |
| Frequency Characteristics SDTV |
| Y Signal |
<= 0.5 % for 1 to 5.75 MHz |
| CB, CR Signals |
<= 0.5 % for 0.5 to 2.75MHz |
| Low Pass Attenuation |
>= 20dB (at 3 8MHz) |
| Horizontal Axis |
| Line Display |
X1, X10, X20, ACTIVE, or BLANK selectable |
| Field Display |
X1, X20, or X40 selectable |
| Cursor Measurement |
| Types |
Two horizontal cursors (REF and DELTA) and two vertical cursors (REF and DELTA) |
| Amplitude Measurement |
In % or V |
| Time Measurement |
In usec or msec |
| Frequency Display |
Displays the frequency by assuming the interval between the cursors to be one period |
| Scale |
| Type |
% scale or V scale selectable |
| Color |
Selectable from seven colors |
| Thumbnail Display |
Can display thumbnails of picture displays and audio level meters |
| Vectorscope Display |
| Gain |
X1, X5, or IQ-MAG selectable |
| Variable Gain |
X0.2 to X2.0 |
| Amplitude Accuracy |
<= ± 0.5 % |
| Scale |
| Type |
75 % or 100 % selectable |
| IQ Axis |
Show or hide selectable |
| Color |
Selectable from seven colors |
| Pseudo-Composite Display |
Digitally converts component signals into composite and displays the result |
| Thumbnail Display |
Can display thumbnails of picture displays and audio level meters |
| 5 Bar Display |
| Bar Display |
Displays the peak levels of Y, R, G, B, and composite |
| Channel Assignments |
RGB or GBR selectable |
| Scale |
mV or % selectable |
| Error Level |
Based on gamut error level and composite gamut error settings. |
| Picture Display |
| Color Temperature |
6500K or 9300K selectable |
| Quality Adjustment |
Brightness, contrast, gain, bias, aperture |
| Display Size |
Fit, Full Frame, real and 4:3 full screen |
| Color |
R, G, or B can be turned off separately. Chroma gain and monochrome available. |
| Frame Rate |
Displays by converting the frame rate using the internal sync signal |
| Aspect Marker Display |
4:3, 13:9, 14:9, or 16:9 selectable |
| Aspect Marker Format |
Line, shadow , black (three types) |
| Safety Marker Size |
ARIB TR-B4, SMPTE RP-218, or user-defined selectable |
| Line Select |
Displays a mark on the selected line |
| Gamut Error Display |
On-picture gamut error indication |
| Thumbnail Display |
Displays thumbnails of audio level meters |
Embedded Audio Display
Lissajous Display |
| Display Channels |
2ch (single) or 8ch (multi) selectable |
| Display Mode |
X-Y or L-R selectable |
| Level Meter Display |
| Display Channels |
2ch or 8ch display selectable |
| Meter |
60 dB peak level, 90 dB peak level, or average selectable. Includes peak-hold feature. |
| Channels |
| Group Selection |
Select any two groups within the same SDI channel |
| Audio Information Detection |
Detects the presence of each audio channel |
| Sampling Frequency |
48 kHz (must be synchronized with the video signal) |
| Status Display |
| Event Log |
Stores up to 1,000 events |
| Data Dump Display |
Dumps data by serial data sequence or by channel |
| Data Output |
Can be saved in text format to USB memory or PC |
| Phase Difference Display |
| Display |
Displays numerically and graphically the phase difference between an SDI signal and the external sync signal |
| Display Range |
| Vertical |
±1 field (for interlace)
±1/2 frame (for progressive) |
| Horizontal |
±1 line |
| Error Count |
| Error Count |
Counts up to 999,999 video, audio, and gamut errors separately |
| Count Period |
Counts all errors that occur in one field as one error |
| Video Errors |
| CRC Error |
Detects transmission errors of HDSDI signals |
| EDH Error |
Detects transmission errors of SDSDI signals |
| Gamut Error |
| Gamut Error |
Detects gamut errors |
| Detection Range Upper Limit |
90 to 109.4 % |
| Lower Limit |
-7.2 to +6.1% (0.1 % steps) |
| Composite Gamut Error |
Monitors level errors when component signals are converted to composite signals |
| Detection Range Upper Limit |
90 to 135.0 % |
| Lower Limit |
-40 to -20 % (0.1 % steps) |
| Audio Errors |
| CRC Error |
Detects CRC errors in channel status bits |
| BCH Errors |
Detects transmission errors of HD-SDI audio packets |
| Time Display |
| Current Time Display |
Time display based on the internal clock |
| Elapsed Time |
Time elapsed since the error count was cleared |
| Time Code |
LTC or VITC selectable (complies with SMPTE RP-188) |
| Other Display Features |
| ID Display |
ID can be assigned to each input channel. |
| Tally Indicator |
One of the remote connectors can be modified so that tally indication can be shown on the screen (future support). |
| Front Panel |
| Key LEDs |
All keys illuminate dimly. (The selected key illuminates brightly.) |
| Last Memory |
Backs up panel settings to memory |
| Environmental Conditions |
| Operating Temperature |
0 to 40 °C |
| Operating Humidity Range |
<= 85 % RH (without condensation) |
| Operating Environment |
Indoors |
| Operating Altitude |
<= 2,000 m |
| Overvoltage Category |
I |
| Pollution Degree |
2 |
| Power Requirements |
10 to 18 VDC, 30 W max |
| Dimensions |
8(W) x 6(H) x 3.5(D) inches (excluding projections) |
| Weight |
4.5 lbs |
| Option Sold Separately |
AC adapter LP1960 |
*1. The video signal waveform display and vectorscope display may be
delayed by up to 1 frame with respect to the picture display.
V sweep is not available when observing 2 sources simultaneously..
External reference timing is phase accurate to +/-1 clock cycle. |
;)
