|
LeCroy 104MXs WaveSurfer MXs
Oscilloscope Series
1 GHz, 2.5 GS/s, 4ch
Description
|
With fast sampling on each channel and 10 Mpts/Ch memory the WaveSurfer MXs is an outstanding choice from 200 MHz to 1 GHz. Along with class leading specs, the WaveSurfer MXs includes a number of unique tools that simplify how you use an oscilloscope and how you perform everyday debug and validation. These tools enable searching through long captures or dynamically searching live acquisitions; easy documentation; and report generation as well as long memory that is fast and does not slow you down. In addition, the WaveSurfer MXs provides the largest set of math and measure tools available on any oscilloscope in this class.
Fast Validation and Debug The WaveSurfer MXs is designed for fast validation and debug. The big display (but small footprint), simplified front panel, and graphical touch screen provide a friendly user interface for making measurements. On top of the great feature set and easy-to-use principles of the WaveSurfer Xs the WaveSurfer MXs provides outstanding specs, advanced triggers plus great math and measurement tools. The long 10 Mpts/Ch memory guarantees you will maintain high sample rates over longer acquisitions and make sure you do not miss key aspects of your waveform.
Advanced Math and Measurement While other oscilloscopes in this class offer the basic math tools (add, subtract, multiple, divide, and FFT) the WaveSurfer MXs includes more advanced tools such as enhanced resolution, integral, derivative, summed, and continuous averaging and square root to name a few. Plus the WaveSurfer MXs computes FFTs up to 1 Mpts where other oscilloscopes have limitations. The design of the WaveSurfer MXs is not only built on great specs and features but the ability to handle math and measurements quickly. Many oscilloscopes can offer a range of triggers and functions but get bogged down with the simplest measurements statistics. The WaveSurfer MXs is designed for fast processing especially when math, measurements, and FFTs are being used.
Powerful Triggering A multitude of powerful and flexible triggers are provided to meet any need. Use an advanced SMART Trigger™ to isolate a specific event of interest, and narrow the long capture around that event. Trigger on what you expect (widths, glitches, standard or high definition video, logic patterns, etc.) and also trigger on unusual signals (dropouts,intervals, runts, slew rates). LeCroy's exclusion triggering can exclude normal signals and capture only the abnormal ones, speeding up the debug of your circuits and systems. Trigger on signals down to 1 ns in width (500 ps for width and glitch trigger). Use an "A" condition to qualify a "B" trigger. Digital triggering is provided through the MS Series Mixed Signal oscilloscope option.
Long Capture Time
Standard fast acquisition memory of 10 Mpts/Ch provides long capture time. This greatly assists in debugging common circuit problems such as clock/data issues and timing errors. Use the touch screen to quickly "draw a box" around the area of interest and zoom all channels to the desired area. Then, adjust zoom position and ratio from the front panel or the graphical touch screen user interface. WaveSurfer MXs long memory is also thoughtfully designed to respond quickly even when measurements, math, or serial decoders are being used.
WaveScan™ Advanced Search
WaveScan provides powerful isolation capabilities that hardware triggers can't provide. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search), or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition, and begin scanning. Since the scanning "modes" are not simply copies of the hardware triggers, the utility and capability is much higher. For instance, there is no "frequency" trigger in any oscilloscope, yet WaveScan allows for "frequency" to be quickly "scanned." This allows the user to accumulate a data set of unusual events that are separated by hours or days, enabling faster debugging. When used in multiple acquisitions, WaveScan builds on the traditional LeCroy strength of fast processing and will quickly scan millions of events for unusual occurrences.
LabNotebook™ – A Unique Tool for Documentation and Report Generation
The LabNotebook feature provides a report generation tool to save and document all your work. Saving all displayed waveforms, relevant settings, and screen images is all done with a single button press. Easy report generation allows you to annotate screen images and helps you share your findings and communicate important results. Reports can even be emailed directly from the oscilloscope. With the Flashback functionality LabNotebook lets you recall your settings from any report and use them to reproduce previous measurements.
WaveStream™ Fast Viewing Mode
WaveStream provides a vibrant, intensity graded (256 levels) display with a fast update to closely simulate the look and feel of an analog oscilloscope. Turn WaveStream ON or OFF, and adjust intensity, using the front panel knob. Use it only when you want to.
