| CRT |
Type: |
6-inch rectangular type with internal graticule; 8 x 10 DIV (1 DIV = 1 cm) |
| Phosphor: |
P31 |
| Accelerating Potential: |
2kV |
| Polarity: |
Positive-going input decrease |
| Focus Control: |
Auto focus |
| Z-Axis Input: |
Sensitivity: above 5Vpp
Maximum input voltage: 30V (DC + AC peak)
Bandwidth: DC ~ 2MHz |
| Function Generator |
Frequency Range: |
0.1Hz ~ 1MHz (7 ranges) |
| Waveform: |
Sine wave, square wave, triangle wave |
| Frequency Variable Range: |
10:1 or more |
| Output Impedance: |
50W ±10% |
| Voltage: |
Over 14Vpp (open circuit) continuous conversion
DC offset possible over ±6V when open |
| Sine Wave Distortion: |
2% maximum (10Hz ~ 100kHz) |
| Square Wave Unsymmetry: |
±3% or less (in 1kHz maximum) |
| Square Wave Rise/Fall Time: |
50W output: 120ns or less |
| Vertical System |
Sensitivity: |
5mV ~ 5V/DIV ±3%
1mV/DIV ~ 1V/DIV ±5% (using x 5 MAG) |
| Bandwidth: |
DC ~ 20MHz
DC ~ 7MHz at x 5 MAG |
| Rise Time: |
Approx 17.5ns (Approx 50ns at x 5 MAG) |
| Maximum Input: |
300V (DC + AC peak) at 1kHz |
| Input Impedance: |
1MW approx // 25pF |
| Input Coupling: |
AC, DC, GND |
| Vertical Mode: |
CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV |
| Horizontal System |
Sweep Time: |
0.2µs ~ 0.5s/DIV ±3% (±5% at x 10 MAG) |
| Maximum Sweep Rate: |
100ns/DIV (20ns and 50ns/DIV are uncalibrated) |
| Trigger |
Trigger Mode: |
AUTO, NORM, TV-V, TV-H |
| Trigger Source: |
CH1, CH2, ALT, LINE, EXT |
| Trigger Slope: |
"+" or "-" |
| X-Y Operation |
Sensitivity: |
5mV ~ 5V/DIV ±4% |
| X-Axis Bandwidth: |
DC ~ 500kHz |
| Phase Error: |
3º or less from DC ~ 50kHz |
| Output Signal |
Trigger Signal Output: |
Voltage: approx 20mV/DIV into 50W
Bandwidth: 50Hz to 5MHz (-3dB)
Impedance: Approx 50W |
| Calibrator Output: |
1kHz square wave, 2Vpp ±2% |
| Other Details |
Power Source: |
AC 115V/230V ±15%, 50/60Hz |
| Accessories: |
Power cord x 1, Instruction manual x 1, Probe (10:1/1:1) x 2 |
| Dimensions: |
310mm (w) x 150mm (h) x 455mm (d) |
| Weight: |
8.5kg approx |
;)
