Click to Enlarge Image Low Price Guarantee

Features: 100MHz Bandwidth Dual Channel Delayed Sweep Built-in 6 Digit Universal Counter (GOS-6103C) Time Base Auto Range 10 Front Panel Setting Memories Cursor Readout with 7 Measurements TV Synchronisation Z-Axis Modulation Input

Model	Description	List Price	Sale Price
GOS-6103C	Analog Oscilliscope - 100MHz with counter	$1395.00	$1255.50

Accessories

Specifications

CRT	Type:	6-inch  rectangular type with internal graticule; 0%, 10%, 90% and 100% markers; 8 x 10 DIV (1 DIV = 1 cm)
	Phosphor:	P31
	Accelerating Potential:	16kV approx
	Illumination:	Continuously adjustable
	Z-Axis Input:	Coupling: DC Sensitivity: 5V or more Maximum input voltage: 30V (DC + AC peak) at 1kHz or less Bandwidth: DC ~ 5MHz
Vertical System	Sensitivity:	2mV ~ 5V/DIV, 11 step in 1-2-5 sequence
	Sensitivity Accuracy:	£ 3% (5 DIV at the centre of display)
	Vernier Vertical Sensitivity:	Continuously variable to 1/2.5 or less of panel-indicated value
	Bandwidth (-3dB):	DC ~ 100MHz (2mV/DIV : DC ~ 20MHz)
	Rise Time:	3.5ns (2mV/DIV : 17.5ns)
	Signal Delay:	Leading edge can be monitored
	Maximum Input Voltage:	400V (DC + AC peak) at 1kHz or less
	Input Coupling:	AC, DC, GND
	Input Impedance:	1MW ±2% // approx 25pF
	Vertical Modes:	CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV
	Bandwidth Limited:	20MHz
	Common Mode Rejection Ratio:	50:1 or better at 50kHz
	Dynamic Range:	8 DIV at 100MHz
Horizontal System	Horizontal Modes:	MAIN (A), ALT, DELAY (B)
	A (Main) Sweep Time:	50ns ~ 0.5s/DIV, continuously variable (UNCAL)
	B (Delay) Sweep Time:	50ns ~ 50ms/DIV
	Accuracy:	±3% (±5% at x 10 MAG)
	Sweep Magnification:	x 10 (maximum sweep time 5ns/DIV)
	Hold Off Time:	Variable
	Delay Time:	1µs ~ 5s
	Delay Jitter:	Better than 1:20000
	Alternate Separation:	Variable
Trigger	Trigger Modes:	AUTO, NORM, TV
	Trigger Source:	CH1, CH2, LINE, EXT
	Trigger Coupling:	AC, DC, HFR, LFR
	Trigger Slope:	+ or - polarity or TV sync polarity
	Trigger Sensitivity:	Mode Frequency INT EXT AUTO 10Hz ~ 20MHz 0.35 DIV 50mV 20MHz ~ 100MHz 1.5 DIV 150mV NORM DC ~ 20MHz 0.35 DIV 50mV 20MHz ~ 100MHz 1.5 DIV 150mV TV Sync signal 1 DIV 200mVpp
	TV Sync:	TV-V, TV-H
	Max. External Input Voltage:	400V (DC + AC peak) at 1kHz
	External Input Impedance:	1MW ±5% // approx 25pF
X-Y Operation	Mode:	X-axis: selectable CH1, EXT; Y-axis: selectable CH1, CH2, CH1 and CH2
	Sensitivity Accuracy:	2mV ~ 5V/DIV ±3%; EXT: 0.1V/DIV ±5%
	X-Axis Bandwidth:	DC ~ 500kHz (-3dB)
	Phase Error:	3º or less from DC ~ 50kHz
Output Signal	Trigger Signal Output:	Voltage: approx 25mV/DIV into 50W; Frequency response: DC ~ 10MHz
	Calibrator Output:	1kHz square wave, 2Vpp ±2%
Cursor Readout Function	Cursor Measurement Function:	DV, DV%, DVdB, DT, 1/DT, DT%, Dq
	Cursor Resolution:	1/100 DIV
	Effective Cursor Range:	Vertical: ±3 DIV; Horizontal: ±4 DIV
	Panel Setting Display:	Vertical: V/DIV (CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND Horizontal: S/DIV (MTB, DTB), UNCAL, x 10 MAG, delay time, HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, lock, save/recall MEM 0-9
Auto Measurement Function	Parameter Function:	FREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope)
	Display Digits:	Max 6 digits, decimal
	Frequency Range:	50Hz ~ 100MHz
	Accuracy:	1kHz ~ 100MHz: ±0.01%; 50Hz ~ 1kHz: ±0.05%
	Measuring Sensitivity:	> 2 DIV (measuring source selected from CH1 and CH2 as synchronous signal sources)
Special Functions	TIME/DIV Auto Range:	Provided
	Panel Setting Save and Recall:	10 sets
	Panel Setup Lock:	Provided
Other Details	Power Source:	AC 100V/120V/230V ±10%, 50/60Hz
	Accessories:	Power cord x 1, Instruction manual x 1, Probe (10:1/1:1) x 2
	Dimensions:	310mm (w) x 150mm (h) x 455mm (d)
	Weight:	9kg approx