Furaxa Synth300D Direct Digital Synthesizer PCI Card w/ 2 Channels
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   
Furaxa Synth300D Direct Digital Synthesizer PCI Card w/ 2 Channels



Click image to enlarge

 Furaxa Synth300D
Features:
  • Two independent sinusoids with frequency range from 500kHz to 300MHz
  • Digitally modulated RF signals (4-FSK, 4-PSK)
  • Swept frequency signals- RADAR chirp, etc.
  • Frequency hopped signals


  Description

A Synth300 device is a single or dual-channel Direct Digital Synthesizer (DDS) PCI card bus with one or two independent DDSs, each separately programmable for frequencies between 300KHz and 300MHz in increments of ~0.223 Hz. Frequency accuracy +/-0.01% of specified frequency +/-0.223Hz. A Synth300 device is capable of generating a single tone, two tones, sweeping a range of frequencies, and phase shits. The generated signals may be modulated by switching between four frequency and phase profiles associated with each synthesizer.

Screenshots / Waveforms:

33.333333MHz and 100.000000Mhz simultaneous waveforms Phase-continuous frequency hopping waveform on one channel, single-frequency waveform on other channel 4 SYNTH300 Waveform outputs


  Models, Options, & Accessories


Model Description List Price Sale Price
Synth300D Direct Digital Synthesizer (DDS) PCI card bus, 500 KHz to 300 MHz, two programmable channels
$1995.00 


  Specifications

Input/output
Direct Digital Synthesizer Outputs Synth300S one programmable channel
Synth300D two independently programmable channels
Analog output voltage (into 50 ohms) 500mV RMS ±10% from 2-200MHz
500mV RMS ±20% from .3-300MHz
Output impedance 50 ohms || 10pF
Output connectors Two SMA connectors
Trigger/modulation inputs A & B 2 each TTL (V0l < 0.8V, Vih > 2.4V)
Two SMA connectors
Software programmable outputs 8 each TTL (V0l < 0.8V, Vih > 2.4V)
8mA max output drive
Bandwidth
40MHz Fout Wideband SFDR (DC to Nyquist) - 60 dBc
Narrowband SFDR ± 1 MHz - 87 dBc
Narrowband SFDR ± 50 KHz - 88 dBc
100MHz Fout Wideband SFDR (DC to Nyquist) - 54 dBc
Narrowband SFDR ± 1 MHz - 82 dBc
Narrowband SFDR ± 50 KHz - 86 dBc
180MHz Fout Wideband SFDR (DC to Nyquist) - 53 dBc
Narrowband SFDR ± 1 MHz - 84 dBc
Narrowband SFDR ± 50 KHz - 85 dBc
Output Phase Noise (103MHz Iout)
@100kHz Offset -152 dBc/Hz
@ 1kHz Offset -147 dBc/Hz
@ 10kHz Offset -150 dBc/Hz
Operating characteristics
Frequency accuracy ±0.01% of specified frequency ±0.223Hz
Operating Temperature Range 0 to +55 Degrees Celsius
Storage Temperature Range -25 to +85 Degrees Celsius
Power Requirements SYNTH300D +5V +/-5% at 0.3A Maximum
+3.3V ±5% at 1.5A Maximum
Power Requirements SYNTH300S +5V +/-5% at 0.3A Maximum
+3.3V ±5% at 1.0A Maximum
SYNTH300 boards are half size 32-bit PCI bus boards, which will operate in either 64-bit or 32-bit 33MHz or 66MHz PCI slots with either 5V or 3.3V signaling environment.
To avoid overheating, all SYNTH300 boards must be installed a in well-cooled workstation, PC or server chassis.


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET