|
Fluke PV350
Pressure Vacuum Module
Click image to enlarge
|
Fuel, oil or transmission pressure or engine vacuum.
The PV350 measures gauge pressure; the difference between atmospheric (barometric) pressure
and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1mV dc per unit.
The PV350 is compatible with Industrial gases and liquids that are compatible with 316 stainless steel. The DMM has to have input
impedance of 10M ohms.
|
| Model |
Description |
List Price |
Sale Price |
| PV350 |
PRESSURE/VACUUM MODULE |
$349.31 |
| $330.10 |  |
|
 Click here to download the PV350 Instruction Sheet (PDF, 88kB)
- Pressure Range: 0.5 to 350 psig (3.447 to 2413 kPa)
- Vacuum Range: 0 to 29.9 inch Hg (0 to 76cm Hg).
- Basic Accuracy:
Pressure: +/- (1% of reading + 0.3 psig)
Vacuum: +/- (1% of reading + 0.5 inch Hg)
- Output Signal: 1mV per unit (psi, kPa, cm-Hg, in-Hg)
- Maximum Working Pressure: 500 psi
- Pressure Port Connection: ¼ inch NPT male
- Cable Length: 8 feet
- Safety Standards: Complies with test pressure requirements of ANSI/ISA S82.03-1988. Protection Class III per IEC 1010-1-1990. Annex H.
|
Looking for an accessory not listed here?
Check the Fluke Accessory page or look on the Fluke Price List
|
;)