| Patterns |
| Cross-hatch |
20 (V) ×16
(H)‚ white on black background‚ dot on the center‚
corner marker on the top left of screen |
| Dot |
20(V) ×16(H)‚
white on black background‚ corner marker on the top left of
screen. |
| Window |
0.5 ×0.5‚
white on black background. |
| Raster |
100% white‚
75% white‚ yellow‚ cyan‚ green‚ magenta‚
red‚ blue‚ black. |
| Color |
Split-field color
bars x 7 colors. |
| Full-field |
Full-field color
bars in order of luminance x 8 colors. |
| 10-step |
Full-field 10-step
bars. Level resolution 100‚ up to 5 patterns can be preset. |
| R/G/B |
Independent
ON/OFF of R‚ G and B in color signals.
| R |
G |
B |
COLOR |
| OFF |
OFF |
OFF |
BLACK |
| OFF |
OFF |
ON |
BLUE |
| OFF |
ON |
OFF |
GREEN |
| OFF |
ON |
ON |
CYAN |
| ON |
OFF |
OFF |
RED |
| ON |
OFF |
ON |
MAGENTA |
| ON |
ON |
OFF |
YELLOW |
| ON |
ON |
ON |
75%WHITE |
|
| LUMI |
ON/OFF of luminance
component in color signals. |
| CHROMA |
ON/OFF of chrominance
component in color signals. |
| 100% WHITE |
Switching of white
part in raster and color-bar patterns between 100% white and 75%
white. (White in IQW (UVW) part is fixed at 100%.) |
| Burst |
ON/OFF of color
burst component in all patterns. |
| Video
Output |
| Output level |
CAL: 1.0 Vp-p (75Ω
load)
VAR: 0 to 1.5 Vp-p (75Ω load) |
| Output impedance |
75Ω |
| Polarity |
Positive (Sync signals
are negative.) |
| S
Output |
| Output level |
Y S (SYNC - 100%
white): 1.0 Vp-p (75Ω load)
C (Burst): 286 (300) mVp-p (75Ω load) |
| Output impedance |
75Ω |
| RGB Outputs |
|
|
RGB |
Output level
Output impedance |
0.7 Vp-p (75Ω)
75Ω |
|
HD‚ VD |
Output level
Output impedance
Logic |
Approx. 4 Vp-p (open end)
75Ω
Negative logic |
| Sync
Output |
| Frequency (signal format) |
H/V composite and
vertical frequencies |
| Output level |
Approx. 1 Vp-p (open
end) |
| Output impedance |
75Ω |
| Subcarrier
Output |
| Frequency |
(CG-951) 3.579545
MHz (100 Hz)
(CG-952) 4.433619 MHz (100 Hz) |
| Output level |
Approx. 1 Vp-p (open
end) |
| Output impedance |
75Ω |
| Sync
Signals |
| H scanning frequency |
(CG-951) 15.734
kHz
(CG-952) 15.625 kHz |
| V scanning frequency |
(CG-951) 59.94 Hz
(CG-952) 50.00 Hz |
| Color
Burst |
| Min. 8 cycles at
the back porch of H sync signal (ON/OFF switchable). |
| Remote
Control (Optional) |
| Input connector |
24-pin Amphenol |
| Input level |
TTL level (H: 2.5
V or more or open. L: 0.8 V or less.) |
| Panel/remote switching |
1 bit (negative
logic) |
| Pattern and other control |
7 bits |
| RF
Output (Optional) |
| Output connector |
(CG-951) F connector
(CG-952) PAL connector |
| Modulation system |
Negative modulation |
| Output level |
60dBµ or more |
| Output impedance |
75Ω |
| Video
frequency |
| CH |
A |
B |
| CG-951 |
JAPAN CH |
CH1 91.25MHz |
CH3 97.25MHz |
| USA CH |
CH3 61.25MHz |
CH4 67.25MHz |
| CG-952 |
EUROPE CH |
CH2 48.25MHz |
CH3 55.25MHz |
| ITALY CH |
CHA 53.75MHz |
CHB 62.25MHz |
| AUSTRALIA CH |
CH1 57.25MHz |
CH2 64.25MHz |
| NEW ZEALAND CH |
CH2 55.25MHz |
CH3 62.25MHz |
| U.K. CH |
CH71 495.25MHz |
CH77 543.25MHz |
|
| Temperature/humidity for operation |
0 to 40°C‚
RH 85% max. |
| Temperature/humidity for characteristics
in spec. |
10 to 35°C‚
RH 85% max. |
| Power source |
100‚ 120‚
220‚ 230V AC ±10% (max. 250V)
50/60Hz |
| Power consumption |
Approx. 28W |
| Case dimensions |
212 (W)×133
(H)×272 (D) mm |
| Maximum dimensions |
212 (W) ×156
(H)×298 (D) mm |
| Weight |
Approx. 5.3kg |
| Accessories |
Instruction manual
(1)‚
power cord (1) |
;)
