High-performance soldering iron pursuing "usability" and "appearance" has evolved into more than a mere working tool.

Temperature controller achieves 3 factors such as "space saving", "good maintainability" and "good safety and stability"

• Footprint was reduced by approx. 50%
• Use of special driver (resin) for thermal correction during daily inspection maintains durability.
• The temperature control knob can be locked to prevent the setting temperature from changing during the work.

Iron holder provides 3 cleaning methods and low-noise effect

• Sound and vibration generated when placing the iron into the iron holder were reduced by 30%.
• Three types of cleaning methods are available in one iron holder using a cleaning sponge, cleaning wire and rubber cleaner.
• The detachable waste holder at the bottom of iron holder offers an easy way to dispose of the waste.
• The corners on the sponge storage section of the iron holder were rounded to prevent them from coming in contact with hands when placeing the soldering iron.

Ultra-compact size with consideration of environment and ease of use

Space-saving design leaves working area large even in a cell-production site.

Blue and yellow as a HAKKO brand color and metallic color provide an "attractive" worksite.

Blue and yellow	Blue & yellow 2-tone station is provided with the same color iron holder.

Workability comparison graph

The internal structure and tip shape were reviewed to provide better thermal conductivity and better thermal efficiency. As a result, the time for performing the same work was greatly shortened.

Thermal characteristics graph

It was demonstrated that the rise time is approx. 20 seconds faster, and the drop in tip temperature during continuous work is reduced.

3 types of cleaning methods available in one soldering iron holder

Metallic sound and vibration when placing an iron are reduced and solder wastes can be easily disposed of.

FX8801 soldering iron

FH-800 iron holder

Tips for using HAKKO FX-888

1. How to remove the bottom plate.

1. Press the slide lock button inward. Note: Press it firmly from upward. It is easy to open by the slide lock sloping inward.

2. Open the iron holder base while pressing the slide lock.

3. Remove the solder waste in the bottom plate.

2. How to lock the temperature control knob

The temperature control knob can be locked to prevent the setting temperature from changing during the work. In case of locking it, please insert the hexagon wrench into the lower hole and tighten the hexagon screw in the hole counterclockwise. Note: As for unlocking, don't touch the upper hole. Adjust by the upper hole makes the control knob loosen.