|
Fluke PAC 91 Printer Adapter Cable
Click image to enlarge
|
PAC 91 Printer Adapter Cable
The PAC 91 makes it possible to connect the optical output of Fluke test tools directly to widely-used parallel printer interfaces. The PAC91 converter has an optical RS-232 (serial) input and a parallel data (Centronics) output.
Features:
- Easy connection: Optical connector hooks directly to Fluke test tools with an optical interface
- Standard, 25-pin connector for Centronics printer cable
- Battery-powered for field use
- Auto Power-off mode helps conserve batteries
- "Busy" and "Power" indicator LED's
- 9600 baud communication speed keeps up with fast printers
|
| Model |
Description |
List Price |
Sale Price |
| PAC91 |
PRINT ADAPTER CABLE |
$253.00 |
| $239.09 |  |
|
 Click here to download the PAC91 Instruction Sheet (PDF, 383kB)
- Optical Input: Optical RS-232, 9600 baud, 8 bits, no parity, 1 stop bit, Xon/Xoff handshake.
- Output: Centronics (TTL levels,), 8 bit parallel with handshake. DB-25 female connector.
- Battery: Alkaline 9V, IEC 6LR61 (NEDA 1604). Battery lifetime >20 hrs. at room temperature.
- Power switch settings: Off / Auto off / On. 'Auto off' mode gives auto power-down 5 minutes after last data transfer.
- Dimensions: 123 x 76 x 30 mm (4.85 x 3 x 1.2 inch); cable length: 30 cm (1 ft).
- Environmental: Temperature range 0oC to +50oC (operating), -40oC to +70oC (storage).
- Warranty: 1 year
- Supported instruments: ScopeMeter test tools, power harmonics analyzers and graphical multimeters.
|
Looking for an accessory not listed here?
Check the Fluke Accessory page or look on the Fluke Price List
|
;)