company logo Leader LV 5152DA Waveform Monitor
     Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.  
 
 
 



Leader LV 5152DA Waveform Monitor




Click image to enlarge

Leader LV5152DA

Datasheet
User's Manual
Presentation

Features:
  • Multi-Format HDTV Waveform Monitor
  • Digital and Analog Inputs
  • 8-CH AES/EBU Digital Audio Outputs
  • YPbPr or GBR Analog Pic Monitor Output
  • External Reference for Analog and Digital Timing
  • Digital Data Dump in Hex
  • Extensive Error Logging and Custom Alarms
  • System Matrices for 1080i/720p and 1035i
  • RGB Gamut Error and p-p Readout of WFM Components
  • Auto System Recognition and Setup with Display
  • Selectable 16, 18, 20 or 24 Bit Audio Monitoring
 PickHit Award 1999



  Description

Model LV 5152DA provides full monitoring facilities for 1080i/60 (59.94)/50, 1080p/30 (29.97)/25/24 (23.98)/24sF (23.98sF), 1035i/60 (59.94) and 720p/60 (59.94) systems. (A switchable matrix accommodates Y formulation for both 1035i and 1080i/720p systems.) The unit accepts two SDI inputs and provides a switched active output of the selected input. One set of analog-component inputs accepts YPbPr or GBR. Waveforms may be monitored in YCbCr or GBR form, in three-channel overlaid or parade display. Other display modes include Vector (with the choice of electronic or external illuminated graticule), timing (bowtie), picture and stereo (Lissajous). A decoded three wire picture monitor output may be set in either YPbPr or GBR.

New features include the capture and readout of data for all data points in the raster in hex form for addressable lines and data addresses. In addition, a readout of SDI level in terms of equivalent cable length from an ideal source is provided. Of particular value is the ability to separate embedded digital audio with eight channels of AES/EBU digital output. A YCbCr conversion to GBR facilities gamut checks to spot illegal colors. Cursor measurements provide 0.5% accuracy.

Extensive menu-selected operations give wide ranging control over operating parameters and include the line select (with numbering readout corresponding to the chosen system) and precision cursor measurements of level, time and frequency. The preset system stores ten front-panel settings for instant (and remote) recall, and a new on-screen display reduces preset recalls to a single key stroke.

An advanced error reporting system, applicable to 1080i systems, records the time of the first detected error, time elapsed since the first error and the total error count in that period. Errors are detected in video (Y & C), embedded audio and ancillary data with provision for remote indication. A white phosphor CRT is standard.




  Models, Options, & Accessories


Model Description List Price Sale Price
LV5152DA HDTV Digital/Analog Waveform Monitor $16995.00
Instant
* Price Quote *
LV-5152DA OP70 NTSC Input $1545.00
Instant
* Price Quote *



  Specifications

APPLICABLE STANDARDS
  BTA S-004B, S-005B, S-006B
SMPTE 274M, 291M, 292M,296M
SERIAL DIGITAL INPUTS
Number of Inputs 2 BNC
Impedance 75 Ω, internally terminated
Return Loss ≥ 15 dB 5 MHz to 742.5 MHz
≥ 10 dB 742.5 MHz to 1.45 GHz
Max Input ± 2 V dc or ac pk
ANALOG INPUTS
  1 set 3 BNC inputs, passive loop-through
CH1 (Y/G), CH2 Pb/B, CH3 Pr/R 1 loop-through set BNC EXT REF
Return Loss ≥ 30 dB (50 kHz to 30 MHz)
Max Input ± 12 V dc or ac pk
Impedance ≥ 15 kΩ
Ext. Ref Sensitivity 0.3 V p-p ± 6 dB
OUTPUTS
SDI Active Output Selected A or B input
Output Level 800 mV p-p ± 10%
Analog Picture Monitor Outputs YPbPr or GBR selectable
Output Level 1 V p-p ± 5%
Frequency Response 25 Hz to 30 MHz within ± 5%
AES/EBU OUTPUTS
Output Signals CH1/2, CH3/4, CH5/6, CH7/8
Output Impedance 75 Ω
Output Connectors 4 BNC
Amplitude 1.0 V ± 10%
Sampling Frequency 48 kHz
Quantizing Accuracy Selected from 16, 18, 20, 24 bits
VERTICAL SECTION
Deflection Sensitivity Within ± 1%, GAIN x1
Within ± 3%, GAIN x5
GBR Matrix Within ± 1%
Frequency Response, Analog Flat: Within 1% 25 Hz to 30 MHz
Low Pass: ≥ -20 dB at 20 MHz
DIF’D Step: ≥ -20 dB at 30 kHz
≥ -20 dB at 7 MHz
DC Restorer Speed Slow: ≤ -20% at 60 Hz
Fast: ≥ -80% at 60 Hz
Transient Response (2T Pulse & Bar) Pulse-bar Ratio,Overshoot, Pre-shoot, Ringing, Sag:Within ± 1%
DC Restorer Clamp Timing Fixed: Back porch
Variable: 0.5 to 2 µs relative to sync rising edge
HORIZONTAL SECTION
Modes Overlay, Parade,Timing (for use with Bowtie signal). Use of the Bowtie authorized by Tektronix, Inc.
Sweep Displays Line: 1H, 2H, 3H (Parade)
1H MAG,2H MAG,3H MAG (Parade) Field: 1V, 2V, 3V (Parade)
1V MAG, 2V MAG, 3V MAG (Parade)
Time Base Accuracy Within ± 3% (0.1 µs/div)
Linearity Within ± 3%
VECTOR MODE
Amplitude Accuracy ± 2% (YPbPr and GBR inputs)
PICTURE MODE
  Displays Y or G signal with line-select strobe
AUDIO MODE
Input Direct coupled balanced
Input Impedance ≥ 20 kΩ
Full Scale Reading 0, 2, 4 dBm (menu selectable)
Accuracy ± 0.5 dB
X-Y Phase Accuracy Within 1° at 20 kHz
CALIBRATION SIGNAL
  1V ± 0.5%
DIGITAL FUNCTIONS
Error Display* Time of first error
Total error count from first error
Elapsed time from first error
Error details video Y/C,ANC,AUDIO
Settable alarms:Video,ANC,AUDIO
Alarm Display: Front panel LED, remote
* Not applicable to 720p operation
Data Dump Function 10 bit data converted to Hex
Equivalent Cable Length Based on cable LS 5CFB
LINE SELECT
Trigger Field 1, Field 2,All (interlaced signal)
frame for progressive
Selectable Lines 1 to 1125 or 1 to 750
Line Window 1 to 15 lines
PRESET FUNCTION
Number of Presets 10 front panel settings
Controls Covered All controls and mode selections including DIGITAL, CURSORS, LINE SELECT

Control settings not stored: INTEN, READOUT INTEN,ROTATION, FOCUS, scale ILLUM,POWER ON/OFF On-screen display of preset identifiers for single keystroke recall
REMOTE CONTROL
Remote Preset Selection 10 presets
Control Signal TTL low active
Control Input D-sub 25-pin (REMOTE), rear panel
CURSOR MEASUREMENTS
Configuration 2 horizontal REF,Δ
2 vertical REF,Δ
Vertical Measurement Range 0-2000 mV, 0-280.0%
Accuracy ± 0.5%
Resolution 1 mV or 0.1%
Ratio Measurement X% with respect to 100% REF
Time Measurement Range At least ± 6 div from screen center
Accuracy ± 3%
Resolution 1/80 div
Time Ratio X% with respect to 100% REF
Frequency Measurement Calculated from cursor span of 1 period
CRT
Effective Display Area 80 x 100 mm
Graticule Internal and External (vector)
Electronic (vector and audio)
Phosphor White standard
POWER REQUIREMENTS
  90 to 250 V ac, 48 to 440 Hz, 130 VA max
PHYSICAL
Size (W x H x D) 83/8 x 51/4 x 17 in.
215 x 132 x 429 mm
Weight 12 lbs., 5.5 kg
ENVIRONMENTAL
Guaranteed Accuracy 10 to 35°C, 10 to 80% RH
Operating Temperature 0 to 40°C, 10 to 90% RH
SUPPLIED ACCESSORIES
  5 Spare Illumination Lamps
1 Spare Fuse
1 25-Pin D-Sub Connector
1 25-Pin D-Sub Connector Shell
1 Power Cord Retainer
OPTIONAL ACCESSORIES
  Carrying Case with Handle & Feet (LR-2427I-U)



