| TEST CURRENT |
AC 3A ~ 32A |
| TEST VOLTAGE |
MAX 8V AC Typically |
| MEASURING RESISTANCE RANGE |
0 to 0.12 , 0 ~ 0.6Ω2 ranges |
| MEASURING ACCURACY |
3A ~ 5A 10% of full scale
5A ~ 32A 5% of full scale |
| CURRENT METER |
Indicate the testing Current and Setting value of Warning |
| RESISTANCE METER |
Indicate the testing Resistance and Setting value of Fail and Subtraction |
| SWITCHING |
Zero-start operating switch |
| TIMER |
1S, 10S, 1MIN, 10MIN, 4 ranges |
| WARNING |
Monitor the variation test current, When the test current is beyond 10% of the setting value, the warning operation will proceed
The setting value from 3A ~ 32A |
| SUBTRACTION |
The resistance of testing line can be subtracted from the test value
The subtraction range from 0 ~ 0.1Ω
Accuracy is ±5% |
| GO-NOGO SET |
If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed.
The setting value from 5% ~ 100% of the test range
Accuracy is ±15% of full scale (3A ~ 5A)
plusmn;10% of full scale (5A ~ 32A) |
| REMOTE CONTROL |
Input high voltage range from 11V ~ 15V, Low voltage range from 0 ~ 4V and input Low current range below 20mA |
| TEST MODE |
Normal - if the warning acted then the test will stop
Continue - if the warning acted then the test will be continuously |
| BUZZER |
A Buzzer is sounded when the test fail acted |
| TEST FREQUENCY |
50Hz or 60Hz independent by Line Voltage |
| OUTPUT SIGNAL |
TEST, GO, NG, WARNING, READY, MONITOR |
| POWER SOURCE |
AC 100V/120V/ 220V/ 240V 10% , 50/60Hz |
| ACCESSORIES |
Instruction manual x 1 , Power cord x 1 , Test Lead GTL-115 x 1 |
| DIMENSIONS & WEIGHT |
430(W) x 178(H) x 510(D) mm , Approx. 21 kg |
;)
