Ideal Commutator Maintenance

Commutator Grinders Resurfacers for Grinders Handheld Resurfacers Flexible Abrasives

Seaters & Cleaners Mica Undercutters Milling Cutters

Commutator Grinders Back To Top
Model	Description or Specification
24-033	Midget Precision Grinder Right -angle rack and pinion allows for operation in small areas 6 inch base - recommended for commutator widths up to 9-1/4 inches(includes extra 1 inch travel obtained by setting resurfacers at slight angle)
24-082	Pee-Wee Precision Grinder Compact size for operation in tight areas 2-3/8 inch base - recommended for use on commutators up to 3-3/4 inches wide(includes extra 1 inch travel obtained by setting resurfacers at slight angle) Mounts directly onto brush arm or other support
54-007	Commutator Cement Non-conductor for filling holes in commutator bars and pitted mica Highly adhesive and non-shrinking Resists fire, oils and acids
Resurfacers for Grinders Back To Top
Model	Description or Specification
80-504	Tool-Type Resurfacer For use in IDEAL precision grinders or any type of lathe-turning device Two resurfacers required for each grinder Available in five grades
Handheld Resurfacers Back To Top
Model	Description or Specification
80-012	Small Motor-Type Resurfacer
80-112	Pocket-Type Resurfacer
80-075	Pencil-Type Resurfacer
80-155	Straight Handle Resurfacer
80-305	Railway Handle Resurfacer
80-255	Tramway Handle Resurfacer
80-357	Saw Handle Resurfacer
80-033	Commutator Smoothie Resuracing Tool
Flexible Abrasives Back To Top
Model	Description or Specification
82-001	Powr-Polish Flexible Abrasive Fine-grain, non-dusting abrasive held together by a flexible bond Serves as both commutator cleaner and burnisher Removes dirt and grease - imparts super finished surface Non-conductive and non-loading
Seaters & Cleaners Back To Top
Model	Description or Specification
23-001	Brush Seater and Commutator Cleaner Gentle abrasive for seating carbon brushes and cleaning commutators and slip rings Soft loosely bound grain produces a scouring effect when held against commutator Will not scratch or remove copper Self-cleaning Available in soft (S), medium(M), and hard(H) grades
Mica Undercutters Back To Top
Model	Description or Specification
25-081	Direct-Drive Mica Undercutter Compact tool for shop or job site - 16-1/2 inches long and 8-1/4 pounds Designed for motors or generators with limited access ports 1/5 horsepower, Universal motor operates on 50 and 60 Hz, AC or DC Blows away mica dust while undercutting Three easily interchangable heads for different cutting needs - all feature slot guides to help guide cutter for better control and accuracy
20-006	Slotter and Scraper Cleans slots, smoothes burrs, removes mica fins and bevels sharp copper edges after undercutting Rigid tool-steel bit with V cutting edge at one end and U cutter at the other end 6-1/2 inches long
Milling Cutters Back To Top
Model	Description or Specification
27-200	V-Slot Milling Cutters V-shaped teeth allow one size to cut mica ranging from 0.15 to 0.045" thickness - available in 0.045" thickness only Abundant radial relief provides good clearance Spindle speeds up to 12,000 RPM Designed for commutator mica only

Ideal Main Page

Ideal Price List