|
Instek GSP-827
Spectrum Analyzer
Click image to enlarge
Low Price Guarantee
|
|
Features:
- Frequency Range: 9 kHz to 2.7 GHz
- Synthesized-based design provides accurate and high RF performance.
- Tracking generator provides frequency response measurement.
|
- ACPR, OCBW, CH Power offer the measurement in communication system.
- Variety of external reference clock (64k~19.2M) to adapt to different applications.
- Provides Quasi-Peak and optional filters for EMI test.
- 10 Markers with complete functions: Delta mode, Peak functions, Marker Track.
- Trace functions: Two trace with Peak Hold, Freeze, Average, Trace Math.
- Detect Modes:Normal, Sample, Peak, Quasi-Peak*
- Limit line: Upper and Lower limit with Pass/Fail test
- Trigger functions: Video, External
- Sweep: Single, Free Run
- Spilt Windows: Dual display windows
- Clock/calendar: Provides time/date in saved data.
- Input Impedance: 50 Ohm physical, changeable by set and offset calibrated
- Reference clock output: 10MHz
- Wide range of external reference clock: 64k, 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M
- Light-weight of 4.5 kg design.
- 100 trace files with date/time won’t lose any measurement.
- AC/DC/Battery multiple power mode operation provides more flexibility.
- GPIB and RS232 interface with PC for ATE system.
|
| Part No: |
Includes |
GSP-827-Opt08
General Kit set |
- 1 - GSC-002 Kit box
- 1 - ATN-100 10dB attenuator
- 2 - ADP-002 N-SMA adapters
- 2 - GTL-303 RF cables (SMA-SMA, RD316, 600mm)
|
GSP-827-Opt09
CATV Kit set |
- 1 - GSC-003 Kit box
- 2 - ADP-001 N-BNC adapters
- 2 - ADP-101 50? to 75? adapters
- 2 - GTL-304 RF cables (N(p)-N(J), RG223, 300mm)
|
GSP-827-Opt10
RLB Kit set |
- 1 - GSC-004: Kit box
- 1 - GAK-001: Termination
- 1 - GAK-002: Cap with Chain
- 2 - GTL-302: RF cable (N(P), RG223, 300mm)
|
| Model |
Description |
List Price |
Sale Price |
| GSP-827 |
Spectrum Analyzer - 150KHz-2.7 GHz |
$5100.00 |
| $4590.00 |  |
|
| GSP-830 |
9KHz-3 GHz |
$5100.00 |
| $4590.00 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| ATA-001 |
BNC Antenna - BNC to N Adapter may be required for use on certain models |
$30.00 |
| $27.00 | |
|
| GTL-301 |
RF Cable |
$65.00 |
| $58.50 | |
|
| GSP-827-Opt01 |
Tracking Generator, factory installed |
$1500.00 |
| $1350.00 | |
|
| GSP-827-Opt02 |
Battery Pack, factory installed |
$700.00 |
| $630.00 | |
|
| GSP-827-Opt03 |
+/- 1ppm stability, factory installed |
$330.00 |
| $297.00 | |
|
| GSP-827-Opt06 |
GPIB interface, factory installed |
$330.00 |
| $297.00 | |
|
| GSP-827-Opt07 |
Carrying Case |
$210.00 |
| $189.00 | |
|
| GSP-827-Opt08 |
General Kit set |
$330.00 |
| $297.00 | |
|
| GSP-827-Opt09 |
CATV Kit set |
$360.00 |
| $324.00 | |
|
| GSP-827-Opt10 |
RLB Kit set |
$240.00 |
| $216.00 | |
|
| GSP-827-Opt11 |
DC Car Cord - Only works with Battery Pack (GSP-827-Opt02) |
$40.00 |
| $36.00 | |
|
| GSP-827-Opt12 |
EMI Filters, factory installed |
$1150.00 |
| $1035.00 | |
|
| GSP-827-Opt13 |
Demodulator, factory installed |
$1200.00 |
| $1080.00 | |
|
| GSP-827-Opt14 |
EMI filters and 300Hz RBW, factory installed |
$2300.00 |
| $2070.00 | |
|
| GSP-827-Opt15 |
EMI filters and Demodulator, factory installed |
$2300.00 |
| $2070.00 | |
|
| GSP-827-Opt16 |
EMI filters, 300Hz RBW, Demodulator, factory installed |
$3400.00 |
| $3060.00 | |
|
When ordering ATA-001, BNC to N Adapter required (sold seperately).
