Kenwood CS-5400 Oscilloscope 100MHz 3-Channel Kenwood CS-5400 CS 5400 CS5400

Kenwood CS-5400 100MHz 3-Channel Oscilloscope

Search:

Kenwood CS-5400 100MHz 3-Channel Oscilloscope

Click image to enlarge

Kenwood CS-5400

Specifications

Features:

Parameter Auto Measurement Function
Auto Setup Function(CS-5400/5450)
Cursor Measurement Function(CS-5400/5450)
Peak to Peak Voltage Measurement(CS-5400/5450)
Variable Lock(CS-5400/5450)
3-Channel 8-Trace Waveform Display
High-Sensitivity Design with Vertical Axis of 1 mV/div
Automaticv Sync (FIX) Function
Easy Operation Panel Layout
Delayed Sweep with Waveform Partial Magnification Capability
V Mode Sync for Stable Display of 3 Signals
High-Accuracy ± 2% Design for More Precision Measurement
Maximum Sweep Rate of 5 ns/div (x10 MAG)
Built in Video Clamp Circuit for Easy Operation
Square-Type 150 mm CRT with Self-Illuminated Light and Inside Scale (12 kV)
Single Sweep for Observations of Single-shot Channel
Variable Hold-off Allowing Observation of Waveforms with Complicated Cycle
High-Accuracy Calibration Signals
CH1 Signal Output Connector
Wide Dynamic Range and Distortion-Free Accurate Waveform Display

Description

The CS-5400 Series are 3-channel oscilloscopes developed with concepts of high level design‚high accuracy and easy operation. The panel layout never diminishes the intuitive and high-speed response provide fatigue free operation even after long-hours of use. These models incorporating readout function (with CS-5400 / 5450) offer you parameter measurement and auto setup functions enabling to measure AC voltage (Vp-p) ‚ DCvoltage‚frequency and period. All of these models are provided with full features including ±2% high-accuracy measurement‚delay sweep function‚automatic triggering and high intensity‚high-resolution CRT. The CS-5400 Series with high-performance will surely assist you in many kinds of field activities.

Parameter Auto Measurement Function
It is possible to measure the voltage, frequency and period automatically just input the signal. Especially for voltage measurement, measurement mode is automatically selected according to the input selector. For example, when the AC input is selected, "Peak-to-Peak" voltage is automatically measured, and when the DC input is selected, DC voltage is measured automatically.

Auto Setup Function(CS-5400/5450)
By pressing the AUTO SET key, the voltage range and time range are selected automatically.

Cursor Measurement Function(CS-5400/5450)
The cursor measurement function allows a high accuracy measurement of signal values. When the probes are used, its attenuation ratio can be converted automatically. It is also possible to measure the voltage value and phase differences. When the delay sweep is used, the delay time is also displayed, enabling an accurate measurement results without any errors due to visual checks in conventional systems.

Peak to Peak Voltage Measurement(CS-5400/5450)
Parameter automatic measurement function enables automatic AC peak to peak voltage measurement up to 5MHz.

Variable Lock(CS-5400/5450)
ON/OFF the vertical and horizontal variable functions can be set when pressing the ALT/CHOP knob more than 1-second. When OFF is selected, it becomes CAL level. When the function is ON, it returns to prior value.

3-Channel 8-Trace Waveform Display
CS-5400 series enable the display of CH3 input in addition to CH1 and CH2. These three input signals to CH1, CH2 and CH3 can be displayed at the same time as the main (A) sweep waveform.Furthermore, an alternated delay sweep function displayed as the delayed (B) sweep waveforms of each signal.

High-Sensitivity Design with Vertical Axis of 1 mV/div
The vertical axis sensitivity can be varied continuously from 1 mV/div. to 5 V/div. using the 1-2-5 step attenuator. The 1 mV/div. position is very useful to measure low-level and complicated signals. (Frequency response at 1 mV/div. and 2mV/div are DC to 20 MHz (-3 dB)).

Automaticv Sync (FIX) Function
With this function, the synchronization level is automatically controlled by tracking the amplitude of the waveform to maintain the sync lock status. This function eliminates annoying and complicated synchronization operations.

Easy Operation Panel Layout
The CS-5400 and CS-5450 used touch switches and LEDs. The CS-5405 and CS-5455 used push switches and lever switches for easy operation.

Delayed Sweep with Waveform Partial Magnification Capability
The main (A) sweep waveform in which the magnified section is brightened by intensity modulation and the delayed (B) sweep waveform which shows only the magnified section can be observed simultaneously. This is a real alternate delayed sweep.

V Mode Sync for Stable Display of 3 Signals
Even when the CH1, CH2 and CH3 input signal frequencies are different, each signal can be synchronized securely and its waveform can be displayed stably.

High-Accuracy ± 2% Design for More Precision Measurement
In order to obtain highly reliable measurement results, the vertical axis sensitivity and sweep time for the main circuit is maintained within ± 2% precision. Other specifications also guarantees the rated values (under temperature conditions of 10 to 35?C, humidity of 85% or less).

Maximum Sweep Rate of 5 ns/div (x10 MAG)
The sweep rate can be varied continually from 0.5 s/div to 50 ns/div. The signal delay line is installed so that the positive rise of high-speed signals and high-frequency signals can be measured accurately

Built in Video Clamp Circuit for Easy Operation
Built in Video Clamp function which enables observation of the flame and line TV signals at the touch of a button, while high-stability synchronization is obtained without performing annoying synchronizing operations.

Square-Type 150 mm CRT with Self-Illuminated Light and Inside Scale (12 kV)
A large-sized, square, dome-mesh type CRT with accelerator is employed. It features both high intensity and high resolution while providing accurate measurements without parallax view. The auto focus circuit is also incorporated to display sharp waveforms at all times.

Single Sweep for Observations of Single-shot Channel
The single sweep function is powerful in measurement of single-shot or sudden channel. Waveform photography using a camera is as easy as ordinary, visual observations. It is easy not only for observations during normal visual inspections but also for camera shots of the waveforms.

Variable Hold-off Allowing Observation of Waveforms with Complicated Cycle
Signals which are hard to be synchronized due to complicated repetition cycles, for example digital signals and video bursts signal, can be synchronized stably by converting them into the hold-off time.

High-Accuracy Calibration Signals
A calibration signal output is provided to output the highly accurate frequency of ± 0.1% and voltage accuracy of ± 1%, enabling checking of the measurement precision at any required time.

CH1 Signal Output Connector
The CH1 signal output is obtained by branching the input signal in the middle of the signal line. As this connector outputs the input signal at a rate of 50 mV/div, connecting a frequency counter makes it possible to measure the frequency of a very low signal while observing its waveform

Wide Dynamic Range and Distortion-Free Accurate Waveform Display
Its wide dynamic range having greater margins assures the linearity of the waveforms displayed on the CRT, providing highly accurate waveform displays without any distortion up to the upper frequency limits.

Other Features
All position knobs and controls are provided on the front panel.
A High-sensitivity X-Y function is convenient for the measurement of phase differences between two input signals.
A Trace Rotation function allows an easy correction of the inclination of the trace line due to earth magnetism.
LINE Synchronization is provided
A Trace Separation function shifts the B sweep waveform upward or downward by 4 div. from A sweep waveform.
The waveform to which the brightness modulation is applied can also be observed.
Added or extracted waveforms using ADD and CH2 INV functions can also be observed.
Scale illumination convenient for taking photographs or observation in dark areas is provided.
CRT scale also provides 0, 10, 90 and 100% indications; convenient for measurement of rising time, etc.
A 10-times sweep waveform magnification function (X10 MAG) is provided.

Models, Options, & Accessories

Model

Description

List Price

Sale Price

CS-5400

100 MHz/1mV, 3CH/6-Trace, R/O, B-Sweep, Auto Setup

$2180.00

$1962.00

Model

Accessories

List Price

Sale Price

PC-51

150MHz Attenuator Probe, x10, w/readout pin

$90.00

$81.00

Specifications

CRT Type/accelerating voltage

150mm rectangular with internal graticule 8 × 10 div. (1div.=10mm) /approx. 12 kV

Vertical Axis (CH1, CH2)

Sensitivity

5 mV to 5 V/div.

± 2%

1 mV, 2 mV/div.

± 5%

Attenuator

1-2-5 step, 12 ranges, fine adjustable within the selected range

Input Impedance

1 MΩ ± 1%, approx. 20 pF

Frequency　 Response

5 mV to 5 V/div.

DC: DC to 100 MHz (within -3 dB)
AC: 5 Hz to 100 MHz (within -3 dB)

1 mV, 2 mV/div.

DC: DC to 20 MHz (within -3 dB)
AC: 5 Hz to 20 MHz (within -3 dB)

Rising Time

5 mV to 5 V/div.

approx. 3.5 ns

1 mV, 2 mV/div.

approx. 17.5 ns

Signal Delay Time

Leading edge can be confirmed using a square wave that has a rising time of less than this unit

Crosstalk

-40 dB (at 1 kHz)

Max. Input Voltage

800 Vp-p or 400 V (DC AC peak, 1 kHz)

Vertical Axis (CH3)

Sensitivity

0.1 V, 0.5 V/div. ± 2%

Attenuator

0.1 V, 0.5 V/div

Input Impedance

1 MΩ ± 1%, approx. 20 pF

Frequency Response

DC to 100 MHz (within -3 dB)

Rising Time

Approx. 3.5 ns

Signal Delay Time

Leading edge can be confirmed using a square wave that has a rising time of less than this unit

Max. Input Voltage

100 Vp-p or 50 V (DC AC peak, 1 kHz)

Vertical Axis

Operation Mode

CH1, CH2, CH3, ADD, ALT, CHOP

Chopping Frequency

Approx. 250 kHz

Polarity Inversion

CH2 only

Horizontal (CH2 Input, except × 10 MAG)

Sensitivity

5 mV to 5 V/div.

