Kenwood PEL601-201V1 DC Electronic Load Kenwood PEL601-201V1 PEL601 201V1 PEL601201V1

Kenwood PEL601-201V1 DC Electronic Load

Search:

Kenwood PEL601-201V1 DC Electronic Load

Click image to enlarge

Kenwood PEL601-201V1

Features:

Max. Input Voltage: 200V
Max. Input Power: 150W
Max. Input Current: 30A
High-speed response
SW(switching) operation is available in the CC or CR discharging mode. It features the maximum response of 10µs (in the CC discharging mode).
100 sequence memory
Storing on panel in the memory facilitates easy sequence operation.
External control
Every model allows analog control according to external voltage (0 to 10V) and external resistance (0 to 10kOhm).
GP-IB interface
Every model has the general purpose interface bus GP-IB as the standard feature.
Master slave parallel operation
A maximum of five units can be connected in the parallel master slave operation mode.
Various protective functions
Three protective functions are available: UVP (Under Voltage Protection), OCP (Over Current Protection) and OPP (Over Power Protection). Six alarm functions are available: RCP (Reverse Connection Protection) alarm, OPP (Over Power Protection) alarm, OVP (Over Voltage Protection) alarm, OCP (Over Current Protection alarm, OHP (Over Heat Protection) alarm and UVP (Under Voltage Protection) alarm.
Software start function
The current rise time of the load side can be adjusted according to the rise time of the output voltage, when test the rise time of switching power supply.

Description

The PEL series are DC electronic loads which are ideal in aging‚characteristic analysis and product life testing applications including switching power supplies and batteries. A sophisticated program function enables high speed response and load characteristic simulation. A minimum operating voltage down to 0V is a standard feature of the V1 versions. The maximum application voltage is 200V or 500V, the input power is 150, 300, 600 or 1000W. The input current is 30A for 150W, 60A for 300W, 120A for 600W or 200A for 1000W.

