Click to Enlarge Image Low Price Guarantee

Features: 0.1Hz ~ 10MHz Frequency Range Sine, Square, Triangle, Ramp, TTL and CMOS Output Waveforms External Voltage Controlled Frequency (VCF) Function Duty Cycle Control with Signal Inversion Capability Variable DC Offset Control Two Step (-20dB x 2) and Variable Attenuator Built-in 6 Digit Counter with INT/EXT Function up to 150MHz LIN/LOG Sweep Mode Sweep Output

 Specifications

Main Output	Frequency Range:	0.1Hz ~ 10MHz in 8 ranges
	Amplitude:	³10Vpp (into 50W load)
	Impedance:	50W ±10%
	Attenuator:	-20dB ±1dB x 2
	DC Offset:	<-5V ~ >+5V (into 50W load)
	Duty Control:	15% : 85% : 15% to 1MHz continually variable (square wave only)
	Display:	6 digit LED display
Sine Wave	Distortion:	1% typical, <3% maximum at 1kHz
	Flatness:	±0.45dB (±5%)
Triangle Wave	Linearity:	³98% to 100kHz
Square Wave	Symmetry:	±2% 1Hz ~ 100kHz
	Rise/Fall Time:	£35ns
CMOS Output	Maximum Frequency:	2MHz
	Level:	£4Vpp ~ 14.5Vpp ±0.5Vpp adjustable
	Rise/Fall Time:	£120ns
TTL Output	Level:	³3Vpp
	Rise/Fall Time:	£20ns
VCF	Input Voltage:	0V ~ 10V ±1V (100:1)
	Input Impedance:	10kW ±10%
Sweep Operation	Sweep/Manual:	Switch selectable
	Sweep Rate:	>100:1 ratio maximum adjustable
	Sweep Time:	0.5s ~ 30s adjustable
	Sweep Mode:	Lin/Log switch selectable
	Sweep Out:	0V ~ 10V ±1V
Frequency Counter	INT/EXT:	Switch selectable
	Range:	0.1Hz to 10MHz (EXT 5Hz ~ 150MHz)
	Accuracy:	Time base accuracy ±1 count
	Time Base:	±20ppm (23°C ±5°C) after 30 minutes warm up
	Resolution:	Maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
	Input Impedance:	1MW // 150pF
Other Details	Power Source:	AC 115V/230V ±15%, 50/60Hz
	Accessories:	Power cord x 1, Instruction manual x 1, Test Lead (type GTL-101) x 2
	Dimensions:	251mm (w) x 91mm (h) x 291mm (d)
	Weight:	2.2kg approx