|
Hioki 1105-01 In-Circuit HiTester
Click image to enlarge
Hioki 1105-01
|
|
Features:
- Off-line type
- Wide-range measurement
- Maximum of 10,000 measurement steps
- Detection of photocoupler and bias-resistor transistor
- On-Line Maintenance Function
- Pin Contact Integrity Check Function Designed for maintenance of high power lines
Additional Photos
Click image to enlarge
|
Description
|
The 1105 In-Circuit HiTester maintains the performance standards of the 1102 and is capable of stable measurement of even finepitch, high-density boards, due to the rigid press and cabinet. The 1105 also enables maintenance-free operation, as mechanical relays (reed relays) that have a limited operational life have been completely replaced by semiconductor switches in the scanner (MPX board) and the measurement system.
The 1105 can stably inspect even fine-pitch, highdensity boards, due to its substantially rigid press. The fine-pitch pin board (inspection tool) enables straight probing even at a pitch of 0.5 mm. The 1105 can inspect double-sided boards and highdensity boards consisting of chips and flat packages.
Functions:
- Setup of the automatic inspection group
- Setup of various parameters for automatic inspection
- Creation and modification of component data
- Modification of S/O data
- Creation of charge data
- Creation and modification of IC data
- Summation and accumulation of statistical data
- Data saving and loading
- Conversion of data from 1101 to 1102
- Setup of various environmental parameters
- Self-testing
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 1105-01 |
Please call or email us for pricing and availability. |
| 1105-00 |
Please call or email us for pricing and availability. |
| 1105-11 |
Please call or email us for pricing and availability. |
| Model |
Accessories |
List Price |
Sale Price |
| 1131 |
Please call or email us for pricing and availability. |
| 1137 |
Please call or email us for pricing and availability. |
| 1196 |
Recording Paper |
$99.95 |
| $90.95 |  |
|
Specifications
| # of Inspection Points |
|
| Standard: |
320 pins (Expandable in 64 pin Increments) |
| Maximum: |
1024 pins (2048 pins with optional equipment) |
| Inspection Item Ranges |
|
| Resistor: |
0.4 ohms to 40 Mohms |
| Capacitor: |
10 pF to 400 mF |
| Coil: |
1 µH to 400 H |
| Diode,Transistor(VF): |
0.1 V to 25 V |
| Zener Diode(VZ): |
0.1 V to 25 V |
| Digital Transistor(Q): |
0.1 V to 25 V |
| Inspection Signals |
|
| DC Constant Voltage: |
0.1 V, 0.4 V; 2 ranges |
| DC Constant Current: |
200 nA to 20 mA; 6 ranges |
| AC Constant Voltage: |
160 Hz, 0.1 V peak, 1.6 kHz, 0.1 V peak, 16 kHz, 0.1 V peak, 160 kHz, 0.1 V peak |
| Measurement Section |
|
| DC Voltmeter: |
0.4 to 25 Vf.s.; 3 ranges |
| DC Ammeter: |
100 nAf.s. to 25 mAf.s.; 7 ranges |
| AC Ammeter: |
10 µAf.s. to 10 mAf.s.; 4 ranges |
| Evaluation Range: |
–99.9% to +999.9 %, or absolute value |
| Measurement Time |
|
| Short/Open: |
Approx. 1 ms/pin or more |
| Component Testing: |
Approx. 1.5 ms/step or more |
| Self-Testing Function |
|
| Auto: |
Scanner board, measurement section, I/O board |
| Manual: |
Scanner board, measurement section, I/O board, fixture |
| Statistical Functions: |
Calculation of the step-by-step or overall failure rate. Group-by-group and total statistics function |
| Measurable Board Dimensions: |
420 × 300 mm |
| External Storage: |
1 × 3.5-inch FDD; 1 × hard disk |
| Display: |
15-inch CRT (color) |
| External Interface: |
Parallel interface for an external printer , RS-232C port |
| OS: |
MS-DOS |
| Power Supply/Pneumatic Pressure |
|
| Standard: |
100 VAC (±10 %) |
| Also Available: |
120 VAC, 200 VAC, 220 VAC, 240 VAC (±10 %) (specify when ordering) |
| Power Consumption: |
500 VA |
| Pneumatic Pressure: |
0.5 MPa to 1.0 MPa (dry air) |
| Operating Enviornment |
|
| Operating Temperature and Humidity Ranges: |
23° ±10°C, 75 % RH or less |
| Surroundings: |
Avoid use in environments in which the unit will be exposed to dust, vibration, or corrosive gasses. |
| Storage Temperature Range: |
10°C to 43°C |
| Miscellaneous: |
Retesting (reinspection) function for imperfect contact, Failure-map display function, Password setting function, Mask-pin setting function, Screen hard-copy function, and Printout function |
| Dimensions: |
Approx. 1,030(W) × 1,470 (H) × 710(D) mm |
| Weight: |
Approx. 220 kg |
| Standard Accessories: |
1 ×CRT 1 × keyboard, 1 × 2P adapter 1 × system disk, 4 × wing bolts (M6 x 20) 1 × printer, 1 × spare fuse (T3A/250 V), 1 × pin-board attachment set, 5 × fixture extension cables (1152), 1 × test lead set (9046),and 1× printer connection cable |
|
;)
;)
;)
;)