I2C, SPI, UART, RS-232, LIN, and CAN Trigger & Decode (Optional)
Complete I2C, SPI, UART, RS-232, LIN, and CAN serial triggering, including powerful conditional data triggering, allows quick and easy isolation of specific events on your embedded controller. Trigger on DATA in specific locations of long I2C EEPROM reads, or trigger on sensor values outside of a certain range. Intuitive, color-coded decode overlay helps you understand your serial data signals quickly. Search for data patterns, or view the protocol data in a table. Export table data to Excel®.
MS Series Mixed Signal Oscilloscope Options
Add high-performance mixed signal capability to a WaveSurfer MXs. Capture digital signals up to 500 MHz with up to 10 Mpts/Ch memory, 2 GS/s, and 18 or 36 channels.
ZS Series High Impedance Active Probes (Accessories)
LeCroy's new ZS Series of high impedance active probes provide full bandwidth at the probe tip, and the high impedance (1 MO || 0.9 pF) you want. A variety of standard and available probe tip and grounding accessories are offered to meet any requirement. What's more, ZS Series probes are available for a very affordable price. Use the ZS1000 with 200 to 600 MHz WaveSurfers and the ZS1500 with 1 GHz WaveSurfers to give full system bandwidth at the probe tip.
|
Models, Options, & Accessories
EDU models and pricing are for educational institutions only
| Model |
Description |
List Price |
Sale Price |
| 104MXs |
1 GHz, 5 GS/s, 4ch, 10 Mpts/Ch DSO with 10.4" Color Touch Screen Display - Discontinued - replaced by LeCroy 104MXs-A |
| 64MXs |
600 MHz, 2.5 GS/s, 4ch, 10 Mpts/Ch DSO with 10.4" Color Touch Screen Display. 5 GS/s interleaved - Discontinued - replaced by LeCroy 64MXs-A |
| 44MXs |
400 MHz, 2.5 GS/s, 4ch, 10 Mpts/Ch DSO with 10.4" Color Touch Screen Display - Discontinued - replaced by LeCroy 44MXs-A |
| 24MXs |
200 MHz, 2.5 GS/s, 4ch, 10 Mpts/Ch DSO with 10.4" Color Touch Screen Display - Discontinued - replaced by LeCroy 24MXs-A |
| MS-500 |
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option |
| $4275.00 |  |
|
| MS-500-36 |
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option |
| $5335.00 | |
|
| MS-250 |
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option |
| $3203.00 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| WSXs-VL |
10 Mpt/Ch Optional Memory for 4ch WSXs |
| $1607.00 | |
|
| WSXs-VL2 |
10 Mpt/Ch Optional Memory for 2ch WSXs |
| $803.00 | |
|
| WSXs-AudioBus TD |
AudioBus trigger and decode for WaveSurfer Xs |
| $1345.00 | |
|
| WSXs-I2Cbus TD |
I2C Bus Trigger and Decode Option for WSXs Oscilloscopes |
| $798.00 | |
|
| WSXs-LINbus TD |
LIN Bus Trigger & Decode Option for WaveSurfer Xs Series Oscilloscopes |
| $1385.00 | |
|
| WSXs-SPIbus TD |
SPI Bus Trigger & Decode Option for WSXs Oscilloscopes |
| $798.00 | |
|
| WSXs-UART-RS232bus TD |
UART and RS232 Bus Trigger and Decode Option for WaveSurfer Xs Oscilloscopes |
| $798.00 | |
|
| WSXs-ADVTRIG |
Advanced Trigger Package |
| $483.00 | |
|
| WSXs-ET-PMT |
Electrical Telecom Mask Test Package |
| $1602.00 | |
|
| WSXs-LOCKOUT |
Windows Lockout SW Option |
| $289.00 | |
|
| WSXs-MATHSURF |
Extended Math Package |
| $515.00 | |
|
| WSXs-CANbus TD |
CAN Bus Trigger and Decode Option |
| $2050.00 | |
|
| MS-250 |
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option |
| $3203.00 | |
|
| MS-500 |
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option |
