Our agents are available:
9:00 AM - 6:00 PM EST
Kenwood V-1310V1 NTSC/PAL Video Signal Analyzer
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   

   
   

Kenwood V-1310V1 NTSC/PAL Video Signal Analyzer


Kenwood V-1310V1
Click image to enlarge

 Kenwood V-1310V1

Features:
  • Compatible with both NTSC/PAL
  • High measurement accuracy of ±1% of full scale
  • Versatile measuring modes
    -Luminance Level, Chrominance level, Chrominance phase, Sync level, Burst level, Peak ( peak, -peak, p-p), DG, DP,
    Luminance S/N (V-1310V1 only), Chrominance S/N (V-1310V1 only)
  • Frequency characteristic measurement
    Frequency characteristic can be measured by calculating the function in the p-p measurement of the multi-burst and sweep signals.
  • Y/B-Y/R-Y color difference component signal inputs are provided as standard
    -In addition to the Y/C separate inputs and the G/B/R component signal inputs, Y/B-Y/R-Y color difference component signal inputs are provided as standard.
  • 320 x 240 dot large sized LED display Versatile computations
    -The calculation features include the maximum, minimum, average and the ratio between two points.
  • Monitor output with measurement point cursors
    -The measurement area is output with the cursor in addition to the input signal, thereby making it possible to confirm the measurement area on the TV monitor.
  • Automatic set-up of the measurement points
    -The measurement area is detected automatically, when the measurement area cannot be time set.
  • 100 sequence memory
    -100-sequence memory can be divided into 10 groups.
  • GO/NO-GO Judgment
  • Noise Measurement (V-1310V1 only)
    -Luminance noise and Chromminance noise can be measured.
  • GP-IB is provided as standard


  Description

NTSC/PAL Video Signal Analyzer


  Models, Options, & Accessories


Model Description List Price Sale Price
V-1310V1 NTSC/PAL Video Signal Analyzer w/noise measurement $24248.00
$21823.20 


  Specifications

Items Specifications Conditions / Remarks
Inputs
Color system NTSC/PAL  
Signal format Composite video signals‚ Y/C separate signals‚ G/B/R component signals‚ 
Y/B - Y/R - Y color difference component signals		  
Input terminals Composite video signals (Front: 1‚ rear: 1) 
Y/C separate signals (Rear: 1 set)‚ G/B/R component signals (Rear: 1 set)  Y/B-Y/R-Y color difference component signals (Rear: 1 set) 
External sync. signals (Rear: 1 set)		 Loop Through 75Ω‚ With ON/OFF switch 1V/4V external sync. selectable 
Measurement Items
Level Luminance‚ Chrominance‚ Burst‚ Sync. (Horizontal sync.)‚ DG  
Phase Chrominance‚ DP‚ Burst (PAL only)  
Peak Peak-to-peak‚ peak‚ - peak  
Measurement Accuracy
Video level / Phase ±1% of full scale or less / ±2° or less  
Peak ±5% of full scale or less  
Synchronization
Type Internal synchronization‚ External synchronization  
Synchronization level 0.15 to 0.6 V (Sync. level)  
Color burst 3.579545 MHz ±150 Hz (NTSC)‚ 4.43361875 MHz ±150 Hz (PAL)  
External sync. 1 V / 4 V selectable   
Measurement Area
Setting resolution 0.1 µsec (horizontal)‚ 1 line (vertical)  
Calculation Functions
Average Off‚ 2‚ 4‚ 8‚ 16‚ 32‚ 64 / both fields‚ odd field‚ even field  
Type of calculation Average‚ maximum‚ minimum‚ maximum- minimum‚ ratio between 2 points‚ 
difference between 2 points		  
Others Ratio of sync. and luminance‚ ratio of burst and chrominance  
Outputs
Monitor output Measurement marker is inserted. (200 mV is added to input signals.)   
Preset
Number of steps 100 (0 to 99)  
Data Mode (NTSC / PAL)‚ measurement conditions (input terminals‚ internal/external synchronization‚ measurement interval‚ input range‚ average‚ limit‚ external I/O)  
External Control I/O's
Functions Sequential memory recall (Up/down)‚ Direct memory recall‚ External control output (8 bits × 2)‚ External data reading (8 bits × 1)‚ Limit judgment output 
Automatic sequence start & stop‚ Automatic sequence limit judgment output 		  
Others
GP-IB functions Panel status‚ Measured value output‚ Memory dump function‚ 
Memory synchronization function		  
Prints out functions Measured data‚ memory list  Centronics Standards.
Dimensions & weight W × H × D = 426 (426) × 133 (148) × 485 (506) mm‚ approx. 15 kg  
Power source 100/120/220/230 VAC ±10%‚ 50/60 Hz‚ 40 W (MAX.)   
Specification-guaranteed range 10°C to 35°C‚ 85% RH or less (without condensation)   
Operation-guaranteed range 0°C to 50°C‚ 85% RH or less (without condensation)  
SPECIFICATIONS (V-1310V1 Only)
Noises measurement 
S/N Luminance noises‚ Chrominance AM noises‚ Chrominance PM noises  
Measurement range 8 to 80 dB (Luminance noises)‚ 18 to 70 dB (Chroma noises)   
Measurement area H/2  
Correction (ILC) 50% white (NTSC: 357 mV‚ PAL: 350 mV)‚ 100% white (NTSC: 714 mV‚ PAL: 700 mV) Luminance Noises
HPF 
LPF 
Others 		 100Hz‚ 1kHz‚ 10kHz‚ 100kHz‚ 200kHz
500kHz‚ 1MHz‚ 3MHz‚ 4.2MHz‚ 5MHz‚ OFF (Through)
fsc trap‚ weighting (CCIR 567) 
Sag Horizontal‚ Vertical 
Correction (ILC) Red (NTSC: 626 mV‚ PAL: 664 mV)‚ 100% chroma (NTSC: 714 mV‚ PAL: 700 mV) Chrominance AM noises
Chrominance PM noises
fsc sync.range 3.579545 MHz ±150 Hz (NTSC)‚ 4.43361875 MHz ±150 Hz (PAL) 
HPF
LPF 		 100Hz‚ 1kHz‚ 10kHz‚ 100kHz‚ 200kHz
500kHz‚ 1MHz


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET