| Test Signal Output |
| Format |
NTSC
NTSC + REFERENCE *2
NTSC + ID *3
NTSC + REFERENCE + ID *2*3
NTSC + SETUP
NTSC + SETUP + REF *2
NTSC + SETUP + ID *3
NTSC + SETUP + REF + ID *2*3
PAL *4
PAL + REFERENCE *4*2
*2 REFERENCE and REF denote Field Reference.
*3 ID denotes 10 field ID.
*4 The 25-Hz offset subcarrier is used for the PAL system. |
| Pattern |
(1) COLOR BAR 100 % (White: 100 %, Color saturation: 100 %)
(2) COLOR BAR 75 % (NTSC only) (White: 100 %, Color saturation: 75 %)
(3) EBU COLOR BAR (PAL only)
(4) BBC COLOR BAR (PAL only)
(5) SMPTE COLOR BAR (NTSC only)
(6) FLAT FIELD 100 %
(7) FLAT FIELD 50 %
(8) FLAT FIELD 0 %
(9) CROSS HATCH 1 (NTSC: 16 lines [H], 17 lines [V] PAL: 19 lines [H], 17 lines [V] )
(10) CROSS HATCH 2 (NTSC: 13 lines [H], 17 lines [V] PAL: 13 lines [H], 17 lines [V] )
(11) LINE SWEEP 100 % (0.5 to 5.6 MHz, Marker: 1.0, 2.0, 3.0, 4.0, 5.0 MHz)
(12) LINE SWEEP 60 % (0.5 to 5.6 MHz, Marker: 1.0, 2.0, 3.0, 4.0, 5.0 MHz)
(13) MULTI BURST 100 % (0.5, 1.0, 2.0, 3.0, 4.0, 5.75 MHz)
(14) MULTI BURST 60 % (0.5, 1.0, 2.0, 3.0, 4.0, 5.75 MHz)
(15) SHALLOW RAMP
(16) 10 STEP
(17) MOD 10 STEP
(18) RAMP
(19) MOD RAMP
(20) MONOSCOPE (NORMAL/INVERT)
(21) RED RASTER (Color saturation: 75 %)
(22) WINDOW
(23) PULSE & BAR (NTSC: 2T pulse, 12.5T pulse, 2T bar) (PAL: 2T pulse, 20T pulse, 2T bar) |
| NATURAL Picture *5 |
Up to five screens of 24-bit full color BMP file can be simultaneously switched.
*5 The Option LT 443D-70 should be installed in the mainframe to enable this function. |
| APL |
MODE: APL OFF, APL HIGH, APL LOW, APL (BOUNCE), BOUNCE
APL (BOUNCE) is switched at a preset time interval for APL HIGH and APL LOW.
BOUNCE is switched at a preset time interval for FLAT FIELD 100 % and FLAT FIELD 0 %.
Time Interval: 1 to 20 seconds (settable in one second steps) |
| ID Character |
Number of Characters: Up to 20
Size: 32 x 32 dots, 64 x 64 dots, selectable
Display Position: Arbitrary position on the screen.
Blinking: OFF, 1 to 10 seconds
(settable in one second steps) |
| Simple Motion Picture Function |
Direction: 8 directions (up, down, left, right, and combinations)
Speed
H: 0 to 256 dots in 4 dot steps
V: 0 to 256 lines in 2 line steps
(Pattern can be scrolled in field time steps.) |
| Timing Variable |
The timing of OUTPUT 1 and 2 can be varied simultaneously.
H-PHASE: Up to ±1 line-1 dot
Resolution: Variable in 1 dot steps
(corresponding to 27 MHz clock frequency)
V-PHASE: Up to ±1 frame-1 line
Resolution: Variable in 1 line steps
F-PHASE: NTSC: Up to ±5 frames
PAL: Up to ±2 frames
Resolution: Variable in 1 frame steps |
| Number of Outputs |
2 |
| Black Signal Output |
| Format |
Depends on the test signal format.
(Supports the Field Reference and 10 field ID) |
| Output Signal |
Analog black burst |
| Timing Variable |
The timing of OUTPUT 1 and 2 can be varied simultaneously.
H-PHASE: Up to ±1 line-1 dot
Resolution: Variable in 1 dot steps
(corresponding to 27 MHz clock frequency)
V-PHASE: Up to ±1 frame-1 line
Resolution: Variable in 1 line steps
F-PHASE: NTSC: Up to ±5 frames
PAL: Up to ±2 frames
Resolution: Variable in 1 frame steps |
| Number of Outputs |
2 systems (one each) |
| Signal Level |
1 Vp-p (into 75Ω) |
| Horizontal Drive Pulse Output |
| Format |
Depends on the test signal format. |
| Signal Level |
2 Vp-p (into 75Ω) |
| Signal Polarity |
Negative |
| Timing Variable |
H-PHASE: Up to ±1 line-1 dot
Resolution: Variable in 1 dot steps
(corresponding to 27 MHz clock frequency) |
| Number of Outputs |
1 |
| Vertical Drive Pulse Output |
| Format |
Depends on the test signal format. |
| Signal Level |
2 Vp-p (into 75Ω) |
| Signal Polarity |
Negative |
| Timing Variable |
V-PHASE: Up to ±1 frame-1 line
Resolution: Variable in 1 line steps |
| Number of Outputs |
1 |
| Environmental Conditions |
| Operating Temperature Range |
0 to 40°C |
| Operating Humidity Range |
≤ 90 % RH (without condensation) |
| Spec Guaranteed Temperature Range |
10°C to 35°C |
| Spec Guaranteed Humidity Range |
≤ 85% RH (without condensation) |
| Operating Environment |
Indoor use |
| Operating Altitude |
Up to 2,000m |
| Overvoltage Category |
I |
| Pollution Degree |
2 |
| General |
| Power Source |
Supplied by the LT 443D mainframe |
| Dimensions |
79 (W) x 41 (H) x 371 (D) mm (excluding projections) |
| Weight |
Approx. 0.5 kg |
;)
