|
Innoventions INN-8668-5 RAMCheck Sync Chip Test Adapter (54+50+44 pin) for TSOP testing
Click image to enlarge
Innoventions INN-8668-5
|
|
|
Description
The latest addition to the RAMCHECK® line provides needed support for testing of SDRAM and standard EDO/FPM DRAM 100-pin SO DIMM modules at an affordable price. RAMCHECK automatically detects the presence of the RC 100 Adapter (p/n INN-8668-5). The tester also automatically determines if the tested module is SDRAM or standard DRAM without the need for special setup. In fact, you can test standard DRAM devices following an SDRAM, or vice versa, without the need of manual settings. Standard DRAM testing is similar to the regular EDO/FPM test procedure.
The RC DIMMCHECK 100 Adapter bursts complex pattern tests, into and from the tested module, at a true 133MHz (or faster) synchronous rate. The automatic test provides the tested module's size, voltage, frequency, and type. RAMCHECK's internal 184MHz test engine verifies that the tested module can accept the various mode commands, including CAS latency of 1, 2, and 3, sequential, or interleave type bursts at different lengths, and the single write mode. It further verifies interleaved bank operation.
Required RAMCHECK Firmware Version: 2.14
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| INN-8668-5 |
RAMCHECK DIMMCHECK 100 (for 100-pin SODIMM modules) |
$545.00 |
| $539.55 |  |
|
|
;)