| General |
| Operating temperature |
32 °F to 104 °F (0 oC to 40 oC) |
| Storage temperature |
-4 °F to +140 °F (-20 oC to +60 oC) |
| Operating relative humidity (% RH without condensation) |
95 % (50 °F to 95 °F; 10 oC to 35 oC) 75 % (95 °F to 104 °F; 35 oC to 40 oC) Uncontrolled < 50 °F (< 10 oC) |
| Vibration |
Random, 2 g, 5 Hz-500 Hz |
| Shock |
1 m drop test with and without module |
| Safety |
EN 61010-1 1st Edition + Amendments 1, 2 |
| Altitude |
3000 m |
| EMC |
EN 61326-1 |
| Battery type and life |
9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications |
Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. POTS telecom service. |
| Legacy tone |
Create and detect 1000 Hz compatible tone |
| Toner Specifications |
| Dimensions |
5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
| Display |
LED |
| Control |
Thumbwheel switch |
| Toner interface |
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring |
| Toner frequency |
IntelliTone signal: encoded digital signal |
| Talk battery voltage |
6V into 600Ω |
| Ouptut power |
5 V p-p |
| Voltage protection |
100V |
| Auto power down |
Turns off automatically after 2 1/2 hours of inactivity |
| Auto power down |
Turns off automatically after 2 1/2 hours of inactivity |
| Probe Specifications |
| Dimensions |
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
| Display |
(8) LED indicators, Synch LED indicator |
| Audio |
Microprocessor controlled audio files |
| Control |
Thumbwheel switch, volume control wheel |
| Tone detection |
Detects IntelliTone digital signal and 1 kHz signal from analog toners. |
| Toner interface |
Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling. |
| Auto power down |
Turns off automatically after 1 hour of inactivity |
