Video Signal
Video Data Quantization Parameter	Number of Bits  (Common to G/Y, B/PB, R/PR): 8 bits (except sync signals)
Component Signal	* Specifications are common to both HDTV and SDTV unless otherwise noted.   Specifications   HDTV: Conforms to SMPTE PR160 standards.   SDTV: Conforms to EBU-N10, SMPTE 253M standards.   Video Signal Format:   G, B, R or Y, PB, PR can be selected via the front panel controls.   Output Impedance: 75 Output Connector: BNC, 15-pin mini D-sub, D connector , Simultaneous output Number of Outputs   BNC (G, B, R/Y, PB, PR, selectable): 2   15-Pin Mini D-sub: 1   D connector: 1   Sync Signal   Tri-Level      HDTV: Added to G/Y, B/PB, and R/PR   Binary Level      SDTV: Added to G/Y   Output Control Function   Sync Signal ON/OFF: Settable for G, B, R   INVERT: Inverts pattern.
Composite Signal	* In NTSC system, specifications are common to NTSC-M (USA) and NTSC-J (Japan) unless otherwise noted.   Specifications: Conforms SMPTE 170M, ITU-R BT.470 standards Color System: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, SECAM   Setup Level: 0 % fixed for monoscope pattern   NTSC-M, PAL-M: 7.5 %   NTSC-J, NTSC4.43, PAL, PAL-N, PAL-60: 0 %   SECAM: 0 %   Output Impedance: 75 Output Connector: BNC, RCA jack Number of Outputs: 1 each Output Control Function   INVERT: Inverts luminance only.
Y/C Separation Signal	Specifications: Conforms to JEITA CPR-1201 standards Signal Specifications: Same as the composite signal (except NTSC-J) Output Connector: S connector Number of Outputs: 1   Aspect Ratio ID Signal: Superimposed on the C signal in NTSC-J mode   Output Impedance in DC: 10 k 3 k   Aspect Ratio ID Signal Voltage: 0 V fixed for all formats (except NTSC-J)   S1 (squeeze signal output): 5 V   S2 (letter box signal output): 2.2 V   4:3 Signal Output: 0 V   Output Control Function   INVERT: Inverts luminance only.
Computer Monitor Signal	Specifications: Conforms to VESA STANDARDS Video Signal Format: G, B, R   Output Impedance: 75 Output Connector: BNC, 15-pin mini D-sub, simultaneous output Number of Outputs   BNC (G, B, R Only): 2   15-Pin Mini D-sub: 1   Sync Signal   Binary Level: Added to G   Output Control Function   SYNC ON G: ON/OFF, selectable   INVERT: Inverts pattern.
D Connector  Output (Applicable to D5)	Specifications: Conforms to JEITA CP-4120 (D1/D2/D3/D4/D5 outputs), RC-5237 standards Video Signal   Signal Specifications: Same as the component signal   Format: G, B, R or Y, PB, PR can be selected via the front panel controls.   Output: Always output; does not detect whether a plug is inserted.
	ID Signal
	No. Format Line No. Format Line 1 (V) 2 (V) 3 (V) 1 (V) 2 (V) 3 (V) Component, HDTV Composite 1 1080p/59.94 5 5 5 18 NTSC-M 0 0 0 2 1080i/59.94 5 0 5 19 NTSC-J 4:3             (S)             (L) 0 0 0 0 0 0 0 0 0 3 1080p/29.97 5 2.2 5 4 1080p/23.98 5 2.2 5 5 1080PsF/23.98 5 0 5 20 NTSC 4.43 0 0 0 6 1080p/50 5 5 5 21 PAL 0 0 0 7 1080p/25 5 2.2 5 22 PAL-M 0 0 0 8 1080i/50 5 0 5 23 PAL-N 0 0 0 9 720p/59.94 2.2 5 5 24 PAL-60 0 0 0 10 720p/29.97 2.2 2.2 5 25 SECAM 0 0 0 11 720p/23.98 2.2 2.2 5 Computer Monitor 12 720p/50 2.2 2.2 5 26 VGA 0 0 0 13 720p/25 2.2 2.2 5 27 SVGA 0 0 0 Component, SDTV 28 XGA 0 0 0 14 480p/60 0 5 5 29 SXGA 0 0 0 15 480i/60 4:3             (S)             (L) 0 0 0 0 0 0 0 5 2.2 Note that the formats not prescribed by JEITA CP-4120 standards are dedicated for this instrument. 16 576p/50 0 2.2 5 17 576i/50 4:3             (S)             (L) 0 0 0 2.2 2.2 2.2 0 5 2.2
	Output Impedance in DC: 10 k 3 k Auxiliary Lines 1, 2, 3: No connection Connector: D connector conforming to JEITA RC-5237 standards D Connector Pin Assignments Pin No. Signal Pin No. Signal 1 G/Y 8 Line 1 2 G/Y_GND 9 Line 2 3 B/PB 10 Auxiliary line 2 4 B/PB_GND 11 Line 3 5 R/PR 12 Detects whether a plug is inserted. GND 6 R/PR_GND 13 Auxiliary line 3 7 Auxiliary line 1 14 Detects whether a plug is inserted.
