Model	Description	List Price	Sale Price
LE1876	Digital Processing Jitter Analyzer (Blue Ray)	$14995.00	Instant * Price Quote *

Input Section HF INPUT (1-7 modulation signal input)
Input Coupling	AC
Measurement Voltage Range	0.1 to 2.0 V p-p
Input Range	3 ranges
0.3 V range	0.1 to 0.3 V p-p
0.9 V range	0.3 to 0.9 V p-p
2.0 V range	0.9 to 2.0 V p-p
Input Impedance	50 Ω
Auto Slicer	AUTO (Response time constant
x1 speed	10 kHz, x2 speed 20 kHz)
Maximum Input Voltage	± 2.5 V
Measurement Control (ARMING IN/INHIBIT IN)
Input Impedance	10k Ω
Input Signal Level	0/+5 V
Maximum Input Voltage	-0.7 V/+5.7 V
Equalizer Section x1 Speed Conforms to Blu-ray Disc (Part 1, version 1.0) standards
Applicable format	1-7 PP modulation
Channel Bit Rate	66 MHz
Equalizer Mode	Conventional Equalizer Mode or Limit
Gain Variable Range	0 to 8 dB (36 steps)
Gain Accuracy	±0.5 dB
Group Delay Deviation	2.0 nsp-p (5.8 dB: 6 MHz to 33 MHz)
Jitter Measurement Section
HF	Clock frequency
x1 speed	66 MHz ±4 %
x2 speed	132 MHz ±4 %
Measurement Mode	DATA to CLOCK, PERIOD mode, sum of all-T data in PERIOD mode, PULSE WIDTH mode, sum of all-T data in
PULSE WIDTH mode
Measurement Resolution	12.5 ps
Display Resolution
max. min	12.5 ps min.
σ,AVERAGE	10 ps min.
σ/T	0.01% min.
Measurement Accuracy
Sigma Value	± 5%
Polarity Section
CLOCK	(fixed)
Measurement Item	AVERAGE, max, min, σ, σ max, σ min, σ/T, σ/T max, σ/T min.
Unit Displayed	ns,%
Measurement Results Display	Numeric value, bar graph, histogram, TIME DEVIATION, BOTH for separate display
Number of Samples	1,000,000 max.
Measurement Control Section (ARMING/INHIBIT function)
Measurement Control Mode	ARMING mode/INHIBIT mode
Electrical Characteristics
Input Impedance	10k Ω
Input Signal Level	0/+5 V
Maximum Input Voltage	-0.7 V/+5.7 V
INHIBIT
ENABLE	HIGH/LOW
COUNT	0 to 50, in 1 steps
ARMING
SLOPE	RISE/FALL
COUNT	0 to 50, in 1 steps
START DLY	0 to 99.99 ms (in 0.01 steps)
LENGTH MODE	SAMPLE/TIME
LENGTH	0.01 to 99.99 ms (in 0.01 steps min.) (TIME only)
Clock Regenerator (DATA to CLOCK mode only) Regenerates reference clock signal from DATA signal input.
HF	x1 speed: 66 MHz ±8 %
x2 speed	132 MHz ±8 %
Clock Frequency Measurement Section (DATA to CLOCK mode only)
HF	x1 speed: 60.72 MHz to 71.28 MHz
x2 speed	121.44 MHz to 142.56 MHz
Measurement Accuracy	±0.1 %
Judgement Section
Outputs	GO/NO GO results of jitter and frequency measured with respect to the preset values.
LCD Panel	Judgement results for selected measurement item
Selected Item	σ, σ max, σ min, σ/T, σ/T max, σ/T min, max, min,AVE, DEV, DEV max, DEV min, FREQUENCY
MONITOR OUT To monitor the HF signal input
Output Impedance	50 Ω
Output Amplitude	Up to 2.0 Vp-p ±30 % (into 50 Ω, in proportion to input signal)
Output Connector	BNC
EQUALIZER OUT To monitor equalized HF signal input
Output Impedance	50 Ω
Output Amplitude	0.8 Vp-p ±30 % (into 50 Ω)
Output Connector	BNC
DIGITAL OUT (DATA, CLOCK) Outputs binary DATA signal and CLOCK signal regenerated by PLL.
Output Signal	DATA signal, CLOCK signal
Output Amplitude	0.15 Vp-p (into 50 Ω)
Output Offset Voltage	0.34 V (into 50 Ω)
Output Connector	BNC
DC OUT
Output Accuracy	±2 %
Output Item	Jitter (full scale voltage variable)
Maximum Input Voltage	2 V
GATE MONITOR To monitor arming/inhibit control signals
Output Amplitude	TTL level
Output Impedance	1k Ω
Dedicated Remote Control
Connector	Communicates judgement results and front panel settings
Front Panel Setting Pins
Input Level	0/5 V (pulled-up with 47k Ω resistor)
Maximum Input Voltage	-0.7/+5.7 V
Judgement Results Output Pins
GO	+5 V (open drain output, pulled-up with 47k Ω resistor)
NO GO	0 V
Maximum Current Output	10 mA
Communication	Controls function, outputs data
Baud Rate	38400 bps max.
