|
Hakko FG101-16
Celsius Soldering Station Tester
Click image to enlarge
Hakko FG101-16
|
|
Features:
- Tip temperature, leak voltage and ground resistance of soldering irons can be measured
- Soldering irons can be controlled based on the MIL-HDBK-263B standard.
- SOldering irons can be controlled based on the IPC J-STD.
- MAX HOLD function.
- Leak voltage and ground resistance can be easily meausred.
Includes:
- FG-101 - Soldering tester
- Fuse
- B1752 - Conduction plate
- B1754 - Ground clip
- B1950 - Conductive Wire
- B2419 - Power cord
- 191-212 - Sensor (10)
- Multi-adapter
|
Description
|
The Hakko FG101-16 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. The tester is resistant to drift and ambient temperature variations, ensuring highly reliable and accurate measurements. The MAX HOLD function displays the maximum value.
| FAQ: |
| |
What is 'Leak voltage'? |
| |
Leak current is the current that leaks from the tip to a board or device. Leak voltage is a specific measurement of the level of this current. The leakage can adversely affect delicate devices, so it is necessary to check leak voltage on a daily basis. |
|
What is 'Tip-to-ground resistance'? |
| |
Most leak current flows from the tip via the ground wire to the outlet ground terminal, and is prevented from affecting the device. Because of this, tip-to-ground resistance is another important issue that must be checked daily. |
|
Why is tip temperature important? |
| |
As the tip, element cover and other parts oxidize, heat conduction deteriorates and the tip temperature becomes lower. This causes the difficulty of soldering. Therefore, tip temperature should be inspected daily to have better soldering. |
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| FG101-16 |
TESTER,w/THERMOMETER,C,FG-101,{ATT:FORWARD TO SERV. FOR CAL |
$1141.37 |
| $1095.68 |  |
|
| FG101-10 |
TESTER,w/THERMOMETER,F,FG-101 |
$1141.37 |
| $1095.68 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| A1310 |
PROBE,THERMOCOUPLE,SOLDER POT,FOR 191/192 |
$168.67 |
| $151.17 | |
|
| Model |
Replacement Parts |
List Price |
Sale Price |
| 191-212 |
SENSOR,SET OF 10,LEAD FREE SOLDER,191/191B/192/FG-100 |
| $20.07 | |
|
| B1752 |
PLATE,CONDUCTION,192/FG-101 |
| $9.67 | |
|
| B1754 |
CLIP,GROUND,192/FG-101 |
| $13.77 | |
|
| B1950 |
WIRE,CONDUCTION,mV/RES.TEST,192/FG-101 |
| $5.67 | |
|
| B2419 |
CORD,POWER,FM-202/203/204/205,FR-820,FR HOT AIR,FG-101 |
| $16.77 | |
|
| B2468 |
FUSE,125V-5A,UL/CSA,852/850B/FX-300/301/301B/FR-820/FG-101 |
| $3.37 | |
|
More Info On This Products: Replacement Parts
Accessories
| |
Description |
List Price |
Sale Price |
A1310 |
A1310
PROBE,THERMOCOUPLE,SOLDER POT,FOR 191/192 |
$168.67 |
| $151.17 | |
|
Specifications
| Temperature |
| Resolution |
1°C |
| Measurement Range |
0-700°C*1 |
| Prevision |
±3°C (between 300 and 600°C)
±5°C (other than above) |
| Sensor |
K (CA) type thermocouple |
| Voltage |
| Resolution |
0.1mV |
| Measurement Range |
0 to 40mV (AC) |
| Precision |
±(5% of reading +1 digit) |
| Resistance |
| Resolution |
0.1Ω |
| Measurement Range |
0 to 40Ω |
| Precision |
±(5% of reading +1 digit) |
| Resistance |
| LCD |
3½ digits |
| Over Range*2 |
LCD-Indicator |
| Burnout*3 |
LCD-Indicator |
| MAX HOLD |
Shown as "MAX HOLD" in the lower right on the display |
| |
| Power Consumption |
100V-2.3W, 110V-2.5W, 120V-2.3W, 220V-2.2W, 230V-2.4W, 240V-2.6W |
| Dimensions |
200(W) x 50(H) x 120(D)mm |
| Weight |
1kg |
| Ambient Temperature / Humidity Range |
0-40°C, 20-90%RH (Non condensing) |
| Enviromental Condition |
Applicable rated pollution degree 2 (According to IEC/UL61010-1) |
| |
*1 Temperature sensor (No.191-212) can only be used to measure temperatures below 500*deg;C. To measure higher temperature, use an applicable temperature probe.
*2 An Over Range alarm occurs during temperature measurement when the temperature sensor is not attached, and during voltage and resistance measurement when the tip is not in contact with the conduction plate.
*3 When a sensor burns out, the same alarm symbol as the one for Over Range alarm is also displayed. If this alarm occurs, replace the sensor. |
|
;)
;)