± 3%

　1 mV, 2 mV/div.

± 5%

Input Impedance

Same as vertical axis (CH2)

Frequency Response

DC to 1 MHz ( -3 dB)

5 Hz to 1 MHz ( -3 dB)

X-Y Phase Difference

Less than 3° at 100 kHz

Operation Mode

Switchable to X-Y mode with H.MODE key (CH1: Y axis, CH2: X axis)

Max. Input Voltage

Same as vertical axis (CH2)

Sweep

Sweep Mode

A, ALT, B, X-Y

Sweep Time

A Sweep

0.5 s to 50 ns/div. ± 2%, 1-2-5 step, 22 ranges, fine adjustable within the selected range

B Sweep

50 ms to 50 ns/div. ± 2%, 1-2-5 step, 19 ranges

Sweep Magnification

× 10 ± 5%, (± 8% at 0.5 µs, 0.1 µs and 50 ns/div. )

Linearity

± 3% (± 5% at × 10 MAG mode)

Hold Off

A Sweep, continuously variable from NORM position

Trace Separation

B Sweep is continuously variable ± 4 div. with respect to A sweep

Delay Sweep Mode

AFT.D

Continuous delay (After Delay)

B TRG'D

Synchronous delay (B TRIG'D): Synchronized with trigger signal

Delay Time

Continuously variable from 0.2 div. to 10 div. (0.5s/div. to 50ns/div.)

Delay Time Error

± (3% of setting value 1% of full scale) (0 to 300 ns) : CS-5400, CS-5450 ± 4% of reading value : CS-5405, CS5455

Delay Jitter

20000 (10 times of A Sweep setting value) : 1 (at A Sweep 1 ms/div, B Sweep 1 µs/div)

Triggering Mode

Trigger Mode

AUTO, NORM, FIX, SINGLE, RESET

Trigger Sources

VERT, CH1, CH2, CH3, LINE

Trigger Coupling

AC, HF-REJ, DC, TV-F, TV-L

Trigger Sensitivity (NORM MODE)

Coupling	Frequency	NORM	FIX*
AC	10Hz to 50MHz	1.0 div	1.5 div
AC	50MHz to 100MHz	1.5 div	2.0 div
HF-REJ	10Hz to 10kHz	1.0 div	1.5 div
HF-REJ	10kHz	> min	> min
DC	DC to 50MHz	1.0 div	1.5 div
DC	50MHz to 100MHz	1.5 div	2.0 div
TV-F, TV-L	Composite video signal	1.5 div

(Above values are obtained with the signal input of: AUTO: 40 Hz or more, FIX: 50 Hz or more Internal sensitivity indicated as the amplitude on the CRT. Sensitivity in HF-Rej mode ">min" denotes the amplitude required for synchronization will increase.)

Calibration Signal

Waveform

Square wave

Polarity

Positive

Amplitude

1 Vp-p ± 1%

Frequency

1 kHz ± 0.1%

Intensity Modulation

Input Voltage

Dims at TTL high level ( 5V)

Input Impedance

Approx. 10 kΩ

Frequency Response

DC to 5 MHz

Max. Input Voltage

84 Vp-p or 42 V (DC AC peak, 1 kHz)

CH1 Signal Output (50W Load)

Output Voltage

Approx. 50 mVp-p/div

Output Impedance

Approx. 50Ω

Frequency Response

5 mV to 5 V/div.

100 Hz to 100 MHz (-3 dB)

　1 mV, 2 mV/div.

