|
Innoventions INN-8558-4 SIMCheck II Direct Printer Interface
Click image to enlarge
Innoventions INN-8558-4
|
|
|
Description
The optional DIRECT PRINTER INTERFACE, p/n INN-8558-4, allows you to print directly from RAMCHECK or SIMCHECK to a printer, without the need of a PC connection. This option includes a special adapter, which connects to the SIMCHECK 16-pin IDC socket, and a special PAL chip, which controls the IDC socket.
Please note that the PC Communications package which is included with your RAMCHECK or SIMCHECK unit allows you to print all reports on your PC. This adpater is needed only if you do not have a PC near your tester.
Required SIMCHECK II Firmware Version: 1.28 or above
Required RAMCHECK Firmware Version: 2.06 or above
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| INN-8558-4 |
Direct Printer Interface |
$145.00 |
| $143.55 |  |
|
Operation
Install the PAL chip into your SIMCHECK II in accordance with the instructions and drawings in Appendix G.4 of your SIMCHECK II Owner's Manual.
The adapter comes with a short 16-pin IDC cable that connects to SIMCHECK II's IDC socket. Your printer connects directly to the standard 25-pin D-SUB connector on the other side of the adapter.
Once you have installed the PAL chip and connected the printer, you can print the Test Log either manually, or automatically. Selecting either mode is done by entering the following key sequence during Standby Mode:
F2 - Enters SIMCHECK II Setup Menu
F3 - Enters Configuration Setup Menu
F4 - More
F2 - Selects Printer Modes
Use the left or right arrow keys to select the printing mode, then press F1 to enter your choice. In automatic printing mode, the Test Log is printed whenever you return to Standby Mode after a test. In manual printing mode, you can print the current Test Log by pressing F5 while viewing the Test Log.
|
|
;)