  Selection Guide

DTV & HDTV Digital and/or Analog Waveform, Vector, Picture & Audio Monitors
Feature
  LV5800 LV5700A LV5750 LV7800 LV7720 LV5100D
(LV5100DE)
LV5152 LV5152DA
  Multi Monitor
Platform
HD/SD-SDI
with options
for various
systems
HD/SD-SDI
Portable
Multi-SDI
Rasterizer
SD-SDI
Rasterizer
(Upgradeable
to HD)
SD-SDI and
SD Analog
(with Eye
Pattern)
HD Analog HD-SDI and
HD Analog
INPUTS
SD-SDI and HD-SDI 2 BNC 2 BNC 2 BNC 2 BNC        
Dual Link HD-SDI 2 BNC OP77   2 BNC        
SD-SDI Only         2 BNC 2 BNC w. Loop    
HD-SDI Only               2 BNC
MPEG Stream Yes** OP60   Yes**        
Discrete AES/ABU OP40 OP75   OP40        
Composite NTSC OP03     OP03   Y Input    
Composite PAL OP03     OP03   Y Input    
Analog HD Component (3-wire)             2 sets 1 set
Analog SD Component (3-wire)           1 set 2 sets  
Additional SD/HD OP01A OP72   OP01A        
External Reference Black Burst Yes Yes Yes Yes Yes Yes    
Ext Ref Tri-Level Sync Yes Yes Yes Yes     Yes Yes
DISPLAY AND CONTROL
Built-In XGA Display Yes Yes Yes Yes        
Built-In CRT Display           Yes Yes Yes
Rasterized Output Yes Yes   Yes Yes      
CF Memory Card Yes (USB) Yes Yes Yes Yes      
Ethernet Access and Control Yes Yes Option Yes Yes      
OUTPUTS
SDI Output Yes Yes Yes Yes Yes Yes Yes Yes
AES/EBU Disembed OP40 Yes   OP40       Yes
Analog (RGB or YPbPr) Decode   Yes       Yes   Yes
MONITORING MODES
Waveform Yes Yes Yes Yes Yes Yes Yes Yes
Vectorscope Yes Yes Yes Yes Yes Yes* Yes Yes
Picture Yes Yes Yes Yes Yes Yes (SID) Yes (SID) Yes (SID)
Color Space/Gamut Yes Yes Yes Yes Yes      
Embedded Audio OP40 Yes Yes OP40 Yes      
Analog Audio           Yes Yes Yes
Discrete AES/EBU OP40 OP75   OP40        
Status & Data Yes Yes Yes Yes Yes Yes   Yes
Level & Gamut Error Yes Yes Yes Yes Yes     Yes
Closed Caption Display Yes Yes Yes Yes Yes      
Protocol Error Yes Yes Yes Yes Yes      
Eye Pattern OP02 OP70 or OP76   OP02   Yes
(LV5100DE only)
   
MPEG Stream Decoder Yes** OP60   Yes**        
MPEG Stream Decoder OP01A OP72   OP01A        
MISCELLANEOUS
AC Operation Universal Universal   Universal   Universal Universal Universal
DC Operation   OP71 12Vdc   12Vdc      
* LV5100D and LV5100DE Vectorscope does not work for composite signals.
** Support in future.



 

Welcome | Companies | Search by Type | How To Order | Leasing | About Us | Careers
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
BBBOnline Reliability Seal, Click for confirmation page. Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET
 



Live chat by BoldChat
Need help? We have a staff
of more than 30 people to help you.
Let us show you why over 100,000
customers choose Tequipment.NET