DVI Output	Specifications: Conforms to DDWG (Digital Display Working Group) DVI standards. Signal Format: Single Link T.M.D.S (digital signal only) Applicable Format:       VGA, SVGA, XGA      HDTV (except 1080p/60, 1080p/50, 720p/24)      SDTV (except 480i/60, 576i/50)   DDC Function: Not available HOT PLUG Detection: Not available   Output Control Function   INVERT: Inverts pattern. Output Connector: DVI-D Number of Outputs: 1 DVI Connector Pin Assignments Pin No. Signal Pin No. Signal 1 T.M.D.S Data 2- 13 No Connect 2 T.M.D.S Data2+ 14 +5 V Power 3 T.M.D.S Data2 Shield 15 GND(for +5 V) 4 No Connect 16 No Connect 5 No Connect 17 T.M.D.S Data0- 6 No Connect 18 T.M.D.S Data0+ 7 No Connect 19 T.M.D.S Data0 Shield 8 No Connect 20 No Connect 9 T.M.D.S Data1- 21 No Connect 10 T.M.D.S Data1+ 22 T.M.D.S Clock Shield 11 T.M.D.S Data1 Shield 23 T.M.D.S Clock+ 12 No Connect 24 T.M.D.S Clock- *No signal is output when Y, PB, PR is selected in the VGA format.
15-Pin Mini D-Sub	15-pin mini D-sub Connector Pin Assignments Pin No. Signal Pin No. Signal 1 R/PR 9 Auxiliary 2 G/Y 10 SYNC GND 3 B/PB 11 Auxiliary 4 GND 12 Auxiliary 5 GND 13 HD 6 R/PR GND 14 VD 7 G/Y GND 15 Auxiliary 8 B/PB GND   * For the G/Y, B/PB, R/PR, selecting the format can output Y, PB, PR or G, B, R.
G, B, R Level Control	Function: G, B, R output level can be respectively adjusted by using the screwdriver adjustment on the bottom. Adjustable Range:  0 to 1.0 Vp-p (into 75 load, active picture)
Sync Signal Output
CS Output	Output Impedance: 75 Output Connector: BNC Number of Outputs: 2
HD Output	Level: TTL level Output Connector: BNC, 15-pin mini D-sub Number of Outputs   BNC: 2   15-pin mini D-sub: 1   Output Polarity: Negative (positive for SVGA, SXGA), Selectable in user setting mode
VD Output	Level: TTL level Output Connector: BNC, 15-pin mini D-sub Number of Outputs   BNC: 2   15-pin mini D-sub: 1   Output Polarity: Negative (positive for SVGA, SXGA), Selectable in user setting mode

Audio Signal
Frequency	OFF/ 1 kHz/ 400 Hz, selectable
Output Level	1.2 Vp-p 0.12 V (into 600 load)
Output Impedance	600
Output Connector	RCA jack
Number of Outputs	2 each
Functions
Startup Memory	Front panel settings are stored in the internal memory when power is turned on.
Preset/Recall	Up to 100 front panel settings (address 00 to 99) can be stored/recalled.
Area Settings	Consecutive addresses, out of 100 addresses, can be recalled.   Begin address: BEGIN   End address: END
Remote Control	Front panel controls can be remotely controlled with a personal computer via the RS-232C interface.
Address Remote Control Mode	By grounding the connector pin, the address to be recalled can be incremented (INC) or decremented (DEC). The begin address (BEGIN) can also be set by grounding the pin.
User Setting Mode	HD Output, VD Output: Output polarity can be set in each format. Ramp Pattern: Superimposing this signal on the PB, PR output can be set ON/ OFF. Step Pattern: Superimposing this signal on the PB, PR output can be set ON/ OFF. Multiburst Pattern: Superimposing this signal on the PB, PR output can be set ON/ OFF.
Environmental Conditions
Operating Temperature	0 to 40 °C
Operating Humidity	90 % RH (without condensation)
Spec Guaranteed Temperature	10 to 30 °C
Spec Guaranteed Humidity	85 % RH (without condensation)
Operating Environment	Indoor use
Operating Altitude	Up to 2,000 m
Overvoltage Category	II
Pollution Degree	2

Power Requirements	90 to 250 VAC (50 Hz/60 Hz), 60 W max.
Dimensions and Weight	426 (W) 88 (H) 400 (D) mm (excluding projections), 5.6 kg
Accessories	Power cord.....1 Instruction manual.....1