|
LEM Analyst 2060 AC/DC True RMS Clamp-on Power Quality Meter
Click image to enlarge
LEM Analyst 2060
|
|
Features:
- Commissioning and maintaining variable speed drives
- Installing and testing of dc power systems
- Measurement of harmonics voltage and current on industrial systems
- Quick data evaluation with large bright display for waveform, chart and multi-parameter display
- Immediate harmonics analysis with ‘live’ bargraph display (to 25th)
- Check for problems at the service entrance with CAT IV 600 V safety rating
- Trend measurements by internal data logging of up to 5 parameters for 24 hours
- True RMS voltage, current, and power on ac and dc current measurement up to 2000 A
- Comprehensive range of measurement parameters including V, A, Hz, Crest Factor,THD, DF, W, VA, VAR, kWh and Power Factor even for distorted waveforms
- Monitor the effects of loads with dc Ripple measurement
- Quick reporting with 8 data set memory and time stamped min, max, average recording
- Flexible applications with three-phase power capability for balanced loads.
- Analyze data and generate reports with Optional WinLog software
Advantages:
- Current clamp, power quality meter, oscilloscope and data logger in one instrument
- Large backlit display for waveform, chart and multi parameter display
- AC/DC True RMS measurements
- Enhanced EMC performance for power electronics applications
Includes:
- Batteries
- Pair of measuring leads
- Alligator clips
- Operating instructions
- Pouch and calibration certificate
|
Description
The Analyst 2060 Power Quality Clamp Meter for today’s electrical environment.
The ideal measurement tool for monitoring and troubleshooting in the modern ‘noisy’ electrical environment typically found with switching loads such as drives and high efficiency lighting. The Analyst 2060 combines the functionality of a current clamp, power quality meter, oscilloscope and data logger in a single handheld instrument that has been designed for safety and ease of use.
LOGGING
Data can be stored as Saved Screens or logged values. All parameters shown on the screen are logged simultaneously.
Stored readings can be recalled and displayed on-screen in normal screen format or in the case of logged data as a chart.
All saved data can be downloaded to a PC including waveforms for harmonics analysis using optional WinLog software. WinLog also allows direct logging to a PC of waveforms,
harmonics and up to 5 measured parameters.
Memory Size
Analyst 2050: 8 Screens and up to 5000 readings Analyst 2060: 8 Screen Smart Save and up to 10000 readings.
Waveforms and Harmonics
The auto-ranging scope function has ranges from 10A to 2000A and 4V to 1000V for the display of current and voltage
waveforms.
The time-base is selectable from 2ms/div to 50ms/div.
Refresh rate 0.5 seconds.
Max sampling rate 9.6 kHz
The Analyst 2060 allows the harmonic content of current and
voltage waveforms to be displayed up to the 25th harmonic, in
bargraph format, together with individual values and THD/DF.
Fundamental frequency range F0 - 45Hz to 65Hz.
Software
WinLog is an easy to use PC software and interface package for data logging applications with the LEM Power Clamps and HEME ISO Series insulation testers. The software can be used to continually log the electrical measurement displayed on the instrument or to download stored data from the Analyst and ISO2000 to a PC for further analysis.
- Easy to use Windows format allowing the display of multiple parameters in instrument mimic, table and chart formats.
- Simultaneous logging of multiple parameters
- Waveform and stored data download from the Analyst
- Harmonics analysis of waveforms with the Analyst and LH1060 Simple data export to other applications
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| ANALYST 2060 |
AC/DC TRMS 2000A POWER Q CLAMP |
$1195.00 |
| $1135.25 |  |
|
| ANALYST 2050 |
AC/DC TRMS 2000A POWER CLAMP - Discontinued - no replacement |
| Model |
Accessories |
List Price |
Sale Price |
| EP0329Z |
Please call or email us for pricing and availability. |
| WINLOG S/W |
60.98.69.010.0, PC SW + CBL LH1050/60, AN2050/60 - Discontinued - no replacement |
Specifications
| Power Supply |
| Battery Type |
6xAA Alkaline MN1500, LR6 |
| Battery Life |
Typically 24hrs. (Backlight off) |
| Mechanical Data |
| Dimensions (H x W x D) |
300 x 98 x 52 mm
12 x 3.75 x 2 inches |
| Weight |
750 gm / 1.65 lbs |
| Jaw Capacity |
60 mm diameter |
| Jaw Opening |
62 mm |
| Environmental Data |
| Operating Temperature |
0 °C to 50 °C (32 °F to 122 °F) |
| Temperature Coefficient |
± 0.1 % of reading per °C
(Current) ± 0.06 % of reading per °F |
| Storage Temperature |
-20° to 60° (-4 °F to 140 °F) |
| Safety |
All models comply with IEC1010-1, 600V working, Installation category lV, (750V Cat III) Pollution degree 2. |
| Maximum Safe Voltages |
| Current measurement |
600V AC RMS or DC between
(bare conductors) uninsulated conductor & ground |
| Voltage measurement |
600V AC RMS or DC between input terminals or between live terminal & local ground. |
|
;)