Models, Options, & Accessories

Model

Description

List Price

Sale Price

PEL601-201V1

600W /120A / 200V, Minimum 0 Volt Operating Model

$5718.00

$5146.20

Specifications

Model		PEL151-501	PEL301-501	PEL601-501	PEL102-501
Input Power		0 to 150 W	0 to 300 W	0 to 600 W	0 to 1000 W
Input Voltage Range		CR Mode:0 to 500V, CC/CP/CV Mode:5 to 500V
Input Current Range(Front/Rear Terminal)		0 to 7.5 A / 0 to 7.5 A	0 to 15 A / 0 to 15 A	0 to 30 A / 0 to 30 A	0 to 30 A / 0 to 50 A
Constant Current Mode	Range/Resolution	H Range: 7.5 A: 0 to 7.5 A / 1 mA / 150 W max L Range: 75 mA: 0 to 75 mA / 2.5 µA / 15 W max	H Range: 15 A: 0 to 15 A / 2 mA / 300 W max L Range: 150 mA: 0 to 150 mA / 5 µA / 3 W max	H Range: 30 A: 0 to 30 A / 4 mA / 600 W max L Range: 300 mA: 0 to 300 mA / 10 µA / 6 W max	H Range: 50 A: 0 to 50 A / 5 mA / 1000 W max L Range: 500 mA: 0 to 500 mA / 20 µA / 10 W max
	Accuracy	±0.2% of SET ±0.3% of FS (0 to 40°C)
	Ripple Noise (1MHz)	H Range 3 mA rms / L Range 0.5 mA rms	H Range: 5 mA rms / L Range: 0.5 mA rms	H Range: 5 mA rms / L Range: 0.5 mA rms	H Range: 10 mA rms / L Range: 1 mA rms
	Stability	±0.1% of FS (typ)
Constant Resistance Mode	Range	H Range: OPEN, 20k Ohm to 0.6667m Ohm L Range: OPEN, 2M Ohm to 66.67 Ohm	H Range: OPEN, 10k Ohm to 0.3333 Ohm L Range: OPEN, 1 M Ohm to 33.33 Ohm	H Range: OPEN, 5 k Ohm to 166.67 m Ohm L Range: OPEN, 500 k Ohm to 16.667 Ohm	H Range: OPEN, 3.3333k Ohm to 111.11 m Ohm L Range: OPEN, 333 k Ohm to 11.111 Ohm
	Resolution	H Range: 50 µs / L Range:0.5 µs	H Range: 100 µs / L Range: 1 µs	H Range: 200 µs / L Range: 2 µs	H Range: 300 µs / L Range: 3 µs
	Accuracy (23°C ±5°C)	H Range: ±0.5% of SET ±37.5 mA Vin/Rin L Range: ±0.5% of SET ±0.375 mA Vin/Rin	H Range: ±0.5% of SET ±75 mA Vin/Rin L Range: ±0.5% of SET ±0.75 mA Vin/Rin	H Range: ±0.5% of SET ±0.25 A Vin/Rin L Range: ±0.5% of SET ±1.5 mA Vin/Rin	H Range: ±0.5% of SET ±0.25 A Vin/Rin L Range: ±0.5% of SET ±2.5 mA Vin/Rin
	Ripple Noise (1MHz)	H Range: 3 mA rms / L Range: 0.5 mA rms	H Range: 5 mA rms / L Range: 0.5 mA rms	H Range: 5 mA rms / L Range: 0.5 mA rms	H Range: 10 mA rms / L Range: 1 mA rms
	Temperature Factor	1000PPM/°C (Vin=20 V)
Constant Voltage Mode	50V Range/500V Range	5 to 50 V/40 to 500 V (CC CV Mode, CR CV Mode)
Constant Voltage Mode	Accuracy/Resolution/Minimum Operating Current	±0.1% of SET ±0.1% of FS (0 to 40°C) / 50 V Range: 1 mV, 500 V Range: 10m V / 1% of Constant Current
Constant Power Mode	Operating Range/Resolution	H Range: 1.5 to 150 W / 5 m W L Range: 0.03 to 1.5 W / 50 µW	H Range: 3 to 300 W / 10 mW L Range: 0.06 to 3 W / 100 µW	H Range: 6 to 600 W / 20m W L Range: 0.12 to 6 W / 200 µW	H Range: 10 to 1000 W / 25 mW L Range: 0.2 to 10 W / 250 µW
	Accuracy (23°C ±5°C)	±0.4% SET ±1.6% FS ±Vin x Vin / Rin (Vin x Vin / Rin for Current L Range) (TEMP factor: 1000PPM/ °C (Vin=20 V))
	Ripple Noise (1MHz)	H Range : 3 mA rms / L Range : 0.5 mA rms	H Range: 5 mA rms / L Range: 0.5 mA rms	H Range : 5 mA rms / L Range : 0.5 mA rms	H Range : 10 mA rms / L Range : 1 mA rms
Short Mode	Setting Current Value	0.075/7.5 A	0.15/15 A	0.3/30 A	0.5/50 A
SW Mode (Preset A,B)	Frequency/Accuracy	1 Hz to 10kHz / ±1.5% SET
SW Mode (Preset A,B)	DUTY/Setting Accuracy/Resolution	5% to 95% / ±1.5% of SET / 1% STEP
Through Rate Tr/Tf	Operating Mode	CC, CR
	Setting Range	CC:10 / 20 / 50 / 100 / 200 / 500 / 1000 / 2000µs, CR:OFF / 200 / 500 / 1000 / 2000µs
	Setting Accuracy	H : 10, 20µs :-5µ s : ±10µs, L:10, 20µ s : ±10µs, H : 50 to 2000µs : ±20 %, L : 50 to 2000µs : ±30 %
Soft Start	Operating Mode	CC
	Setting Range/Accuracy	0.1 / 1 / 2 / 5 / 10 / 20 / 50 / 100ms / ±30 % of set 100µs
Remote Sensing		2.5 V par One Way
External Control	Voltage	0 to 10 V (Offset gain Adjustable at Rear Panel. ) It takes approx. 1 Second for Settings at CR Mode
	Resistance	0 to 10k Ohm (It takes approx. 1 Second for Settings)
	Others	LOAD ON/OFF, EXT SW
Series/Parallel (Master/Slave Operation)	Connecting Capability	Maximum 4 of Slave Units plus 1 Master Unit
	Added Current Display	Total Value of Slave Unit(s) and Master Unit are Displayed at Master Unit Display. Over Write : 2 times/Sec
	Resolution (L Range/H Range)	2 x N (mA) N: Parallel Unit Numbers.
Current Monitor Out	Linearity	±1% FS
DC Current Measurement	Range/ (Resolution)	0.075 / 7.5 A / (0.02 mA/2 mA)	0.15/15 A/(0.02 mA/2 mA)	0.3 / 30 A / (0.02 mA/2 mA)	0.5/50 A / (0.02 mA/2 mA)
DC Current Measurement	Accuracy/Repeat	±0.2% of rdg ±0.3% of FS (0 to 40°C) / 2 Times/Sec
DC Voltage Measurement	Range/Resolution	0 to 50 V/1 mV, 40 to 525 V/10 mV (Auto Range, Hysteresis at 40/50 V)
DC Voltage Measurement	Accuracy/Repeat/Temperature Factor	50 V Range : ±0.03 % of rdg ±0.06% of FS, 500 V Range : ±0.03% of rdg ±0.03% of FS (18 to 28 °C) / 2 Times/Sec / ±0.003 % of rdg ±0.003 % of FS/ °C
Power Measurement	Range/Resolution	1.5, 150 W / 1, 100 mW (Voltage x Current)	3, 300 W / 1, 100 mW (Voltage x Current)	6, 600 W / 1, 100 mW (Voltage x Current)	10, 1000 W / 1, 100 mW (Voltage x Current)
UVP (Under Voltage )	Range/Resolution	OFF, -0.5 to 50 V/100 mV
OPP (Over Power)	Range/Resolution	H Range: 15 to 165W/1W / L Range: 0.15 to 1.65W/10mW	H Range: 30 to 330W/2W / L Range: 0.3 to 3.3W/20mW	H Range: 60 to 660 W/4 W / L Range: 0.6 to 6.6 W/40 mW	H Range: 100 to 1100 W/5 W, L Range: 1 to 11 W/50 mW
OCP (Over Current)	Setting Range/Resolution	H Range: 0.75 to 8.25 A/37.5 mA L Range: 7.5 to 82.5 A/0.375 mA	H Range: 1.5 to 16.5 A/75 mA L Range: 15 to 165 mA/0.75 mA	H Range: 3 to 33 A/150 mA L Range: 0.03 to 0.33 A/1.5 mA	H Range: 5 to 55 A/250 mA L Range: 0.05 to 0.55 A/2.5 mA
Protection	Over Voltage	Cut Load Off about 575 V
	Over Current, Over Power	Automatic Resume After 3 Sec of Load Off
	Reversed Connection	Terminate by Parasitic FET
	Over Heating	Cut Load Off at 110 °C at Inside Heat Sink
Sequence Memory	Step/Time/Resolution	100 / 50 µs to 99h59m59.99995 s, PAUSE, PASS / 50 µs, Cycle: 1 to 255
Sequence Memory	Items	Discharge Mode Pre-set A, B and C Value, Pre-set A, B and C Switch Selection, Discharge Mode, SHORT Mode ON/OFF, LOAD ON/OFF, UVP Setting value, OCP Setting value, OPP Setting Value, Soft Start Setting Value, Tr/Tf Setting value, SW Frequency, SW DUTY, CV RANGE, Current RANGE, External Control Mode (PASS at Auto Sequence Mode)
Environmental Request	Temperature/Humidity	0 to 40°C / 20 to 85 %RH
	Power Source	AC90 to 132 V / AC180 to 250V, 48 to 63 Hz
	Power Consumption	Less than 120 VA	Less Than 130VA	Less than 147VA	Less Than 169VA
	Isolation	Primary to Body : 1500VAC 1 Minute, Primary to Secondary : 2300VAC 1 Minute
	Isolation Resistance	Primary to Body, Primary to Secondary : 500VDC More Than 10M Ohm, Secondary to Body : 500 VDC More Than 5M Ohm
	Cooling Method	Cooling Fan
	Dimensions (Maximum)	W x H x D: 210 (210) x 124 (141) x 405 (538) (mm)		W x H x D: 421.5 (421.5) x 124 (132.5) x 405 (538) (mm)
	Weight	Approx. 6 kg	Approx. 7 kg	Approx. 11 kg	Approx. 13 kg

Kenwood
Main Page

Kenwood
DC Electronic Loads

Kenwood
Price List

	Tequipment.NET 205 Westwood Ave Long Branch, NJ 07740 For our Electronic Whiteboard division visit www.touchboards.com		Tequipment.NET Phone: 1-877-742-TEST (8378) / 732-222-7077 Fax: (732) 222-7088 E-mail: salesteam@Tequipment.NET