|
FVF-SC4
FlukeView Forms Software
Expand the power of the world's most rugged,
accurate handheld test tools with FlukeView Forms Documenting Software.
|
Click image to enlarge
Fluke FVF-SC4
|
To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms
increases the power of your Fluke Digital Multimeter, Thermometer and ProcessMeter by enabling you to document, store and analyze individual readings or series of measurements,
then convert them into professional-looking documents.
|
FlukeView Forms supports the following test tools:
- Fluke 1550B MegOhmMeter
- Fluke 1653 / 1653B Electrical Installation Tester
- Fluke 180 series
- Fluke 287 and 289
- Fluke 45
- Fluke 53-II and 54-II
- Fluke 568 IR Thermometer
- Fluke 789 ProcessMeter
- Fluke 8808A
- Fluke 8845A/8846A
- Fluke 89-IV and 87-IV
- Fluke 975 AirMeter Test Tool
- Fluke 983 Particle Counter
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| FVF-SC4 |
FLUKEVIEW FORMS W/CABLE FOR 8845/8846 |
| $243.45 |  |
|
| FVF-SC2 |
FLUKEVIEW FORMS WITH CABLE FOR USE WITH 18X, 28X DMMS |
| $187.15 | |
|
| FVF-SC3 |
FLUKEVIEW FORMS W/CABLE FOR 45 DMM |
| $192.85 | |
|
| FVF-SC1 |
FLUKEVIEW FORMS W/CABLE F/53-2,54-2,87-4,89-4 METERS |
| $187.15 | |
|
| FVF-SC5 |
FLUKEVIEW FORMS - BASIC FOR 8845/8846 |
| $102.80 | |
|
| FVF-UG |
FLUKEVIEW FORMS UPGRADE |
$96.45 |
| $78.07 | |
|
|
Click images to enlarge
With FlukeView Forms documenting software, the logging capabilities of handheld test equipment can be used to solve tough problems. You can download the readings from meters into FlukeView Forms to spot trends and document measurement data.
You can instantly review and compare data from up to 6 different meters on the same document - providing analysis capabilities that a meter alone can't provide.
FlukeView Forms comes with an array of standard analysis and reporting forms that get you started on displaying your data in tables, graphs or helpful diagrams. You can leave notes on the forms to draw attention to a particular event.
Or use the FlukeView Forms Plus Designer to customize your reports or add your company logo.
FlukeView Forms communicates with supported tools fast and easily via an infrared serial interface. The software will automatically recognize your meter and transfer the data without any configuration.
Share or store your data with co-workers or clients print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data.
FlukeView Forms Compatibility Chart
| FVF Option |
Instrument |
Cable |
Application Level |
| FVF-UG |
Software only upgrade, from FVF Basic to FlukeView Forms plus Designer** |
No Cable included |
FlukeView Forms plus Designer |
| FVF-SC1 |
Fluke 53-II, 54-II, 87-IV*, 89-IV* |
Serial / IRDA |
| FVF-SC2 |
Fluke 280 Series, 789, 1550B, 1653, 180 Series* |
USB / IR |
| FVF-SC4 |
Fluke 8808A, 8845A, 8846A, 45* |
USB / Serial |
| FVF-BASIC |
Fluke 280 Series, 789, 1550B, 1653, 180 Series* |
USB / IR |
FVF BASIC |
| FVF-SC5 |
Software only** |
No Cable included |
* Obsolete
** For all instruments listed in table |
FlukeView Forms Capability Comparison
| Capabilities |
FlukeView Forms Basic |
FlukeView Forms plus Designer |
| Transfer data points from your meter to your PC |
X |
X |
| Number of standard forms |
2 |
9 |
| Able to modify standard forms |
No |
Yes |
| Includes FlukeView Forms Designer for customizing forms |
No |
Yes |
| Number of multiple meters whose data can be viewed simultaneously |
1 |
8 |
| Number of concurrently running instances of FlukeView Forms allowed |
1 |
4 |
| Ability to change company name on report |
No |
Yes |
| Supports multi-page forms |
No |
Yes |
Using FlukeView Forms with Multimeters, Thermometers, MegOhmeters
and ProcessMeter™ tools
For the meters, you can measure and store hundreds of readings to the meter's internal memory, and then later download the information to FlukeView Forms. For meters that do not have internal memory, such as the Fluke-187, Fluke-789 and the Fluke-45, you can take interactive readings while connected to your PC with FlukeView Forms.
FlukeView Forms also logs events to make analyzing your data easier. This unique method of data recording provides more detailed readings when the input signal changes significantly. The amount of signal change that will trigger an event can be adjusted to fit your specific test situation. The minimum, maximum and average of readings are recorded for each event. Logging sessions can also be configured so that data will be recorded over specific intervals (e.g., every 5 minutes or 30 seconds).
Using FlukeView Forms with Fluke 1653B Installation tester
Up to 500 test results can be stored in the Fluke 1653B installation tester. The data stored for each measurement consists of the test function, user selectable test conditions and unique references. The results can be uploaded for preparing professional reports. These reports can easily be customized to suit individual requirements as well as compliance with local regulations. Standard formats as well as localized forms for Germany (ZVEH), Austria (ÖVE) and Switzerland (electrosuisse, gem. NIV) are also available.
Not supported in FlukeView Forms Basic
New Features in FlukeView Forms 3.4
- Increased Vista compatiblilty using HTML Help and digital signatures.
- Added capability to support the 289 firmware upgrade for Names List and saving meter screen shots.
- Added capability to support the 8846A firmware update and auto detection of the meters in native mode.
- Added the 975 USB driver directory to the FlukeView Forms directory during installation
- Modified the event data exported from the "File/Export Data" dialog to provide greater resolution on timestamps and an additional 'table' to support easier graphing/processing of the sample/max/min readings.
- Corrected a problem whereby users in the Southern Hemisphere, when transferring data from an attached meter (289/287, 568, or 975) to FlukeView Forms, the timestamps may be off by an hour. Now correctly displays the timestamps.
Operating System Requirements:
- Windows Me, Windows 2000, Windows XP or Windows Vista
Minimum Recommended PC Hardware:
- Pentium class or better microprocessor
- 32 MB RAM
- 70 MB hard disk space (100 MB to install)
- Serial or USB port
Models:
- FVF-SC1: FlukeView Forms 2.0 Software with cable for Fluke 50 Series II thermometers and 80 Series IV digital multimeters
- FVF-SC2: FlukeView Forms 2.0 Software with cable for Fluke 180 Series digital multimeters and Fluke 789 ProcessMeter
- FVF-SC3: FlukeView Forms 2.0 Software with serial cable for Fluke 45 Bench Meters
- FVF-SC4: FlukeView Forms Software with cable (8808A, 8845A, 8846A, 45 Bench Meter)
- FVF-SC5: FlukeView Forms Basic Software - no Cable (For all instruments listed above.)
- FVF-UG: FlukeView Forms Software Upgrade (no cable) - upgrade from previous versions of FlukeView Forms
|
Specifications
| Size |
203 x 100 x 50 mm |
| Weight |
545 g |
 Looking for an accessory not listed here?
Check the Fluke Accessory page or look on the Fluke Price List
|
;)
