|
The MonitorScope Module Opt 02 allows the display of SD SDI and CST video and audio signals on the 9000 series of Hamlet instruments.
The SD/CST serial input connection is made to the centre silver plated BNC socket, which is internally terminated at 75 ohms. The left BNC provides an equalised output of the input feed and the right BNC allows an external timing reference or AES audio signal to be input.
Simple to exchange modules in the FlexiScope, MicroFlex, MonitorScope 9000 and DigiScope 9000, just remove 2 screws and pull the module out of the main frame, insert new module tighten the 2 screws and you are now ready for a new set of inputs.
Television standards supported by this module:
- Serial Digital video SD 525 is 525
- SD 625 is 625
- Composite video
- PAL
- NTSC
|
;)