| $4275.00 | |
|
| MS-500-36 |
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option |
| $5335.00 | |
|
| MSO-3M |
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002) |
| $663.00 | |
|
| MSO-DLS-18 |
16" Digital Lead Set, D0-D17 |
| $1010.00 | |
|
| MSO-DLS-36 |
16" Digital Lead Set, D18-D35 |
| $1010.00 | |
|
| MSO-GND-EXTEND |
Ground Extender for MS Series Digital Lead Set |
| $20.00 | |
|
| MSO-GND-LEAD |
3 in. Flexible Ground Lead for MS Series Digital Lead Set |
| $50.00 | |
|
| MSO-LBUS |
1.3 m LeCroy Bus Cable |
| $357.00 | |
|
| MSO-MICTOR |
36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD) |
| $663.00 | |
|
| PK400-1 |
Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads |
| $179.00 | |
|
| PK400-2 |
Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads |
| $291.00 | |
|
| PK400-3 |
Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads |
| $474.00 | |
|
| DA1855A |
1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source |
| $3780.00 | |
|
| WS-GPIB |
USB 2.0 to GPIB IEEE-488.2 Adapter |
| $630.00 | |
|
| WSXs-A-FP-CHNES-SI |
WSXs-A Simplified Chinese Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-CHNES-TR |
WSXs-A Traditional Chinese Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-FRENCH |
WSXs-A French Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-GERMAN |
WSXs-A German Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-ITALIAN |
WSXs-A Italian Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-JAPANESE |
WSXs-A Japanese Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-KOREAN |
WSXs-A Korean Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-RUSSIAN |
WSXs-A Russian Front Panel Overlay |
| $27.00 | |
|
| WSXs-A-FP-SPANISH |
WSXs-A Spanish Front Panel Overlay |
| $27.00 | |
|
| WSXs-KYBD |
WSXs Keyboard Accessory |
| $53.00 | |
|
| WSXs-MOUSE |
WSXs Optical Mouse Accessory |
| $53.00 | |
|
| WSXs-MS-CLAMP |
WSXs Clamp Mounting Stand |
| $415.00 | |
|
| WSXs-POUCH |
WSXs Accessory Pouch |
| $58.00 | |
|
| WSXs-HARDCASE |
WSXs Hard Carrying Case |
| $641.00 | |
|
| WSXs-RACK |
WSXs Rack Mount Accessory |
| $457.00 | |
|
| WSXs-SOFTCASE |
WSXs Soft Carrying Case |
| $242.00 | |
|
| WSXs-C5 |
Five Year NIST Cal Pkg |
| $1700.00 | |
|
| WSXs-C5/MIL |
Five Year Mil Cal Pkg |
| $2100.00 | |
|
| WSXs-CCM |
MIL STD Calibration |
| $525.00 | |
|
| WSXS-EW |
Please call or email us for pricing and availability. |
| WSXS-EW2 |
Please call or email us for pricing and availability. |
| WSXs-T5 |
Five Year Warranty & NIST Cal |
| $1900.00 | |
|
| WSXs-T5/MIL |
Five Year Warranty & MIL Cal |
| $2300.00 | |
|
| WSXs-W5 |
Five Year Warranty |
| $825.00 | |
|
| ADP300 |
1,400 V, 20 MHz High-Voltage Differential Probe |
| $883.00 | |
|
| ADP305 |
1,400 V, 100 MHz High-Voltage Differential Probe |
| $1210.00 | |
|
| AP033 |
500 MHz Differential Probe |
| $2925.00 | |
|
| AP034 |
1 GHz, Active Differential Probe (1, 10, 20) |
| $3966.00 | |
|
| HFP1000 |
1 GHz, 0.7pF Active Voltage Probe(10:1), Small Form Factor |
| $1210.00 | |
|
| HFP1500 |
Please call or email us for pricing and availability. |
| AP015 |
30 A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse |
| $2719.00 | |
|
| CP030 |
30A, 50MHz Current Probe |
| $2348.00 | |
|
| CP031 |
30A, 100MHz Current Probe |
| $3955.00 | |
|
| CP150 |
150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse |
| $3255.00 | |
|
| CP500 |
