GLA-1016 Logic Analyzer
16 Channel

The GLA-1016 is a palm-size PC based logic analyzer with functionality matching that of a desktop device. The 16 channels, 200 MHz internal sampling rate, 256 kbits of data memory and advanced trigger settings give user higher accuracy and longer data analysis result. The unique features "Data-loss-less compression" , "Enable Qualifier" and "Serial Bus Protocol Analyzer" provide engineers and professionals with a mean, which can adequately handle today's digital system analysis. The whole captured data and setting of GLA-1000 Series could be saved as various types of files into PC for further data analysis, reporting, and other applications. The USB 2.0 communication between GLA-1000 Series and the PC guarantees the secured data transfer at the maximum speed while providing GLA-1000 Series with power source.

Compact Size With Full Functionality

The GLA-1000 Series is a palm-size PC based Logic Analyzer with funtionality matching that of a desktop device. The maximum 32 channels, 1Mbits of data memory, and powerful features of the GLA-1000 Series provide digital engineers & professionals with a means which can adequately handle today's digital system analysis. All operations of the GLA-1016, GLA-1032, and GLA-1132 are done under the environment of Window TM based PC software, which provides a user-familiar GUI and a large screen display facilitating complex measurements of digital devices.

High-Speed Signal Aquisition and Measurements

With 200MHz internal sampling rate, the timing analysis of GLA-1000 Series conforms even to today's cutting edge digital technology. The 100MHz external sampling rate gives user high confidence in performing table and synchronized state analysis. The maximum 1Mbits of data memory per channel, enhanced by up to x 255 data-loss-less compression, enables longer data acquisition and deeper data analysis. The channel grouping could be done randomly based on the user-defined configuration, which provides flexible channel arrangements for sophisticated digital measurements.

Advanced Trigger Functions

The trigger setting could be done either from a trigger selection soft key in front of each channel display for individual channel setting or through a dialog window for pre-defined Bus pattern setting. The selection of trigger conditions include high , low, rising edge, falling edge, either edge and don't care for all channels or a Binary , Decimal or Hexadecimal code of a pre-defined Bus. The userselectable threshold, in TTL, CMOS, ECL and userdefined voltage (-6.0V~+6.0V), allows quick adoption of measurements on a multi-voltage digital system. Like a modern DSO , GLA-1000 Series features advanced trigger functions , including time delay trigger, clock event delay trigger, page delay trigger and Post/Pre trigger display. The unique feature "Enable Qualifier" picks up only the portions of data that match the user pre-defined condition after the signal being triggered. This function effectively reduces the redundant data and collects as much as possible the useful data sections within the limited memory. Three control signal output terminals, Start, Trigger & End, are provided to facilitate the control over external devices. When GLA-1000 Series triggers on a signal, its trigger output signal could activate a DSO to get asynchronized real-time waveform for the crossreferenceof digital data and analog signal waveform.This is a typical example among all the applicationsof control signal outputs.

Powerful Data Analysis Capability

A data-search dialogue window helps finding the user-defined data from the chunky data stream acquired after triggering. A bar cursor automatically locates the found data pattern and put it to the screen center. The additional bar(s) could be used to indicate time or clock event between two data patterns of interest. A statistics feature is provided to calculate the number count of a userdefined data pattern that shows up within the overall acquired data stream or to calculate the number count of a user defined high-low status of the data section that shows up in a channel. GLA-1000 Series also offers a tool to perform the analysis of serial bus protocol. This feature supports the most popular standards, RS-232C & I C.

User-friendly Operation

All the settings & operations of GLA-1000 Series are done under the Windows TM environment, which offers the customizable keyboard shortcuts and the toolbar icons that could significantly shorten the learning curve of the first-time users. The horizontal scale of the display is selectable between time and sampling clock and the data waveform is selectable between Ramp & Square to accommodate various application demands. The screen background and data waveforms are all color-definable to ease the observation of display Information. A default color configuration is provided for easy getting-back to the standard color setting once needed.

Flexible File Export Functions

The whole, or a user-defined clip, of screen image, captured data and setting of GLA-1000 Series could be saved as various types of files into PC for further data analysis, reporting, and other applications. The USB 2.0 communication between GLA-1000 Series and the PC guarantees the secured data transfer at the maximum speed while providing GLA-1000 Series with a power source.