Display Mode
HIST	Histogram
BAR	Bar graph
DATA	Statistical value
TIME	Time deviation
JUDGE	GO/NO GO judgement
Store/Recall
Media	Internal memory, memory card
Items Stored	Measurement data (waveform), internal settings
Printing Screen Data
Print Media	Memory card
Memory Card
Interface	Conforms to PC CARD ATA standards
Card Manufacturers	Recommended: SanDisk
Display	5.7” STN LCD, color 1/4 VGA
General Specifications
Operating	Temperature: 0 to 40° C Humidity: 85 % RH (without condensation)
Spec-Guaranteed	Temperature: 0 to 30° C Humidity: 85 % RH (without condensation)
Operating Environment	Indoor Use
Operating Altitude	Up to 2,000 m
Overvoltage Category	II
Pollution Degree	2
Power Requirements	90 to 250 VAC, 50/60 Hz, max. 55 W, 80 VA max
Dimension (WxHxD)	83/8 x 53/16 x 1113/16 in., 213 x 132 x 300 mm
Weight	8.8 lbs., 4.0 kg
Accessories	Power cord (1), Instruction Manual
OPTION OP71 DVD/CD Measurement
DATA INPUT (EFM/8-16 modulation signal input)
Input Coupling	AC (2 Hz/1 kHz, selectable)
Measurement Voltage Range	50 mV to 5 Vp-p
Input Impedance	1M Ω/50 Ω, selectable
Slice Level
VARIABLE	±2.5 V
AUTO (ASYMMETRY ON)	20 Hz/1 kHz/5 kHz/10 kHz, selectable
Maximum Input Voltage	±5 V
Jitter Measurement Section
DVD	Clock Frequency: PW, PD: 24.3 MHz to 59.4 MHz
DT to CK	x1 speed: 27 MHz ±10 %
x2 speed	54 MHz ±10 %
CD	x1, x2, x4x, x8, x10, x12 speed
Measurement Mode
DVD	PERIOD mode, sum of all -T data in PERIOD mode, PULSE WIDTH mode,
sum of all -T data in PULSE WIDTH mode,DATA to CLOCK
CD	PULSE WIDTH mode, sum of all -T data in PULSE WIDTH mode
Unit Displayed	ns,%
Measurement Resolution	50 ps
Display Resolution	0.01 ns
Measurement Accuracy
Sigma Value	±4 % ±0.15 ns
Average Value	±1 ns
CLOCK	+, -
Measurement Item	AVERAGE, max, min, σ, σ max, σ min, σ/T, σ/T max, σ/T min.
Measurement Results Display	Numeric value, bar graph, histogram, TIME DEVIATION, BOTH for separate display
Number of Samples	1,000,000 max
Clock Frequency Measurement Section (DVD,DATA to CLOCK mode only)
Measurement Range	24.3 MHz to 59.4 MHz
Measurement Accuracy	±0.1 %
Clock Regenerator (DVD,DATA to CLOCK mode only) Regenerates reference clock signal from DATA signal input.
HF	x1 speed: 27 MHz ±8 %
x2 speed	54 MHz ±8 %
Ooptional OP72 HFM Measurement
Input Coupling	AC
Measurement Voltage Range	50 mV to 5 Vp-p
Input Impedance	1 MΩ/50 Ω, selectable
Frequency Range	x1 speed : 8 MHz, x2 speed: 16 MHz
Slice Level	±2.5 V (VARIABLE)
Maximum Input Voltage	±5 V
Jitter Measurement Section
Measurement Range	Clock Frequency
PW	3.37 MHz to 7.92 MHz
DT to CK	x1 speed: 3.667 MHz ±8 %
x2 speed	7.333 MHz ±8 %
Measurement Mode	DATA to CLOCK, PERIOD mode, sum of all -T data in PERIOD mode, PULSE WIDTH mode, sum of all -T data in
PULSE WIDTH mode
Unit Displayed	ns,%
Measurement Resolution	50 ps
Display Resolution
max. min	50 ps
σ,AVERAGE	10 PS
σ/T	0.01%
Measurement Accuracy
Sigma Value	±5 %
Polarity Section
CLOCK	(fixed)
Measurement Item	AVERAGE, max, min, σ, σ max, σ min, σ/T, σ/T max, σ/T min.
Measurement Results Display	Numeric value, bar graph, histogram, TIME DEVIATION, BOTH for separate display.
Number of samples	1,000,000 max
Clock Regenerator (DATA to CLOCK mode only) Regenerates reference clock signal from DATA signal input.
HFM	x1 speed: 3.667 MHz ±8 %
x2 speed	7.333 MHz ±10 %
Clock Frequency Measurement Section (DATA to CLOCK mode only)
Measurement Range	x1 speed: 3.37364 MHz to 3.96036 MHz
x2 speed	6.74636 MHz to 7.91964 MHz
Measurement Accuracy	±0.1 %
Optional OP73 GPIB (IEEE 488.2)
Function	Transfers data, controls front panel settings
Optional OP74 LAN
Function	Transfers data, controls front panel settings.
Option Compatability
Note	OP71 and OP72 Cannot be installed together OP73 and OP74 Cannot be installed together.

---