Click here to download the Instek GSP-827 manual (PDF)
Click here to download the Instek GSP-827 specs (PDF)
Specifications:
| |
Item |
Specification |
|
| Frequency |
Range |
9kHz-2.7GHz |
| Accuracy |
see time base |
| Span Accuracy |
see time base |
| SpanRange |
2kHz to 2.5GHz in 1/2/5sequence, full span, zero span |
| Phase Noise |
-85dBc/Hz @1GHz 20kHz Offset typical |
| Time Base |
± 10ppm, 0-50C, 1ppm/yr |
| Bandwidth |
RBW Selections |
3kHz, 30kHz, 300kHz, 4MHz, |
| RBW Accuracy |
15% |
| Video Bandwidth |
10Hz to 1MHz in 1-3 steps |
| Sweep time |
100 ms to 25.6 s |
| Amplitude |
Input Range |
-105dBm to +20dBm 10M to 2.5GHz
-100dBm to +20dBm 2.5GHzm to 2.7GHz |
| Reference Level Range |
-30 to +20dBm, overload protected |
| Accuracy |
± 1.5dB @100MHz |
| Frequency Flatness |
±1.5dB, |
| Display Range Linearity |
± 1.5dB over 70dB |
| Overload protection |
+30dBm, ±25VDC |
| Average Noise Floor |
-140dBm/Hz 10MHz to 2.5GHz
-135dBm/Hz 2.5GHz to 2.7GHz |
| Harmonic Distortion |
<-40dBc, RF Input <Selected Reference Level |
| Non-harmonic Spurious |
<-60dB, Down from Reference Level |
| Third Intermodulation |
<-70dBc @-40dBm Input |
| Trace Detection: |
Peak, Average |
| Input |
RF input Overload Protection |
+30dBm Continuous |
| Impedance: |
50 Ohm nominal |
| Return loss |
<1.5:1 @10M to 2.5GHz, 0dBm
<2:1 @2.5GHz to 2.7GHz, 0dBm |
| Connector |
Type N Female |
| External reference clock inputFrequency |
64k, 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M |
| Others |
Internal Memory |
100 traces or Setup |
| Power measurement |
ACPR, OCBW, Channel power |
| Reference clock output |
10MHz |
| General |
Display: |
640 x 480 high resolution graphical LCD, B&W |
| Interfaces: |
RS232C, |
| Features |
Trace memory and math, Marker search functions, |
| Weight: |
4.5kg, |
| Size |
330 (W) x 170(H) x 340(D) mm |
| Certification |
CE, Installation category II, pollution degree 2 |
Options:
Option 1
Tracking Generator* |
Frequency Range |
9MHz to 2.7GHz |
| Amplitude Range |
-50dBm to 0 dBm |
| Amplitude accuracy |
±1dB @100MHz, 0dBm |
| Amplitude flatness |
±1.5dB @0dBm |
| Harmonics |
<-30dBc typical |
| Reverse Power |
+30dBm |
| Impedance |
N female, 50 Ohm nominal |
| RF output VSWR |
<1.5:1 |
Option 2
AC/DC/Battery Operaion with Battery Pack |
IAC 100~240V; DC 12V; 10.8V Li-Ion Battery Pack |
Option 3
±1ppm Stability |
±1ppm, 0~50°C, 1ppm/yr |
Option 6
GPIB Interface |
IEEE 488 Bus |
Option 7
Soft Carrying Case |
GSC-001 |
Option 8
General kit set |
ADP-002: |
N-SMA adapter x2 |
| ATN-100: |
10dB attenuator x1 |
| GTL-303: |
RF cable(SMA-SMA, RD316, 600mm) x2 |
| GSC-002: |
Kit box x1 |
Option 9
CATV kit set |
ADP-001: |
N-SMA adapter x2 |
| ATN-101: |
50Ω to 75Ω adapter x2 |
| GTL-304: |
RF cable(N(p)-N(J), RG223, 300mm) x2 |
| GSC-002: |
Kit box x1 |
Option 10
RLB kit set |
GAK-001: |
Termination x1 |
| GAK-002: |
Cap with Chain x1 |
| GTL-303: |
RF cable(N(P), RG223, 300mm) x2 |
| GSC-004: |
Kit box x1 |
Option 11
DC Power Line |
GTL-401: DC Power cord with DC jack and lighter plug, current 5A |
Option 12
EMI Filter (*) |
RBW Selections: 9kHz and 120kHz, 6dB bandwidth
RBW Accuracy: 15% |
Option 13
Demodulator (*) |
Demodulation: AM, FM
Output: Internal speaker, 3.5mm stereo jack wired for mono operation |
Option 14
EMI Filters and 300Hz RBW (*) |
RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth
RBW Accuracy: 15% |
Option 15
EMI Filters and Demodulator (*) |
RBW Selections: 9kHz and 120kHz, 6dB bandwidth
RBW Accuracy: 15%
Demodulation: AM, FM
Output: Internal speaker, 3.5mm stereo jack wired for mono operation |
Option 16
EMI Filters, 300Hz RBW, and Demodulator (*) |
RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth
RBW Accuracy: 15%
Demodulation: AM, FM
Output: Internal speaker, 3.5mm stereo jack wired for mono operation |
| NOTE (*): Only one option can be installed for one given GSP-827 unit |
|
;)
