| CRT |
Type: |
6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers; 8 x 10 DIV (1 DIV = 1 cm) |
| Phosphor: |
P31 |
| Accelerating Potential: |
14kV approx |
| Illumination: |
Continuously adjustable |
| Z-Axis Input: |
Coupling: DC
Sensitivity: 5V or more
Maximum input voltage: 30V (DC + AC peak) at 1kHz or less
Bandwidth: DC ~ 5MHz |
| Vertical System |
Sensitivity: |
2mV ~ 5V/DIV, 11 step in 1-2-5 sequence |
| Sensitivity Accuracy: |
£ 3% (5 DIV at the centre of display) |
| Vernier Vertical Sensitivity: |
Continuously variable to 1/2.5 or less of panel-indicated value |
| Bandwidth (-3dB): |
DC ~ 200MHz (2mV/DIV : DC ~ 20MHz) |
| Rise Time: |
1.75ns (2mV/DIV : 17.5ns) |
| Signal Delay: |
Leading edge can be monitored |
| Maximum Input Voltage: |
400V (DC + AC peak) at 1kHz or less |
| Input Coupling: |
AC, DC, GND |
| Input Impedance: |
1MW ±2% // approx 25pF |
| Vertical Modes: |
CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV |
| Bandwidth Limited: |
20MHz |
| Common Mode Rejection Ratio: |
50:1 or better at 50kHz |
| Dynamic Range: |
8 DIV at 100MHz; 5 DIV at 200MHz |
| Horizontal System |
Horizontal Modes: |
MAIN (A), ALT, DELAY (B) |
| A (Main) Sweep Time: |
20ns ~ 0.5s/DIV, continuously variable (UNCAL) |
| B (Delay) Sweep Time: |
20ns ~ 50ms/DIV |
| Accuracy: |
±3% (±5% at x 10 MAG) |
| Sweep Magnification: |
x 10 (maximum sweep time 2ns/DIV) |
| Hold Off Time: |
Variable |
| Delay Time: |
1µs ~ 5s |
| Delay Jitter: |
Better than 1:20000 |
| Alternate Separation: |
Variable |
| Trigger |
Trigger Modes: |
AUTO, NORM, TV |
| Trigger Source: |
CH1, CH2, LINE, EXT, EXT/10 |
| Trigger Coupling: |
AC, DC, HFR, LFR, NR |
| Trigger Slope: |
+ or - polarity or TV sync polarity |
| Trigger Sensitivity: |
| Mode |
Frequency |
INT |
EXT |
EXT/10 |
| AUTO |
10Hz ~ 20MHz |
0.35 DIV |
50mV |
500mV |
| 20MHz ~ 200MHz |
1.5 DIV |
150mV |
1.5V |
| NORM |
DC ~ 20MHz |
0.35 DIV |
50mV |
500mV |
| 20MHz ~ 200MHz |
1.5 DIV |
150mV |
1.5V |
| TV |
Sync signal |
1 DIV |
200mVpp |
2Vpp |
|
| Trigger Level Range: |
INT: ±4 DIV or more; EXT: ±0.4V or more; EXT/10: ±4V or more |
| TV Triggering: |
Mode: TV-V, TV-H, TV-LINE |
| TV-Line Selection: |
| Standard |
Field 1 |
Field 2 |
| NTSC (525H) |
1H ~ 263H |
1H ~ 262H |
| PAL (625H) |
1H ~ 313H |
1H ~ 312H |
| SECAM (625H) |
|
| Max. External Input Voltage: |
400V (DC + AC peak) at 1kHz |
| External Input Impedance: |
1MW ±5% // approx 25pF |
| X-Y Operation |
Mode: |
X-axis: selectable CH1, EXT, EXT/10; Y-axis: selectable CH1, CH2, CH1 and CH2 |
| Sensitivity Accuracy: |
2mV ~ 5V/DIV ±3%; EXT: 0.1V/DIV ±5%; EXT/10: 1V/DIV ±5% |
| X-Axis Bandwidth: |
DC ~ 500kHz (-3dB) |
| Phase Error: |
3º or less from DC ~ 50kHz |
| Output Signal |
Trigger Signal Output: |
Voltage: approx 25mV/DIV into 50W; Frequency response: DC ~ 10MHz |
| Calibrator Output: |
1kHz square wave, 2Vpp ±2% |
| Cursor Readout Function |
Cursor Measurement Function: |
DV, DV%, DVdB, DT, 1/DT, DT%, Dq |
| Cursor Resolution: |
1/100 DIV |
| Effective Cursor Range: |
Vertical: ±3 DIV; Horizontal: ±4 DIV |
| Panel Setting Display: |
Vertical: V/DIV (CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND
Horizontal: S/DIV (MTB, DTB), UNCAL, x 10 MAG, delay time, HO
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y, lock, save/recall MEM 0-9 |
| Auto Measurement Function |
Parameter Function: |
FREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope) |
| Display Digits: |
Max 6 digits, decimal |
| Frequency Range: |
50Hz ~ 200MHz |
| Accuracy: |
1kHz ~ 200MHz: ±0.01%; 50Hz ~ 1kHz: ±0.05% |
| Measuring Sensitivity: |
> 2 DIV (measuring source selected from CH1 and CH2 as synchronous signal sources) |
| Special Functions |
Auto Set: |
Input channel: CH1, CH2; Frequency response 50Hz ~ 50MHz |
| Panel Setting Save and Recall: |
10 sets |
| Panel Setup Lock: |
Provided |
| Other Details |
Power Source: |
AC 100V/120V/230V ±10%, 50/60Hz |
| Accessories: |
Power cord x 1, Instruction manual x 1, Probe (10:1/1:1) x 2 |
| Dimensions: |
310mm (w) x 150mm (h) x 470mm (d) |
| Weight: |
9kg approx |