100 Hz to 20 MHz (-3 dB)

Trace Rotation

Enables trace rotation adjustment by semi-fixed controller on the panel

Power Requirements

Input Voltage

AC 100/120/220/230 V (±10% )

Frequency

50 Hz / 60 Hz

Power Consumption

Max.56W,Max.69VA

Insulator Voltage

AC 1.5 kV, 1 minute

Insulator Resistance

More than 100MW at DC 500 V

Dimensions/Weight

Dimensions (W × H × D)

305 × 150 × 400 mm /(344 × 165 × 459 mm, Maximum dimensions )

Weight

Approx.9.3kg

Operating Environment (limited as indoor use)

Altitude

Below 2000 m

Overvoltage Category

Pollution

Operating Temperature & Humidity

0 to 40°C, 85% or less (with no condensation)

Storage Temperature & Humidity

-20 to 70°C, 85% or less (with no condensation)

Accessories

Probe

PC-51(2)

　Other

Operation Manual (1)/Adjusting Screwdriver (1)/Power Cable (1)/Replacement (1)

Readout Section (CS-5400, CS-5450 only)

Panel Setup Value

CH1, CH2 scale factor (with probe detection), CH3 scale factor, V-UNCAL, ADD, INV, A/B Sweep scale factor (MAG conversion, "*" is displayed in MAG mode), X-Y, Sweep UNCAL, DELAY, TIME, B TRIG'D

Cursor Measurement

ΔV1 only in X-Y mode (Measures between DREF and cursor except the parameter automatic measurement) ΔV1: Voltage display by converting CH1 scale factor

ΔV2

Voltage display by converting CH2 scale factor

ΔV3

Voltage display by converting CH3 (0.1V/div. or 0.5V/div.) scale factor

ΔT

Time display by converting A Sweep scale factor

Δ1/T

Frequency display by converting Sweep scale factor

DCV, Vp-p, FRQ, PER

Display the parameter measurement value by automatic measurement function

VARIABLE or A VARIABLE at UNCAL

RATIO

Voltage ratio, time ratio display with 5 div. on the CRT as 100%

PHASE

Phase difference display with 5 div. on the CRT as 360°

DCV >, Vp-p >

Display ">" and inform that the input signal is larger than measurement value on CRT

Resolution/Measurement Error

10 bits/± 4%

Measuring Range

Vertical: More than ± 3.6 div. from the center of CRT
Horizontal: More than ± 4.6 div. from the center of CRT

Parameter auto setting function

Each parameter is measured and displayed for the signal selected as the trigger signal source from CH1 or CH2

Frequency (FRQ)

Mode selectable in Cursor mode. Measured with internal counter to be displayed

Frequency Range

CS-5400: 2 Hz to 100 MHz CS-5450: 2 Hz to 50 MHz

Effective Digits/Accuracy

5 digits/0.01% ± 1 digit

Measurement Sensitivity

Same as trigger sensitivity

Period (PER)

Mode selectable in Cursor mode. Measured with internal counter to be displayed

Measurement Range

CS-5400: 0.5 s to 10 ns CS-5450: 0.5 s to 20 ns

Effective Digits/Accuracy

5 digits/0.01% ±1 digit

Measurement Sensitivity

Same as trigger sensitivity

AC Voltage (Vp-p)

Mode selectable in Cursor mode. Peak-to-peak voltage is measured and displayed

Measurement Range

10 Hz to 1MHz: 0.5 div. to Effective CRT area 1MHz to 5MHz: 2.0 div. to Effective CRT area

Frequency Range

10 Hz to 5 MHz

Effective Digits

3 digits

Accuracy

10 Hz to 40 Hz: ± {8% attenuator setup value (V/div) × 0.04 div}
40 Hz to 1 MHz: ± {3% attenuator setup value (V/div) × 0.04 div}
1 MHz to 5 MHz: ± {5% attenuator setup value (V/div) × 0.04 div}

DC Voltage (DCV)

Mode selectable in Cursor more. Average DC voltage is measured and displayed

Sensitivity

0.5 div. to Effective CRT area

Effective Digits

3 digits

Accuracy

± {3% attenuator setup value (V/div) × 0.04 div}

Auto Setup

For CH1, CH2, Vertical axis attenuator, Sweep range, Vertical position, Horizontal position are automatically setup

Period

1.5 to 5 periods (H.Variable,: CAL mode, for input signal up to 10 MHz)

Amplitude

Within effective CRT area (within 1/2 of effective CRT area in dual-trace mode)

Frequency (Sine wave)

CS-5400: 50 Hz to 100 MHz, CS- 5450: 50 Hz to 50 MHz

Position

Vertical axis: 1 channel ; almost center of CRT, 2 channel ; CH1 approx. 2 div., CH2 approx. -2 div. from the center of CRT
Horizontal axis: starts from left edge of CRT scale

Backup

Panel setup values are backed up by built-in battery. Battery service life approx. 30,000 hours (with room temperature)

Kenwood
Main Page

Kenwood
Oscilloscopes

Kenwood
Price List

	Tequipment.NET 205 Westwood Ave Long Branch, NJ 07740 For our Electronic Whiteboard division visit www.touchboards.com		Tequipment.NET Phone: 1-877-742-TEST (8378) / 732-222-7077 Fax: (732) 222-7088 E-mail: salesteam@Tequipment.NET