500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse |
| $3476.00 | |
|
| PPE1.2KV |
10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC |
| $310.00 | |
|
| PPE20KV |
1000:1 100 MHz 50 MOhms High-Voltage Probe 20kV Max. Volt. DC + 40kVPeak AC |
| $1875.00 | |
|
| PPE2KV |
100:1 400 MHz 50 MOhms High-Voltage Probe |
| $226.00 | |
|
| PPE4KV |
100:1 400 MHz 50 MOhms High-Voltage Probe |
| $383.00 | |
|
| PPE6KV |
1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe |
| $783.00 | |
|
| PP009-1 |
500 MHz Passive Probe for WaveSurfer Xs, 10:1, 10 MOhm |
| $205.00 | |
|
| PP011-1 |
PP011 Passive Probe |
| $196.00 | |
|
| ZS1000 |
1 GHz, .9 pF, 1 MOhm Active Voltage Probe |
| $525.00 | |
|
| ZS1000-QUADPAK |
Set of 4 ZS1000, 1 GHz High Impedance Active Probes |
| $1573.00 | |
|
| ZS1500 |
1.5 GHz, .9 pF, 1 MOhm Active Voltage Probe |
| $1313.00 | |
|
| ZS1500-QUADPAK |
Set of 4 ZS1500, 1.5 GHz High Impedance Active Probes |
| $3940.00 | |
|
Specifications
| Main Specifications |
24MXs |
44MXs |
64MXs |
104MXs |
| Bandwidth (@ 50 Ω) |
200 MHz |
400 MHz |
600 MHz |
1 GHz |
| Rise Time |
1.75 ns |
875 ps |
500 ps |
300 ps |
| Input Channels |
4 |
4 |
4 |
4 |
| Display |
10.4" Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen |
Sample Rate
(single-shot) |
2.5 GS/s |
2.5 GS/s (5 GS/sinterleaved) |
5 GS/s |
| Sample Rate (RIS mode) |
50 GS/s |
| Standard Record Length |
10 Mpts/Ch (all channels) |
| Standard Capture Time |
up to 4 ms at 2.5 GS/s |
| Vertical Resolution |
8-bits |
| Vertical Sensitivity (V/div) |
2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω) |
| Vertical (DC Gain) Accuracy |
±1.0% of full scale (typical); ±1.5% of full scale = 10 mV/div (warranted) |
| BW Limit |
20 MHz |
20 MHz, 200 MHz |
| Maximum Input Voltage |
50 Ω: 5 Vrms, 1 MO: 400 V max. (DC + Peak AC = 5 kHz) |
50 Ω: 5 Vrms 1 MO: 250 V max. (DC + Peak AC = 10 kHz) |
| Input Coupling |
AC, DC, GND (DC and GND for 50 Ω) |
| Input Impedance |
1 MΩ || 16 pF, or 50 Ω |
1 MΩ || 20 pF, or 50 Ω |
| Probing System |
BNC or ProBus |
| Probes |
One passive probe per channel (standard) |
| Timebase Range |
200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div) |
| Timebase Accuracy |
<= 5 ppm @ 25 °C (typical) (= 10 ppm @ 5–40 °C) |
| Trigger Modes |
Normal, Auto, Single, and Stop |
| Trigger Sources |
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger) |
| Trigger Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of full scale |
| Post-trigger Delay |
0–10,000 divisions |
| Trigger Hold-off |
1 ns to 20 s or 1 to 1,000,000,000 events |
| Internal Trigger Level Range |
±4.1 div from center |
| External Trigger Range |
EXT/10 ±4V; EXT ±400 mV |
| Triggering |
| Trigger Types (standard) |
Edge, Glitch, Width, Logic (Pattern), Video (NTSC, PAL, SECAM, HDTV - 720p, 1080i, 1080p), Runt, Slew Rate, Interval (Signal or Pattern), Dropout, Qualified (State or Edge) |
| Measure, Zoom, and Math Tools |
| Standard Parameter Measurements |
Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Delay, Duty, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew, Standard Deviation, Top (High), Width+, Width-. Measurements can be gated. |
| Zooming |
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area. |
| Standard Math |
Operators include Sum, Difference, Product, Ratio, and FFT (up to 25 kpts with power spectrum output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time. |
|
;)
;)
;)
;)
;)
;)
;)
;)
