| Main |
| Output Waveforms |
Sine, Square, Triangle, ±Ramp, Pulse, AM, FM, Sweep, Trigger, Gate, Burst |
| Frequency Range |
10mHz~15MHz in 8 Frequency Range (auto switch) |
| Frequency Resolution |
15MHz~150kHz(100Hz);1.5MHz~15kHz(10Hz); 150kHz~1.5kHz(1Hz);15kHz~150Hz(0.1Hz);1.5kHz~15Hz(10mHz); 150Hz~1.5Hz(10mHz);15Hz~0.15Hz(10mHz); 1.5Hz~0.01Hz(10mH) |
| Frequency Accuracy |
0.02% + 5 count |
| Output Impedance |
50Ω ±10% |
| Amplitude Range |
10.00V~0.01V(into 50Ω ) 4 amplitude ; |Vac peak|+|Vdc|=5V |
| Resolution |
10mV (10.00V~0.01V) |
| Amplitude Accuracy |
≤3%± 5 count at 10Hz~1MHz ; ≤10%±5count at 1MHz~15MHz |
| Amplitude Unit |
Vpp, Vrms, dBm |
| DC Offset |
-5V~+5V(into 50Ω ) ; Resolution 10mV |
| DC Offset Accuracy |
≤3%± 3 count at amplitude min. |
| Duty Control |
80%:20%:80% to 1MHz ; Resolution 1% |
| Duty Accuracy |
≤1% ~ 1MHz at 50% duty |
| Display |
Dual Display for Frequency 6 digits and Amplitude 4 digits |
| Sine Wave |
| Distortion |
≤ 0.5%(-46dB) THD from 10Hz to 100kHz; ≤-30dBc to 15MHz (spec. applied form 1Vpp~10Vpp) |
| Triangle Wave |
| Linear Error |
<1% of full scale output at 100Hz |
| Square Wave |
| Asymmetry |
±1% of period + 3ns |
| Rise or Fall Time |
< 18nS |
| SYNC Output |
| Impedance |
50Ω±10% |
| Level |
> 1Vpp open circuit |
| Modulation Characteristics |
| Types |
AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type) |
| Waveform |
Sine, square, triangle, ramp or Variable Symmetry Pulse |
| Rate Frequency Range |
10mHz~10kHz in 3 Frequency Range (auto switch) |
| Rate Frequency Accuracy |
5% ±1 count |
| Rate Frequency Resolution |
10.0kHz~0.1kHz(100Hz); 99Hz~1Hz(0.1Hz); 0.99Hz~0.01Hz(0.01Hz) |
| Symmetry |
90%:10%:90% ; Resolution1% |
| Symmetry Accuracy |
±1 count (≤±1%) |
| Output Level |
≧1Vp-p into 10KΩ load |
| Sine Wave Distortion |
≤1% from 10Hz to 10kHz |
| Amplitude Modulation |
| Depth |
0~100% |
| Modulation Frequency Rate |
0.01Hz~10kHz(INT) DC~1MHz(EXT) |
| Carries –3dB Bandwidth |
<100Hz to >5MHz |
| External Sensitivity |
≤10Vp-p for 100% modulation |
| Frequency Modulation |
| Deviation |
0 ~ ±5% |
| Modulation Frequency Rate |
0.01Hz~10kHz(INT) DC~50kHz(EXT) |
| External Sensitivity |
≤5Vpp for 15% deviation |
| Sweep Characteristics |
| Sweep Range |
15MHz~150kHz ; 1.5MHz~15kHz ; 150kHz~1.5kHz ; 15kHz~150Hz ; 1.5kHz~15Hz ; 150Hz~1.5Hz ; 15Hz~0.15Hz ; 1.5Hz~0.01Hz |
| Width |
>100:1 (in same frequency range) |
| Rate |
0.01Hz~10kHz |
| Symmetry Control |
90%:10%:90% ; Resolution1% |
| Mode |
Linear / Log sweep |
| Sweep output |
0 to ≧-5Vp-p into 10KΩ |
| Trigger Characteristics |
| Start/Stop Phase Range |
80°~90° |
| Rate |
0.1Hz~10kHz |
| Frequency Range |
0.1Hz~1MHz(Useful to 10MHz) |
| Ext TRIG Frequency Range |
DC to 1MHz,TTL compatible input level |
| Gate or Burst |
Implement by trigger setting |
| VCF |
| Range |
100:1(0 to 10V±1) |
| Input Linearity |
<0.5% to 1MHz,<5% to 10MHz |
| Input Impedance |
10kΩ |
| GCV Output |
To set the voltage between 0.2V to 2V as per different Frequency |
| Frequency Counter |
| INT/EXT |
Switch Selector |
| Range |
5Hz~150MHz EXT |
| Accuracy |
Time base accuracy ±1count |
| Time Base |
±20ppm(23℃±5℃) after 30 minutes warm up |
| Resolution |
The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz |
| Input Impedance |
1MΩ // 150pF |
| Sensitivity |
≤35Vrms(5~100MHz);≤45Vrms(100MHz~150MHz) |
| Memory |
| Save/Recall |
10 Sets of front panel setting memories |
| Interface |
RS-232C |
| Power Source |
AC 115V/230V±15%, 50/60Hz |
| Accessories |
Power cord × 1, Instruction manual × 1, GTL-101 × 2 |
| Dimensions & Weight |
290(W) × 142(H) × 460(D) mm, Approx. 5 kg |
;)
