|
Fluke Industrial introduces the BP120MH, a new battery pack for use as
replacement battery in the Fluke 120- series ScopeMeters and in the Fluke 43
and 43B Power Quality Analyzers. The BP120MH is a Nickel-Metal-Hydride Battery
Pack, made specifically to support the ScopeMeters and Power Quality Analyzers mentioned.
The battery capacity is 3000 mAh, this is 50% more than that of the original
BP120. As a results, the instrument-user will benefit from a much longer ‘up
time’ than with the original NiCd battery, at the same volume and weight.
The BP120MH is more environmental-friendly than the NiCd battery used before,
as it contains no heavy metals. Just as before, the battery pack can be charged
while installed in the instrument, using the PM8907 power adapter/charger.
The BP120MH may also be used in the Fluke 124 ScopeMeter, replacing the BP130.
- Nominal Voltage: 4.8V
- Capacity: 3000 mAh
The BP120MH battery has the same electrical specification as the BP130 but
it uses a different connection scheme. Therefore, these batteries are not interchangeable.
See the table below for compatibility with individual test instruments.
| Test Instrument |
serial numbers |
recommended replacement battery
possible replacement batteries |
| Fluke 123 ScopeMeter, V1.xx |
< DM 8196xxx |
BP120MH, BP120 |
| Fluke 123 ScopeMeter, V2.xx |
= DM 8196xxx |
BP120MH, BP120, BP130 |
| Fluke 124 ScopeMeter |
all |
BP120MH, BP120, BP130 |
| Fluke 43 Power Quality Analyzer |
all |
BP120MH, BP120 |
| Fluke 43B Power Quality Analyzer |
all |
BP120MH, BP120 |
|
